 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TIP122FP TIP127FP Complementary power Darlington transistors Features Low collector-emitter saturation voltage Complementary NPN - PNP transistors TO-220FP isolated package UL compliant Application 3 1 2 General purpose linear and switching TO-220FP Description The devices are manufactured in planar technology with "base island" layout and monolithic Darlington configuration. The resulting transistors show exceptional high gain performance coupled with very low saturation voltage. Figure 1. Internal schematic diagrams NPN: R1 = 7 k R2 = 70 PNP: R1 = 16 k R2 = 60 Table 1. Device summary Marking TIP122FP TIP127FP Polarity NPN TO-220FP Tube PNP Package Packaging Order codes TIP122FP TIP127FP December 2009 Doc ID 5309 Rev 5 1/11 www.st.com 11 Electrical ratings TIP122FP, TIP127FP 1 Electrical ratings Table 2. Symbol VCBO VCEO VEBO IC ICM IB PTOT TSTG TJ Absolute maximum ratings Parameter Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current Base current Total dissipation at Tc 25 C Tamb 25 C Storage temperature Max. operating junction temperature Value 100 100 5 5 8 0.12 30 2 -65 to 150 C 150 Unit V V V A A A W Note: For PNP types voltage and current values are negative. Table 3. Symbol RthJC RthJA Thermal data Parameter Thermal resistance junction-case max. Thermal resistance junction-ambient max. Value 4.2 C/W 62.5 Unit 2/11 Doc ID 5309 Rev 5 TIP122FP, TIP127FP Electrical characteristics 2 Electrical characteristics Tcase = 25 C unless otherwise specified. Table 4. Symbol ICEO ICBO IEBO Electrical characteristics Parameter Collector cut-off current (IB = 0) Collector cut-off current (IB = 0) Emitter cut-off current (IC = 0) Collector-emitter sustaining voltage (IB = 0) Collector-emitter saturation voltage Base-emitter on voltage DC current gain Test conditions VCE = 50 V VCE = 100 V VEB = 5 V Min. Typ. Max. 0.5 0.2 2 Unit mA mA mA VCEO(sus)(1) IC = 30 mA IC = 3 A IC = 5 A IC = 3 A IC = 0.5 A IC = 3 A IB = 12 mA IB = 20 mA VCE = 3 V 100 2 4 2.5 V V V V VCE(sat)(1) VBE(on)(1) hFE(1) VCE = 3 V 1000 VCE = 3 V 1000 1. Pulse test: pulse duration 300 s, duty cycle 2 %. Note: For PNP types voltage and current values are negative. Doc ID 5309 Rev 5 3/11 Electrical characteristics TIP122FP, TIP127FP 2.1 Figure 2. Electrical characteristics (curves) Safe operating area Figure 3. Derating curve Figure 4. hFE DC current gain for NPN type AM00696v1 Figure 5. hFE DC current gain for PNP type AM00697v1 1000 Tj= -40 C Tj= 25 C Tj=125 C 100 VCE= 3 V 1000 Tj= -40 C Tj= 25 C Tj=125 C VCE= -3 V 100 10 0.01 0.1 1 Ic(A) 10 -0.01 -0.1 -1 Ic(A) Figure 6. Collector-emitter saturation voltage Figure 7. for NPN type AM00698v1 Collector-emitter saturation voltage for PNP type AM00699v1 VCE(sat) (V) hFE= 250 1.4 VCE(sat) (V) hFE= 250 -1.4 1 -1 0.6 Tj= -40 C Tj= 25 C Tj=125 C 1 Ic(A) -0.6 Tj= -40 C Tj= 25 C Tj=125 C -1 Ic(A) 0.2 0.1 -0.2 -0.1 4/11 Doc ID 5309 Rev 5 TIP122FP, TIP127FP Figure 8. Base-emitter saturation voltage for Figure 9. NPN type AM00700v1 Electrical characteristics Base-emitter saturation voltage for PNP type AM03261v1 VBE(sat) (V) hFE= 250 2.0 VBE(sat) (V) hFE= 250 -2.0 1.5 -1.5 1.0 Tj= -40 C Tj= 25 C Tj=125 C 1 Ic(A) -1.0 Tj= -40 C Tj= 25 C Tj=125 C -1 Ic(A) 0.5 0.1 -0.5 -0.1 Figure 10. Base-emitter on voltage for NPN type AM03262v1 Figure 11. Base-emitter on voltage for PNP type AM03263v1 VBE(on) (V) VCE= 3 V 2.0 VBE(on) (V) -2.0 VCE= -3 V 1.5 -1.5 1.0 Tj= -40 C Tj= 25 C Tj=125 C 1 Ic(A) -1.0 Tj= -40 C Tj= 25 C Tj=125 C -1 Ic(A) 0.5 0.1 -0.5 - 0.1 Figure 12. Switching time on resistive load for Figure 13. Switching time on resistive load for NPN type (on) PNP type (on) AM03264v1 AM03265v1 t(ns) Vcc= 30 V hFE=250 Vbeoff= - 5 V Ibon= - Iboff t(ns) Vcc= -30 V hFE=250 Vbeoff= 5 V -Ibon= Iboff 100 100 Delay time Rise time Delay time Rise time 10 0 1 2 3 4 5 Ic(A) 10 0 -1 -2 -3 -4 -5 Ic(A) Doc ID 5309 Rev 5 5/11 Electrical characteristics TIP122FP, TIP127FP Figure 14. Switching time on resistive load for Figure 15. Switching time on resistive load for NPN type (off) PNP type (off) AM03266v1 AM03267v1 t(ns) t(ns) Vcc= -30 V hFE=250 Vbeoff= 5 V -Ibon= Iboff Vcc= 30 V hFE=250 Vbeoff= - 5 V Ibon= - Iboff Storage time Fall time 1000 1000 Storage time Fall time 100 0 1 2 3 4 5 Ic(A) 100 0 -1 -2 -3 -4 -5 Ic(A) Figure 16. Capacitances for NPN type AM03269v1 Figure 17. Capacitances for PNP type AM03268v1 C(pF) F= 0.1 MHz C(pF) F= 0.1 MHz CCB 100 CEB 100 CEB CCB 10 0.01 0.1 1 10 VR(V) 10 0.01 0.1 1 10 VR(V) 6/11 Doc ID 5309 Rev 5 TIP122FP, TIP127FP Test circuits 3 Test circuits Figure 18. Resistive load switching for NPN type 1. Fast electronic switch 2. Non-inductive resistor Figure 19. Resistive load switching for PNP type 1. Fast electronic switch 2. Non-inductive resistor Doc ID 5309 Rev 5 7/11 Package mechanical data TIP122FP, TIP127FP 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 8/11 Doc ID 5309 Rev 5 TIP122FP, TIP127FP Table 5. Dim. Min. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.8 2.9 15.9 9 3 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 Typ. Package mechanical data TO-220FP mechanical data mm Max. 4.6 2.7 2.75 0.7 1 1.70 1.70 5.2 2.7 10.4 30.6 10.6 3.6 16.4 9.3 3.2 Figure 20. TO-220FP drawing L7 E A B D Dia L6 L5 F1 F2 F H G1 G L2 L3 L4 7012510_Rev_K Doc ID 5309 Rev 5 9/11 Revision history TIP122FP, TIP127FP 5 Revision history Table 6. Date 21-Jun-2004 02-Dec-2009 Document revision history Revision 4 5 Changes Document migration, no content change Updated Section 2.1: Electrical characteristics (curves) and TO220FP package mechanical data 10/11 Doc ID 5309 Rev 5 TIP122FP, TIP127FP Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 5309 Rev 5 11/11 |
Price & Availability of TIP127FP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |