|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Full Color Top View LEDs 67-23SDRSYGUBC/TR8 Features P-LCC-4 package. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Low (2mA) current operation. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 67-23 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Type SDR SYG UB Material AlGaInP AlGaInP InGaN/SiC Emitted Color Deep-Red Brilliant Yellow Green Blue Lens Color Water Clear Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 1 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Package Dimensions C L 1 C L 3 0.70.1 2.20.1 2.80.2 4 - Red - Green - Blue 2 4 + 2 3 1 3.20.2 3.50.2 0.15 0.05 0.710.1 0.8 0.1 1.80.2 0.50.1 2.40.1 2.80.2 2.70.2 For reflow soldering (propose) 0.80.1 1.80.1 1.60.1 1.80.1 Note: The tolerances unless mentioned is 0.1mm ;Unit = mm. Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 2.20.1 0.70.1 Rev. 1 Page: 2 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Symbol VR SDR Rating 5 25 25 30 -40 ~ +85 -40~ +100 Unit V Forward Current IF SYG UB mA Operating Temperature Storage Temperature Topr Tstg SDR 2000 2000 1000 60 60 130 60 60 100 mA mW V Electrostatic Discharge(HBM) ESD SYG UB SDR Power Dissipation Pd SYG UB SDR Peak Forward Current (Duty 1/10 @ 1KHZ) IFP SYG UB Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 3 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Electro-Optical Characteristics (Ta=25) Parameter Symbol SDR Luminous Intensity IV SYG UB SDR Peak Wavelength p SYG UB SDR Dominant Wavelength d SYG UB SDR Spectrum Radiation Bandwidth SYG UB SDR Forward Voltage VF SYG UB Viewing Angle Reverse Current 21/2 IR Min. 63 13 11 --------------------------------------------------------Typ. 112 20 18 650 575 468 639 573 470 20 20 26 2.0 2.0 3.5 120 ----Max. ------------------------------------------------2.4 2.4 4.0 ----10 deg A IF=20mA VR=5V V IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA mcd IF=20mA Unit Condition Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 4 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 5 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension 0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 6 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension 0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 7 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 8 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-673-036 http://www.everlight.com Prepared date: 18-Aug-2005 Rev. 1 Page: 9 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-23SDRSYGUBC/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-673-036 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Rev. 1 Page: 10 of 10 http://www.everlight.com Prepared date: 18-Aug-2005 Prepared by: Venis Wu |
Price & Availability of 67-23SDRSYGUBC-TR8 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |