 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Crimp PH CONNECTOR Disconnectable Crimp style connectors * Reliable contact * Easy and effective crimping Emboss Tape 2.0mm (.079") pitch Features ----------------------- The contact has long dimples near the center to ensure a good connection at all times, even under conditions of vibration and mechanical abuse, and when used with low voltage and low current circuits. Although the contact is compact, it has a long wire strip holding length of 2.6 +/- 0.4mm (.102" +/-.016"). This long length simplifies automatic crimping and the crimping of shielded wires. * Fully shrouded header The fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants. * High solderable square post The square post is copper-undercoated and tin/lead-plated for superior solderability and for whisker prevention. * Printed circuit board retention mechanism This is a thin, low-profile 2.0mm (.079") pitch connector 7.5mm (.295") in height after mounting and 4.5mm (.177") in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately. * Compatible with the KR insulation displacement connector The same shrouded header can be used for either PH crimpstyle connector or KR insulation displacement connector. This allows both types of connector to be used interchangeably without replacing the header. * Surface mount model (SMT) This connector is also available in a surface mount configuration. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products. Specifications ------------------ 2 3 4 16 5 6 * Current rating: 2A AC, DC (AWG #24) * Voltage rating: 100V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 800V AC/minute * Applicable wire: AWG #32 to #24 * Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063") * Contact JST for details Standards --------------------- 0 1 2 Recognized E60389 Certified LR20812 R75087 PH CONNECTOR Contact ----------------------------------------------------------------- Model No. mm2 SPH-002T-P0.5S 0.05 to 0.22 0.032 to 0.08 Applicable wire AWG # 30 to 24 32 to 28 Insulation O.D. mm(in.) 0.9 to 1.5(.035 to .059) 0.5 to 0.9(.020 to .035) Q'ty / reel 8,000 10.000 5.7(.224) 2.85(.112) 2.05(.081) 1.0 (.039) 2.08 (.082) SPH-004T-P0.5S Material and Finish Phosphor bronze, tin-plated 1.5 (.059) Note: 1. When using AWG#32 or #30 wires, reflow-treated headers (Low insertion force type, Model no. B#B-PH-KL or S#B-PH-KL) are recommendable. Note: 2. Contact JST for gold-plated contacts. Housing ----------------------------------------------------------------- Circuits 2 3 4 Model No. PHR- 2 PHR- 3 PHR- 4 PHR- 5 PHR- 6 PHR- 7 PHR- 8 PHR- 9 PHR-10 PHR-11 PHR-12 PHR-13 PHR-14 PHR-15 PHR-16 Dimensions mm(in.) A 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) B 5.8( .228) 7.8( .307) 9.8( .386) 11.8( .465) 13.8( .543) 15.8( .622) 17.8( .701) 19.8( .780) 21.8( .858) 23.8( .937) 25.8(1.016) 27.8(1.094) 29.8(1.173) 31.8(1.252) 33.8(1.331) Q'ty / box 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 B 1.9 (.075) Circuit No.1 2.0 (.079) A 0.5 (.020) 4.5(.177) 5 6 7 8 9 10 6.35(.250) 11 12 13 0.6(.024) 14 15 16 Material and Finish Nylon 66, UL94V-0, natural (white) Through-hole type PC board layout (viewed from soldering side) and Assembly layout --- Top entry type 2.00.05 1.9 (.079.002) (.075) min. 2.8 (.110) min. 4.5 (.177) Side entry type 2.00.05 1.9 (.079.002) (.075) min. 6.25 (.246)min. 9.6(.378) 7.6(.299) 4.8(.189) 8.0(.315) 6.0(.236) 0.7 + 0.1 0 .004 (.028 + 0 )dia. 0.1 0.7 + 0 .004 (.028 + 0 )dia. 6.25 (.246) Note: 1. Tolerances are non-cumulative: 0.05mm(.002") for all centers. 2. Hole dimensions differ according to the kind of printed circuit board and piercing method. If printed circuit boards made of hard material such as FR-4 are used, the hole dimensions should be larger. The hole dimensions shown above are reference values. Contact JST for details. 17 PH CONNECTOR Through-hole type shrouded header ----------------------------------------- The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors. Top entry type (2 circuits) B 4.5(.177) 1.7(.067) Model No. Dimensions mm(in.) A 2.0( .079) 4.0( .157) 6.0( .236) Q'ty / box Top entry type 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 250 250 250 250 (3 circuits or more) B 4.5(.177) 1.7(.067) Circuits 2 3 6.0(.236) Top entry type B 2B-PH-K-S B 3B-PH-K-S B 4B-PH-K-S B 5B-PH-K-S B 6B-PH-K-S B 7B-PH-K-S B 8B-PH-K-S B 9B-PH-K-S B10B-PH-K-S B11B-PH-K-S B12B-PH-K-S B13B-PH-K-S B14B-PH-K-S B15B-PH-K-S B16B-PH-K-S Side entry type S 2B-PH-K-S S 3B-PH-K-S S 4B-PH-K-S S 5B-PH-K-S S 6B-PH-K-S S 7B-PH-K-S S 8B-PH-K-S S 9B-PH-K-S S10B-PH-K-S S11B-PH-K-S S12B-PH-K-S S13B-PH-K-S S14B-PH-K-S S15B-PH-K-S S16B-PH-K-S B 5.9( .232) 7.9( .311) 9.9( .390) Side entry type 1,000 1,000 500 500 500 500 250 250 250 250 250 250 250 200 200 6.0(.236) 4 5 6 7 8 9 10 11 8.0( .315) 11.9( .469) 10.0( .394) 13.9( .547) 12.0( .472) 15.9( .626) 14.0( .551) 17.9( .705) 16.0( .630) 19.9( .783) 18.0( .709) 21.9( .862) 20.0( .787) 23.9( .941) 22.0( .866) 25.9(1.020) 24.0( .945) 27.9(1.098) 26.0(1.024) 29.9(1.177) 28.0(1.102) 31.9(1.256) 30.0(1.181) 33.9(1.335) 1.95 (.077) A 0.5 (.020) 3.4 (.134) Circuit No.1 1.95 (.077) 2.0 (.079) A 0.5 (.020) Circuit No.1 Side entry type B 4.8(.189) 1.7(.067) 3.4 (.134) 12 13 6.25(.246) 6.0(.236) 14 15 16 1.95 (.077) 2.0 (.079) A 0.5 (.020) 1.6 (.063) Circuit No.1 3.4 (.134) Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) Through-hole type shrouded header Top entry type (2 circuits) B 4.5(.177) 1.7(.067) Model No. Dimensions mm(in.) A 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) Q'ty / box Top entry type 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 250 250 250 250 (3 circuits or more) B 4.5(.177) 1.7(.067) Circuits 2 3 Top entry type Side entry type B 5.9( .232) 7.9( .311) 9.9( .390) 11.9( .469) Side entry type 1,000 1,000 500 500 500 500 250 250 250 250 250 250 250 200 200 B 2B-PH-KL S 2B-PH-KL B 3B-PH-KL S 3B-PH-KL B 4B-PH-KL S 4B-PH-KL B 5B-PH-KL S 5B-PH-KL 6.0(.236) 6.0(.236) 4 5 6 3.4 (.134) B 6B-PH-KL S 6B-PH-KL 10.0( .394) 13.9( .547) B 7B-PH-KL S 7B-PH-KL 12.0( .472) 15.9( .626) B 8B-PH-KL S 8B-PH-KL 14.0( .551) 17.9( .705) B 9B-PH-KL S 9B-PH-KL 16.0( .630) 19.9( .783) B10B-PH-KL S10B-PH-KL 18.0( .709) 21.9( .862) B11B-PH-KL S11B-PH-KL 20.0( .787) 23.9( .941) B12B-PH-KL S12B-PH-KL 22.0( .866) 25.9(1.020) B13B-PH-KL S13B-PH-KL 24.0( .945) 27.9(1.098) B14B-PH-KL S14B-PH-KL 26.0(1.024) 29.9(1.177) B15B-PH-KL S15B-PH-KL 28.0(1.102) 31.9(1.256) - S16B-PH-KL 30.0(1.181) 33.9(1.335) 3.4 (.134) 1.95 (.077) A 0.5 (.020) 7 8 Circuit No.1 1.95 (.077) 2.0 (.079) A 0.5 (.020) Circuit No.1 9 10 Side entry type B 4.8(.189) 1.7(.067) 11 12 13 6.25(.246) 6.0(.236) 14 15 16 1.95 (.077) 2.0 (.079) A 0.5 (.020) 1.6 (.063) Circuit No.1 3.4 (.134) Material and Finish Post: Phosphor bronze, copper-undercoated, tin/lead-plated (reflow-treated) Wafer: Nylon 66, UL94V-0, gray 18 PH *The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors. *SMT type shrouded headers are not TUV approved. CONNECTOR SMT type shrouded header ------------------------------------------------- SM type Top entry type B 1.95 (.075) A 2.0(.079) 5.0 (.197) 1.9(.075) 3.1 (.122) Model No. Circuits 2 4 5 7 10 6.6(.260) Dimensions mm(in.) A 2.0(.079) 6.0(.236) 8.0(.315) Top entry type B2B-PH-SM B4B-PH-SM - - - Side entry type - - S 5B-PH-SM B 5.9(.232) 9.9(.390) 11.9(.469) 15.9(.626) 21.9(.862) 23.9(.941) C 4.7(.185) 8.7(.343) 10.7(.421) 14.7(.579) 20.7(.815) 22.7(.894) Q'ty / box 1,000 500 500 500 250 250 B7B-PH-SM S 7B-PH-SM 12.0(.472) S10B-PH-SM 18.0(.709) S11B-PH-SM 20.0(.787) 11 Material and Finish 3.2 (.126) 1.0 (.039)dia. 1.35(.053) C Post: Brass, nickel-undercoated, tin/lead-plated Wafer: PPS, UL94V-0, brown Side entry type B 1.95 (.077) A 2.0(.079) 5.0(.197) 1.9(.075) 1.35(.053) C 0.8(.031) 1.0 (.039)dia. 3.0 1.6 (.118) (.063) 6.0(.236) 3.4(.134) SM3 type Top entry type (with solder tabs) B 2.975 (.117) A 2.0(.079) 5.0 2.0 (.197) [ (.079) ] 1.9(.075) Model No. Circuits 2 3 4 5 Dimensions mm(in.) A 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) Top entry type Side entry type B 7.9( .311) 9.9( .390) 11.9( .469) 13.9( .547) 15.9( .626) 17.9( .705) 19.9( .783) 21.9( .862) 23.9( .941) 25.9(1.020) 27.9(1.098) 29.9(1.177) 31.9(1.256) 33.9(1.335) 35.9(1.413) Q'ty / reel 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 B 2B-PH-SM3-TB S 2B-PH-SM3-TB B 3B-PH-SM3-TB S 3B-PH-SM3-TB B 4B-PH-SM3-TB S 4B-PH-SM3-TB B 5B-PH-SM3-TB S 5B-PH-SM3-TB B 6B-PH-SM3-TB S 6B-PH-SM3-TB B 7B-PH-SM3-TB S 7B-PH-SM3-TB B 8B-PH-SM3-TB S 8B-PH-SM3-TB B 9B-PH-SM3-TB S 9B-PH-SM3-TB B10B-PH-SM3-TB S10B-PH-SM3-TB B11B-PH-SM3-TB - B12B-PH-SM3-TB S12B-PH-SM3-TB B13B-PH-SM3-TB S13B-PH-SM3-TB B14B-PH-SM3-TB S14B-PH-SM3-TB B15B-PH-SM3-TB S15B-PH-SM3-TB B16B-PH-SM3-TB - 6.6(.260) 6 7 8 1.4 (.055) 2.2 (.087) 9 10 11 12 Circuit No.1 Side entry type 13 14 15 5.5(.217) 2.4(.094) 16 Material and Finish 1.6 (.063) 6.0(.236) 2.0 2.95 (.079) (.116) A B 2.6 [ (.102) ] Post: Copper alloy, copper-undercoated, tin/lead-plated Wafer: Nylon 46, UL94V-0, natural (white) Solder tab: Brass, copper-undercoated, tin/lead-plated Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the top entry type headers with suction cap. 19 PH CONNECTOR Taping specifications of SM3 type shrouded headers --------------------------- Feeding direction 380 2.0(14.961 .079)dia. Carrier tape Feeding direction Cover tape leader area Tail tape 40.0 (1.575)min. Connector loaded area 150.0 (5.906)min. Lead tape 20 vacancies min. [13.0(.512)dia.] W1 + 2.5 - 1.0 (W1 +.098 ) - .039 2.0 0.5 (.079 .020) Top entry type (2 to 6 circuits) Feeding direction 1.750.1 (.069.004) 1.550.05 (.061.002)dia. 4.00.1 (.157.004) Top entry type (7 to 14 circuits) Feeding direction 1.750.1 (.069.004) 1.550.05 (.061.002)dia. 4.00.1 (.157.004) 2.00.1 (.079.004) 0.380.05 (.015.002) Cover tape 2.00.1 (.079.004) 0.380.05 (.015.002) Cover tape F0.1 (.004) W0.3(.012) Carrier tape 12.00.1 (.472.004) 12.00.1 (.472.004) F0.1 (.004) S0.1(.004) W0.3(.012) Carrier tape Side entry type (2 to 6 circuits) Feeding direction 1.750.1 (.069.004) 1.550.05 (.061.002)dia. 4.00.1 (.157.004) Side entry type (7 to 14 circuits) Feeding direction 1.75 0.1 (.069 .004) 1.550.05 (.061.002)dia. 4.00.1 (.157.004) 2.00.1 (.079.004) 0.380.05 (.015.002) Cover tape 2.00.1 (.079.004) 0.380.05 (.015.002) Cover tape F0.1 (.004) W0.3(.012) Carrier tape 12.00.1 (.472.004) 12.00.1 (.472.004) F 0.1 (.004) S0.1(.004) W0.3(.012) Carrier tape Circuits 2 to 3 Taping dimensions mm(in.) F 7.5(.295) 11.5(.453) 14.2(.559) 20.2(.795) 7.5(.295) 11.5(.453) 14.2(.559) 20.2(.795) 4 to 6 7 to 9 Reel dimensions mm(in.) W1 17.5( .689) 25.5(1.004) 33.5(1.319) 45.5(1.791) 17.5( .689) 25.5(1.004) 33.5(1.319) 45.5(1.791) S - - 28.4(1.118) 40.4(1.591) - - 28.4(1.118) 40.4(1.591) W 16.0( .630) 24.0( .945) 32.0(1.260) 44.0(1.732) 16.0( .630) 24.0( .945) 32.0(1.260) 44.0(1.732) Q'ty / reel 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 Note: 1. Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. Top entry type 10 to 14 2 to 3 Side entry type 4 to 6 7 to 9 10 to 14 20 Material and Finish PH CONNECTOR SMT type PC board layout (viewed from component side) and Assembly layout --------- SM type Top entry type 5.0(.197) [2.0(.079) x (No.of circuits-1) + 2.7(.106)] 0.1(.004) 1.0 1.0 0.85 0.1 1.2 + 0 (.039)(.039)(.033) (.047 + .004)dia. 0 [2.0(.079) x (No.of circuits-1) + 2.7(.106)] 0.1(.004) 3.9 1.3 3.2 (.154)min.(.051)(.126)min. 2.5 3.0 4.4 (.173)min.(.098)(.118)min. 1.2 + 0.1 0 (.047 + .004)dia. 0 8.6(.339) 6.6(.260) 1.0 1.0 0.85 (.039)(.039)(.033) Side entry type 9.6(.378) 1.8(.071) 7.6(.299) 5.0(.197) SM3 type Top entry type 1.60.1 1.60.1 2.00.05 (.063.004) (.063.004) (.079.002) 3.00.1 1.0 (.118.004) (.039) End face of wafer on the mating side 2.0(.079) max. 7.5(.295)min. 5.0(.197) Side entry type 1.50.1 (.059.004) 3.40.1 (.134.004) 0.2 (.008) 1.60.1 2.00.05 (.063.004) (.079.002) End face of wafer on the mating side 5.5(.217)max. 9.0(.354)min. 8.6(.339) 6.6(.260) 9.6(.378) 1.0(.039) 7.6(.299) 5.5(.217) 1.0 (.039) min. 1.0 (.039) min. Note: 1. Tolerances are non-cumulative: 0.05mm(.002" ) for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 21 |
Price & Availability of B4B-PH-K-S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |