|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HJF-A Series 0 /180 POWER DIVIDERS/COMBINERS 5 to 500 MHz / 4-Port Hybrid Junction / High Isolation / Low Insertion Loss / Hi-Rel Hermetic Pkg Functional Schematic, shown used as 0/180 Power Divider PRINCIPAL SPECIFICATIONS Model Number HJF-A-200 Frequency Range, MHz 5 - 400 Performance Bandwidth, MHz 5 - 10 10 - 200 200 - 400 100 - 500 Isolation, E - H Ports, dB, Min 30 30 30 25 Insertion Loss, dB, Max. 1.5 1.0 1.5 1.5 Amplitude Phase Balance, Balance, dB, Max. Max. 0.4 0.3 0.4 0.4 3 3 3 4 VSWR, Max. 1.5:1 1.3:1 1.5:1 1.4:1 HJF-A-300 100 - 500 A-Size Flatpack Outline GENERAL SPECIFICATIONS Impedance: Coupling: CW Input: Weight: Operating Temperature: 50 nom. -- 3 dB nom. 1 Watt max. 0.1 oz (2.8 g)nom. -- 55 to +85C Input/Output Relationships E Isol. In H In Isol. 1 0 ref. 0 ref. 2 0 -- 180 NOTES: 1. Tolerance on 3 place decimals .010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. All unmarked pins are case ground. 4. Dimensions marked with * apply only at body. Typical HJF-A-200 Performance General Notes: 1. The HJF-A series of four port hybrid junctions uses lumped element circuits to provide a variety of signal processing functions. Among these are: a) Power division with phase shift: Signals applied to the delta () port, or E-arm, will divide equally between output ports 1 and 2 (co-linear arms) and be 180 out of phase. b) Power division with no phase shift: Signals applied to the sum () port, or H-arm, will divide equally between output ports 1 and 2 (co-linear arms) and be in phase. c) Vector addition: Simultaneous application of signals to both E and H arms results in their vector addition to one co-linear port and vector subtraction at the other. Correction for the phase difference between E and H paths to the co-linear ports must be made . This phase equalization may be applied externally or factory installed within the unit at additional cost. 2. All units comply with MIL-P-23971 and can be supplied screened for compliance with additional specifications for military and aerospace applications requiring the highest reliability. 22Feb96 For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531 |
Price & Availability of HJF-A-300 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |