 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| REV-03(Issued Date. 18-Oct-04) Product Data Sheet www..com FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE VSR5A/B VITonet Co., Ltd. http://www.vitonet.co.kr VITonet C VSR5A FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE VSR5A FEATURES Data Rate : 12Mbps, NRZ signal Directly connectable to demodulation IC OUTLINE DIMENSIONS Unit [mm] www..comdigital audio equipment for APPLICATIONS AC-3 amp PC-sound card MD player Unspecification tolerance : 3/4 0.3mm A 1. ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage High Level Output Current Low Level Output Current Operating Temperature Storage Temperature Soldering Temperature[1] [Ta=25E ] RATING -0.5 ~ +7 -1 4 -20 ~ +70 -30 ~ +80 260 SYMBOL Vcc IOH IOL Topr Tstg Tsol UNIT V mA mA E E E Note [1] : Soldering time=5 seconds 2 times or less VITonet C VSR5B FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE VSR5B FEATURES Data Rate : 12Mbps, NRZ signal Directly connectable to demodulation IC OUTLINE DIMENSIONS Unit [mm] www..comdigital audio equipment for APPLICATIONS AC-3 amp PC-sound card MD player Unspecification tolerance : 3/4 0.3mm A 1. ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage High Level Output Current Low Level Output Current Operating Temperature Storage Temperature Soldering Temperature[1] [Ta=25E ] RATING -0.5 ~ +7 -1 4 -20 ~ +70 -30 ~ +80 260 SYMBOL Vcc IOH IOL Topr Tstg Tsol UNIT V mA mA E E E Note [1] : Soldering time=5 seconds 2 times or less VITonet C VSR5A/B [Ta=25E Refer to Fig.1 Refer to Fig.1 Refer to Fig.2 Refet to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.4 , Pc=-15dBm - 2. ELECTRICAL AND OPTICAL CHARACTERISTICS PARAMETER Operating Voltage Peak Sensitivity Wavelength Maximum Input Optical Power for Receiving Unit Minimum Input Optical Power for Receiving Unit Dissipation Current High Level Output Voltage Low Level Output Voltage www..com Rise Time ] MIN 4.75 -14.5 3.5 -30 - SYMBOL Vcc e p CONDITIONS TYP. 5 700 10 4.0 0.1 15 9 1 - MAX 5.25 -24 40 0.4 30 30 100 100 +30 30 12 20 UNIT V nm dBm dBm mA V V ns ns ns ns ns ns Mbps m PCMAX PCMIN Icc VOH VOL tr tf tpLH tpHL a a tw tj T - Fall Time Lowae Highae High Propagation Delay Time Low Propagation Delay Time Pulse Width Distortion Jitter Operating Transfer Rate Transmission Distance A 3. RELIABILITY The Reliability of products shall be satisfied with items listed below. Reliability level : 90%, LTPD :10%/20% NO. 1 2 3 4 TEST ITEMS High temp. and high humidity storage High temp. storage Low temp. storage Temperature cycling TEST CONDITIONS Ta=40E Ta=80E Ta=-30E Ta=-30E , 90%R.H , 500H. , 500H ~ +80E 500H. FAILURE JUDGEMENT CRITERIS Each characteristic given in A Non. 4~10 must be within the following range. 2 SAMPLES (n) DEFECTIVE (c) n=22, c=0 n=22, c=0 n=22, c=0 n=22, c=0 (30min) (30min) 20 cycle test Ta=60E Vcc=5V, 500H. Ta=2603/4 10E 5 sec/2 times Weight : 500g 30 sec./each terminal Weight : 250g 0AE -90AE -0AE 2 times/each terminal Acceleration : 100G Pulse width : 6ms X, Y, Z/3 times each Frequency range: 10~55Hz/sweep 1 min. Overall amplitude: 1.5(R) X, Y, Z/2H, each 500 times (fiber optics cable VITonet used) U L 1.2 or less 0.8 or more n=22, c=0 n=11. c=0 5 6 7 High temp. operation life Soldering heat Terminal strength (Tension) Terminal strength (Bending) U : Upper limit L : Lower limit n=11, c=0 8 n=11, c=0 9 Shock n=11, c=0 10 Vibration n=11, c=0 11 Repeated operation Coupling forceA 4kg, 0.6kgA detaching forceA 4kg n=11, c=0 A 3.1 MEASUREMENT In the test 7~11 above, to measure the characteristics, leave 2 hours at normal temperature and humidity after being tested. VITonet c VSR5A/B ower Level Fig.1 Maximum Input Optical Powe r Level/Minimum Input Optical P Measuring Method of Receiving Unit Standard Transmitter www..com Variable optical attenuator VSR5A/B Note : (1) Optical power meter must be calibrated to have the wavelen g th sensitivit y of 660nm Optical power meter (Haktronics) Photom 205A Fig.2 Measuring Method of Dissipation Current Standard Transmitter VIN VCC GND VCC Input VSR5A/B VCC D GND VCC Vout A Vcc=5.00.05V 3/4 Ammeter (DC average current value) 6Mbps NRZ "1010 " successive pattern VSR5A/B c Fig.3 Measuring Method of Output Voltage and Pulse Standard Transmitter VIN VCC GND D www..com VSR5A/B VCC VCC GND RSO Vout Vcc=5.00.05V 3/4 Oscilloscope CH1 RSi Input 6Mbps NRZ Standard Transmitter Input Signal (CH1) VSR5A/B Output Signal (CH2) "1010 " successive p attern 50% CH2 Notes (1) Vcc=5.03/40.05V(Operating) (2) Rsi, Rso : Standard load resistance (Rsi:3.3K 90% 50% tr VOH tf U , Rso:2.2K U ) VOL 10% t PLH t PHL Fig.4 Measuring Method of Jitter Standard Transmitter VIN VCC GND VCC Vcc=5.00.05V 3/4 D Oscilloscope CH1 Input VSR5A/B VCC VCC GND Vout RSO RSi 6Mbps NRZ "1010 " successive pattern CH2 Note (1) Rsi, Rso : standard load resistance (Rsi:3.3K *Oscilloscope Trigger:CH1 *Storage mode Sweep :AUTO/NORM Input 50% U , Rso:2.2K U ) VSR5A/B Out p ut 50% (2) Vcc=5.03/40.05V (Operating) (3) Set the oscilloscope to be storage mode and write time to 4 seconds tj tj www..com VITonet Co., Ltd. URL. : http://www.vitonet.co.kr E-MAIL : vitonet@vitonet.co.kr HEAD OFFICE & FACTORY R&D CENTER : #2309, Production Hall, 43-5, Sameum-Ri, Jiksan-Eub, Chunan-city, Chungnam, 330-816, Korea TEL : 82-41-583-6136~8 / FAX : 82-41-585-1407 #2401, Bunyooung Hall, 43-1, Sameum-Ri, Jiksan-Eub, Chunan-city, Chungnam, 330-816, Korea TEL : 82-41-583-4741~2 / FAX : 82-41-583-4743 : |
Price & Availability of VSR5A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |