View KD2006-DC72A_4982755.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Thick film thermal printhead (with thermal historical control)
KD2006-DC72A
DC72 series has our own internally developed heat-history control function. This product is best suited for applications which require 24 hours operation like factory production lines. Applications High speed label printer High speed bar code printer High speed ticket printer Various high speed terminal printers Features 1) Newly developed thick-film fast response thermal element and driver LSI with the function of thermal history control which is added the future history control are employed for this series. It is possible to print with super high speed of 10 inches / s or 250 mm / s. 2) 150km life realized by attributing durable new protection film. 3) New partial glaze construction makes it compatible with the thermal transfer application. Dimensions (Unit : mm)
LABEL
10.10.4 182 (7) Dot #1344 168 (Effective Print Width) Dot #1 (9)
(3.5)
Max.40
Max.48
M ax
Max.5 #2 #34 #10 #1 Max.14.0 #1 CONNECTOR A 3H10 (Effective Depth 3) #33 CONNECTOR B 3H10 Length 4(Effective Depth 3)
17.80.2
13.30.3
7.30.3
400.3 440.2 (Heat Element) 440.3 800.3 1240.3 3-M3(Effective Depth 3)
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
. 20
1/3
2009.11 - Rev.A
KD2006-DC72A
Inner circuit
VH 100Fx2 35V GND 0.1F 50V VDD N.C. / STB4 / STB3 / STB2 / STB1
#1344
Data Sheet
DOT #1344
DOT #1
#961
#960
#705
#704
#321
#320
#1
/ RESET
LATCH REGISTER
CLKIN4 DI4 DO4 CLKOUT4 CLKIN3 DI3 DO3 CLKOUT3 CLKIN2 DI2 DO2 CLKOUT2 CLKIN1 DI1 DO1 / LOAD START INC SEL2 SEL1 TM TM CONNECTOR
SHIFT REGISTER
SHIFT REGISTER
SHIFT REGISTER
SHIFT REGISTER
To Each IC
THERMISTOR 30k B : 3950K
DI No. DI4 DI3 DI2 DI1
DOT No. 1344 to 961 960 to 705 704 to 321 320 to 1
/ STB No. / STB4 / STB3 / STB2 / STB1
DOT No. 1344 to 961 960 to 705 704 to 321 320 to
Fig.1
CLK No. CLKIN4 CLKIN3 CLKIN2 CLKIN1
DOT No. 1344 to 961 960 to 705 704 to 321 320 to 1
1
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
2/3
2009.11 - Rev.A
KD2006-DC72A
Pin assignments
CONNECTOR A No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Circuit VDD VDD NC NC SEL2 SEL1 CLKIN4 (CP) CLKOUT4 CLKIN3 CLKOUT3 DI4 DO4 DI3 DO3 / STB4 / STB3 INC No. 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Circuit / LOAD / RESET START TM TM DI2 DO2 DI1 DO1 / STB2 / STB1 CLKIN2 CLKOUT2 CLKIN1 NC NC NC CONNECTOR B No. 1 2 3 4 5 6 7 8 9 10 Circuit VH (COM) VH (COM) VH (COM) VH (COM) VH (COM) GND GND GND GND GND
Data Sheet
Characteristics
Parameter Effective printing width Dot pitch Total dot number Average resistance value Applied voltage Applied power Print cycle Maximum number of dots energized simultaneously Maximum clock frequency Maximum roller diameter Running life / pulse life Operating temperature Symbol - - - Rave VH PO SLT - - - - - Typical 168 0.125 1344 650 24 0.75 0.49 1344 8 20.0 150/(1x10 ) 5 to 45
8
Unit mm mm dots V W/dot ms dots MHz mm km/pulses C
Data sheets
1.6 1.4
SLT : 0.82ms/line
1.0 0.9
Level1 Level2
MAXIMUM ENERGY (mJ/dot)
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 0.2 0.4
OPTICAL DENSITY
1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
Level3
Level4 Level5 Level6
0.6
0.8
1.0
1.2
1.4
ENERGY (mJ/dot)
SCANNING LINE TIME (ms/line)
Fig.2 Representative density curve
Fig.3 Maximum energy curve
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
3/3
2009.11 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved.
R0039A

▲Up To Search▲

Price & Availability of KD2006-DC72A

	To Download KD2006-DC72A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .