|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oscilent Corporation IF SAW Filter | 811-SL200.0M-05 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 811-SL200.0M-05 . TYPE : 11.6 x 5.0 SMD Base Station & Repeater Apr 18, 2007 200.0 MHz Bandpass SAW Filter Low Loss PART NUMBER : 811-SL200.0M-05 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -40.0 dB Relative Attenuation: (Ref 200MHz) At 170 / 230 MHz Ultimate Rejection Amplitude Ripple (Fo +/- 2.05MHz) Group Delay Variation (Fo +/- 2.05MHz) Absolute Delay at Fo Temperature Coefficient In/Out Return Loss at Fo Minimum 4.5 5.5 50 45 Typical 200.0 11.8 50 50 5.09 5.92 8.68 57 0.6 100 0.98 -23 Maximum 13.0 10.0 1.0 150 Units MHz dB ohm ohm MHz MHz MHz dB dB dBp-p nsec sec ppm/C dB *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE PIN Description IN-1,OUT-7, GROUND-2,3,4,5,6,8,9,10 Oscilent Corporation IF SAW Filter | 811-SL200.0M-05 Page 2 of 2 FREQUENCY RESPONSE Part No.: 811-SL200.0M-05 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 811-SL2000M-05 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |