|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www..com DN1509 N-Channel Depletion-Mode Vertical DMOS FET Features High input impedance Low input capacitance Fast switching speeds Low ON-resistance Free from secondary breakdown Low input and output leakages General Description The Supertex DN1509 is suitable for high voltage transient protection for LDO in automobile applications during "load dump" conditions. This low threshold, depletion-mode (normally-on) transistor utilizes an advanced vertical DMOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Applications Normally-on switches Battery operated systems Converters Linear amplifiers Constant current sources Telecom Ordering Information Device DN1509 Package Option TO-243AA (SOT-89) DN1509N8-G Product marking for TO-243AA: BVDSX/BVDGX 90V RDS(ON) (max) 6.0 IDSS (typ) 540mA where DN5A = 2-week alpha date code -G indicates package is RoHS compliant (`Green') Absolute Maximum Ratings Parameter Drain to source voltage Drain to gate voltage Gate to source voltage Operating and storage temperature Soldering temperature 1 Pin Configuration Value BVDSX BVDGX 20V D -55C to +150C +300C G D (Top View) S Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. Note 1. Distance of 1.6mm from case for 10 seconds. TO-243AA (SOT-89) DN1509 Electrical Characteristics (T =25C unless otherwise specified) A Symbol Parameter Min Typ Max Units Conditions BVDSX VGS(OFF) VGS(OFF) IGSS ID(OFF) IDSS RDS(ON) RDS(ON) GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD trr Drain-to-source breakdown voltage Gate-to-source OFF voltage VGS(OFF) change with temperature Gate body leakage Drain-to-source leakage current Saturated drain-to-source current Static drain-to-source ON-state resistance Change in RDS(ON) with temperature Forward transconductance Input capacitance Common source output capacitance Reverse transfer capacitance Turn-ON delay time Rise time Turn-OFF delay time Fall time Diode forward voltage drop Reverse recovery time 90 -1.8 300 200 - 540 3.2 70 20 6.0 12 16 15 25 400 -3.5 4.5 100 1.0 1.0 6.0 1.1 150 40 15 30 45 45 60 1.8 - V V mV/ C nA A mA mA %/OC mmho pF O VGS = -5V, ID = 1.0A ID = 10A VDS = 15V, ID = 10A VGS = 20V, VDS = 0V VDS = Max rating, VGS = -5.0V VDS = 0.8 Max Rating, VGS = -5.0V, TA = 125OC VGS = 0V, VDS = 25V VGS = 0V, ID = 200mA VGS = 0V, ID = 200mA VDS = 10V, ID = 200mA VGS = -10V, VDS = 25V, f = 1MHz ns VDD = 25V, ID = 100mA, RGEN = 25 VGS = 0V, ISD = 500mA VGS = 0V, ISD = 500mA V ns Notes: 1.All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2.All A.C. parameters sample tested. Thermal Characteristics Package TO-243AA (continuous) ID ID (pulsed) Power Dissipation @TA = 25OC JC (OC/W) JA (OC/W) IDR 360mA IDRM 500mA 360mA 500mA 1.6W 15 78 Notes: ID (continuous) is limited by max rated TJ of 150OC. Mounted on FR4 board, 25mm x 25mm x 1.57mm. Switching Waveforms and Test Circuit 0V Input -10V 10% t (ON) td(ON) VDD Output 0V 10% 90% tr t (OFF) td(OFF) tf 10% Input 90% Pulse Generator RGEN 90% VDD RL OUTPUT D.U.T 2 DN1509 TO-243AA (SOT-89) Package Outline (N8) 4.50 0.10 1.72 0.10 0.40 0.05 Exclusion Zone 1.50 0.10 4.10 0.15 2.45 0.15 2.21 0.08 No Vias/Traces in this area. Shape of pad may vary. 1.05 0.15 0.42 0.06 1.50 BSC 3.00 BSC 0.5 0.06 Top View Side View Bottom View Notes: 1. All dimensions are in millimeters; all angles in degrees. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Doc.# DSFP-DN1509 NR111006 3 |
Price & Availability of DN1509 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |