View 171-004-9P110-P1CLMH_383486.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

171-004, 171-005, 171-006, and 171-007
Single Row Board Mount MicroStrips
These .050" pitch single row PCB thru-hole microstrips are available in four typesvertical mount, right angle single row and two right angle staggered versions. Available with 1 to 30 contacts. PC tails are .020" diameter. Optional latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.
171-006-7P-.125-P1CL
How To Order Single Row Thru-Hole PCB MicroStrips
Series Number of Cavities Contact Type PC Tail Length (Inches) Optional Guide Pin Optional Latch Optional Mounting Holes
For No Mounting Holes Mounting Holes
Right Angle, Single Row PC Tails
171-004
Total Number of Cavities including guide pins,latches and mounting holes.
The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option.
-1 TO -30
Pin Contacts
P
Right Angle, Two Row PC Tails with .050" Between Rows
171-005
Socket Contacts
S
.080 .110 .125 .150 .172 .190 .250
Tail Length In Inches
For No Guide Pin Guide Pin in Cav. #1
Omit -P1
For No Latch
Omit CL
Omit MH
Center Latch
Guide Pin at Both Ends
-PB
Latch at Both Ends
BL
Right Angle, Two Row PC Tails with .100" Between Rows
171-006
Replace (X) with guide pin location. P3 shown below:
-P(X)
The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are crossdrilled to allow for attachment to a mounting surface.
Vertical Mount
171-007
Sample Part Number
171-006
(c) 2011 Glenair, Inc.
-7
P
-.125
U.S. CAGE Code 06324
-P1
CL
Printed in U.S.A.
www.glenair.com
GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-9
Micro-D Latching MicroStri ps
Series 171 MicroStrips Single Row Thru-Hole Board Mount Strips
Q
MWS MicroStrips Single Row Thru-Hole Board Mount Strips
171-004, 171-005, 171-006, and 171-007
PIN CONNECTOR
.075 (1.91) TYP .300 (7.62) 2Xo.062 (1.57) C .110 (2.79) MAX .125 (3.18) .135/.116 (3.43/2.95) .075 (1.91) MAX .062 (1.57) .200 (5.08) REF .075 (1.91) .050 (1.27) MAX
Micro-D Latching MicroStri ps
.075 (1.91) (A) B
SOCKET CONNECTOR
2Xo.062 (1.57) .050 (1.27) MAX .075 (1.91) TYP C .125 (3.18)
.075 (1.91)
(A) B
Dimensions
# of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) In.
.050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700
B Max. mm. In.
.085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785
C In.
N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600
mm.
2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94
mm.
N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24
1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78
# of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
(A) In.
.750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450
B Max. mm. In.
.835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535
C In.
.650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350
mm.
21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99
mm.
16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29
19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83
Center Latch Locations
Even Number of Cavities
PIN CONNECTOR SOCKET CONNECTOR
Odd Number of Cavities
PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
CAVITY 1
CAVITY 1
CAVITY 1
Q
Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) / 2.
Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) / 2.
(c) 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
www.glenair.com
GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-10
PCB layouts: 171-004 and 171-005
PRINTED CIRCUIT BOARD LAYOUTS
TYPE PIN CONNECTOR SOCKET CONNECTOR
171-004
PC TAIL LENGTH o.020 (0.51) .100 (2.54) o.020 (0.51) .100 (2.54) PC TAIL LENGTH
.400 (10.16)
.225 (5.72)
Right Angle Single Row .050" (1.27) Centers
.050 (1.27) TYP
POSITION 1
POSITION 1
.050 (1.27) TYP
171-005
PC TAIL LENGTH o.020 (0.51) .050 (1.27) .100 (2.54) o.020 (0.51) .050 (1.27) PC TAIL LENGTH .100 (2.54)
Right Angle Staggered .050" (1.27) Offset
(.400) PLUG
.225 (5.72)
POSITION 1 .100 (2.54) TYP .050 (1.27) TYP
POSITION 1
.100 (2.54) TYP .050 (1.27) TYP
(c) 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
www.glenair.com
GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-11
Micro-D Latching MicroStri ps
Series 171 MicroStrips Single Row Board Mount Strips
Q
Series 171 MicroStrips Single Row Board Mount Strips
PCB layouts: 171-006 and 171-007
PRINTED CIRCUIT BOARD LAYOUTS
TYPE PIN CONNECTOR SOCKET CONNECTOR
Micro-D Latching MicroStri ps
171-006
PC TAIL LENGTH o.020 (0.51) .100 (2.54) .100 (2.54)
o.020 (0.51) .100 (2.54) .100 (2.54) PC TAIL LENGTH
Right Angle Staggered .100" (2.54) Offset
.400 (10.16) .100 (2.54) TYP POSITION 1 .050 (1.27) TYP
POSITION 1
.225 (5.72)
.100 (2.54) TYP .050 (1.27) TYP
171-007
PC TAIL LENGTH
PC TAIL LENGTH .100 (2.54) .100 (2.54)
.120 (3.05)
o.020 (0.51) .100 (2.54)
5 7 4 6
o.020 (0.51)
.120 (3.05)
Vertical Mount .100" (2.54) Spacing
1
3 2
7 6
5 4
3 2
1
.100 (2.54)
.050 (1.27)
.100 (2.54)
.100 (2.54) .050 (1.27)
Q
(c) 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
www.glenair.com
GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-12

▲Up To Search▲

Price & Availability of 171-004-9P110-P1CLMH

	To Download 171-004-9P110-P1CLMH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .