View DMN2009LSS-13_4997935.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DMN2009LSS
SINGLE N-CHANNEL ENHANCEMENT MODE MOSFET
Features
* Low On-Resistance * 8m @ VGS = 10V * 9m @ VGS = 4.5V * 12m @ VGS = 2.5V Low Gate Threshold Voltage Low Input Capacitance Fast Switching Speed Low Input/Output Leakage Lead Free By Design/RoHS Compliant (Note 2) "Green" Device (Note 4) Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
* * * * * * * * Case: SO-8 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals Connections: See Diagram Terminals: Finish - Matte Tin annealed over Copper lead frame. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 4 Ordering Information: See Page 4 Weight: 0.072 grams (approximate)
* * * * * * *
SO-8
S S S G
D D D D
TOP VIEW
TOP VIEW Internal Schematic
Maximum Ratings
Drain-Source Voltage Gate-Source Voltage Drain Current (Note 1) Pulsed Drain Current (Note 3)
@TA = 25C unless otherwise specified Characteristic Symbol VDSS VGSS Steady State TA = 25C TA = 70C ID IDM Value 20 12 12 9.6 42 Units V V A A
Thermal Characteristics
Characteristic Total Power Dissipation (Note 1) Thermal Resistance, Junction to Ambient Operating and Storage Temperature Range
Notes:
Symbol PD RJA TJ, TSTG
Value 2 62.5 -55 to +150
Unit W C/W C
1. Device mounted on 2 oz, FR-4 PCB, with RJA = 62.5C/W 2. No purposefully added lead. 3. Pulse width 10S, Duty Cycle 1%. 4. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
DMN2009LSS
Document number: DS31409 Rev. 6- 2
1 of 5 www.diodes.com
June 2010
(c) Diodes Incorporated
DMN2009LSS
Electrical Characteristics
Characteristic OFF CHARACTERISTICS (Note 5) Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-Source Leakage ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Static Drain-Source On-Resistance Forward Transconductance Diode Forward Voltage (Note 5) DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate Resistance SWITCHING CHARACTERISTICS Total Gate Charge Gate-Source Charge Gate-Drain Charge
Notes: 5.
@TA = 25C unless otherwise specified Symbol BVDSS IDSS IGSS VGS(th) RDS (ON) gfs VSD Ciss Coss Crss RG Qg Qgs Qgd Min 20 0.5 0.5 Typ

Max 1 100 1.2 8 9 12 1.2
Unit V A nA V m S V pF pF pF
Test Condition VGS = 0V, ID = 250A VDS = 20V, VGS = 0V VGS = 12V, VDS = 0V VDS = VGS, ID = 250A VGS = 10V, ID = 12A VGS = 4.5V, ID = 10A VGS = 2.5V, ID = 8A VDS = 5V, ID = 6.5A VGS = 0V, IS = 3A
27 0.7 2555 523 496 1.1
28.9 58.3
VDS = 10V, VGS = 0V, f = 1.0MHz VGS = 0V VDS = 0V, f = 1MHz VDS = 10V, VGS = 4.5V, ID = 12A VDS = 10V, VGS = 10V, ID = 12A VDS = 10V, VGS = 10V, ID = 12A VDS = 10V, VGS = 10V, ID = 12A
3.7 11.4
nC
Short duration pulse test used to minimize self-heating effect.
30
VGS = 10V
30
25 ID, DRAIN CURRENT (A)
VGS = 4.5V VGS = 4.0V
VDS = 5V
25 ID, DRAIN CURRENT (A)
VDS = 10V
20
VGS = 3.0V VGS = 2.5V
20
15
15
10
VGS = 1.5V
10
TA = 150C TA = 125C
5
5
TA = 85C T A = 25C TA = -55C
0
0
2 3 4 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 1 Typical Output Characteristics
1
5
0 0.4 0.6 0.8 1 1.2 1.4 VGS, GATE SOURCE VOLTAGE (V) Fig. 2 Typical Transfer Characteristics 1.6
DMN2009LSS
Document number: DS31409 Rev. 6- 2
2 of 5 www.diodes.com
June 2010
(c) Diodes Incorporated
DMN2009LSS
RDS(ON), DRAIN-TO-SOURCE RESISTANCE ()
0.015
1.4 1.3
VGS = 2.5V ID = 8A VGS = 4.5V ID = 10A
RDS(ON), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED)
0.01
1.2
VGS = 4.5V ID = 10A VGS = 10V ID = 12A
1.1
VGS = 10V ID = 12A
VGS = 2.5V ID = 8A
0.005
1.0
0.9 0 -50 0.8 -50
-25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 3 On-Resistance Variation with Temperature
-25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 4 On-Resistance Variation with Temperature
10,000
1.0 VGS(TH), GATE THRESHOLD VOLTAGE (V)
0.8
ID = 250A
C, CAPACITANCE (pF)
Ciss
0.6
1,000
Coss Crss
0.4
0.2
100 0 8 12 16 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 5 Typical Capacitance 4 20
-25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 6 Gate Threshold Variation vs. Ambient Temperature
0 -50
100
10 IS, SOURCE CURRENT (A)
1
T A = 150C TA = 125C
0.1
T A = 85C
0.01
TA = 25C TA = -55C
0.001
0.0001 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 VSD, SOURCE-DRAIN VOLTAGE (V) Fig. 7 Diode Forward Voltage vs. Current
1
DMN2009LSS
Document number: DS31409 Rev. 6- 2
3 of 5 www.diodes.com
June 2010
(c) Diodes Incorporated
DMN2009LSS
1 r(t), TRANSIENT THERMAL RESISTANCE
D = 0.7 D = 0.5 D = 0.3
0.1
D = 0.1 D = 0.05 D = 0.9 RJA(t) = r(t) * RJA RJA = 99C/W P(pk)
D = 0.02
0.01
D = 0.01 D = 0.005
t1
D = Single Pulse
t2 TJ - TA = P * RJA(t) Duty Cycle, D = t 1/t2
0.001 0.0001
0.001
0.01
0.1 1 t1, PULSE DURATION TIME (s) Fig. 8 Transient Thermal Response
10
100
1,000
Ordering Information
Part Number DMN2009LSS-13
Notes:
(Note 6) Case SO-8 Packaging 2500/Tape & Reel
6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
Top View
8 5
Logo
N2009LS YY WW
Part no.
1
4
Xth week: 01~53 Year : "07" =2007 "08" =2008
Package Outline Dimensions
SO-8 Dim Min Max A 1.75 A1 0.10 0.20 A2 1.30 1.50 A3 0.15 0.25 b 0.3 0.5 D 4.85 4.95 E 5.90 6.10 E1 3.85 3.95 e 1.27 Typ h 0.35 L 0.62 0.82 0 8 All Dimensions in mm
E1 E A1 L
0.254
Gauge Plane Seating Plane
Detail `A'
h 45 A2 A A3 e D b 7~9
Detail `A'
DMN2009LSS
Document number: DS31409 Rev. 6- 2
4 of 5 www.diodes.com
June 2010
(c) Diodes Incorporated
DMN2009LSS
Suggested Pad Layout
X
C1 C2 Y
Dimensions X Y C1 C2
Value (in mm) 0.60 1.55 5.4 1.27
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com
DMN2009LSS
Document number: DS31409 Rev. 6- 2
5 of 5 www.diodes.com
June 2010
(c) Diodes Incorporated

▲Up To Search▲

Price & Availability of DMN2009LSS-13

	To Download DMN2009LSS-13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .