 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 8 PIN SOP 100 V BREAKDOWN VOLTAGE 2-CH OPTICAL COUPLED MOSFET FEATURES * DUAL CHANNEL: 1a + 1a output * LOW LED OPERATING CURRENT: IF = 2 mA * DESIGNED FOR AC/DC SWITCHING LINE CHANGER * SMALL AND THIN PACKAGE: 8-pin SOP, Height = 2.1 mm * LOW OFFSET VOLTAGE * AVAILABLE IN TAPE AND REEL PS7211-2A DESCRIPTION The PS7211-2A is a solid state relay containing GaAs LEDs on the light emitting side (input side) and MOSFETs on the output side. It is suitable for analog signal control because of its low offset and high linearity. APPLICATIONS * EXCHANGE EQUIPMENT * MEASUREMENT EQUIPMENT * FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25C) PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 10 mA Reverse Current, VR= 5 V Off-state Leakage Current, VD = 100 V Output Capacitance, VD = 0 V, f = 1 MHz LED On-state Current, IL = 100 mA On-state Resistance, IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 100 mA, t 10 ms Turn-on Time1 IF = 10 mA, VO = 5 V, PW 10 ms Turn-off Time1 Isolation Resistance, VI-0 = 1.0 KV Isolation Capacitance, V = 0 V, f = 1 MHz UNITS V A A pF/ch mA ms pF/ch 109 0.4 3.4 0.16 0.02 0.03 57 2.0 6.0 1.0 0.2 MIN PS7211-2A TYP 1.2 MAX 1.4 5 1.0 MOSFET Diode VF IR ILoff Cout IFon RON1 RON2 tON tOFF RI-0 CI-0 Note: 1. Test Circuit for Switching Time: PS7211-2A IF Pulse Input VL Input 50% 0 Coupled 8 7 6 5 Input Monitor Rin RL VO Monitor VO = 5 V Output 90% 10% ton toff 1 2 3 4 California Eastern Laboratories PS7211-2A ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS Diode IF VR PD IFP MOSFET VL IL ILP PD Coupled BV PT TOP TSTG PARAMETERS UNITS RATINGS RECOMMENDED OPERATING CONDITIONS (TA = 25C) PART NUMBER PS7211-2A UNITS mA V MIN TYP MAX 2 0 10 20 0.5 SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current2 mA V mW/ch A 50 5 50 1 Break Down Voltage Continuous Load Current Pulse Load Current3 AC/DC Connection Power Dissipation Isolation Voltage4 Total Power Dissipation Operating Temperature Storage Temperature V mA mA mW/ch V mW C C 100 100 ORDERING INFORMATION 260 180 1500 460 -40 to +80 -40 to +100 PART NUMBER PS7211-2A PS7211-2A-F3 PS7211-2A-F4 PACKAGE 8 PIN SOP PACKING STYLE Magazine case 45 pcs Embossed tape 1500 pcs/reel Notes: 1. Operation in excess of any one of these parameters may result in permanent damage 2. PW = 100 s, Duty Cycle 1%. 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS7211-2A 0.40.3 9.080.5 8 TOP VIEW 7 6 5 1 2 3 7.00.3 4.4 4 1. 2. 3. 4. 5. 6. 7. 8. LED Anode LED Cathode LED Anode LED Cathode MOSFET MOSFET MOSFET MOSFET 2.05 +0.08 -0.05 0.5 -0.05 +0.08 +0.10 0.15 -0.05 2.54 0.40 +0.10 -0.05 0.5 0.3 PS7211-2A TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 150 MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Maximum Forward Current, IF (mA) 80 Maximum Forward Current, IF (mA) 100 60 40 50 20 0 -25 0 25 50 75 80 100 0 -25 0 25 50 75 80 100 Ambient Temperature, TA (C) Ambient Temperature, TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 125 OUTPUT CAPACITANCE vs. APPLIED VOLTAGE f = 1 MHz Output Capacitance, Cout (pF) Forward Voltage, VF (V) 100 1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1.0 1 mA 75 50 25 0.8 -25 0 0 25 50 75 100 0 20 40 60 80 100 125 Ambient Temperature, TA (C) Applied Volltage, VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10 -3 LOAD CURRENT vs. LOAD VOLTAGE IF = 10 mA Off-state Leakage Current, ILoff (A) 200 10 -4 Load Current, IL (mA) 10-5 100 TA = 80C 10-6 -1.0 -0.5 0 0.5 1.0 10 -7 25C 10-8 -100 -200 10 -9 0 20 40 60 80 100 120 Applied Volltage, VD (V) Load Volltage, VL (V) PS7211-2A TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 n = 50 pcs IF = 0 mA IL = 10 mA Normalized On-state Resistance, Ron () 3.0 Normalized to 1.0 at TA = 25 C IF = 10 mA IL = 10 mA 2.5 25 1.5 Number (pcs) 0 25 50 75 100 2.0 20 15 1.0 10 0.5 5 0.0 -25 0 3.2 3.3 3.4 3.5 3.6 Ambient Temperature, TA (C) On-state Resistance, Ron () TURN-ON TIME vs. FORWARD CURRENT 2.5 VO = 5 V TURN-OFF TIME vs. FORWARD CURRENT 0.5 VO = 5V 0.4 Turn-on Time, ton (ms) 2.0 1.5 Turn-off Time, toff (ms) 0 5 10 15 20 25 30 0.3 1.0 0.2 0.5 0.1 0 0 0 5 10 15 20 25 30 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION 30 n = 50 pcs IF = 10 mA VO = 5 V 30 TURN-OFF TIME DISTRIBUTION n = 50 pcs IF = 10 mA VO = 5 V 25 25 Number (pcs) 15 Number (pcs) 0.1 0.2 0.3 0.4 0.5 20 20 15 10 10 5 5 0 0 0.02 0.04 Turn-on Time, ton (ms) Turn-off Time, toff (ms) PS7211-2A TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-on Time, ton (ms) 2.5 Normalized Turn-off Time, toff (ms) Normalized to 1.0 at TA = 25 C IF = 10 mA VO = 5 V 2.5 Normalized to 1.0 at TA = 25 C IF = 10 mA VO = 5 V 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 -25 0 25 50 75 100 0.0 -25 0 25 50 75 100 Ambient Temperature, TA (C) Ambient Temperature, TA (C) TAPING SPECIFICATIONS (Units in mm) TAPE OUTLINE AND DIMENSIONS 2.0 0.1 4.0 0.1 1.75 0.1 1.55 0.1 2.8 0.1 PS7211-2A-F3 TAPE DIRECTION PS7211-2A-F4 7.5 0.1 10.45 0.1 16.0 0.3 0.3 1.55 0.1 7.6 0.1 12.0 0.1 REEL OUTLINE and DIMENSIONS 2.5 21.0 0.8 2.0 0.5 1005.0 330 13.01.0 16.4 -0.0 +2.0 PS7211-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (C) (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) Time (s) (2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based cleaning solvent. * Avoid shorting between portion of frame and leads. * * * : Portion of frame Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 DATA SUBJECT TO CHANGE WITHOUT NOTICE Internet: http://WWW.CEL.COM 10/08/2001 |
Price & Availability of PS7211-2A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |