 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| UltraThin Ceramic Capacitors UT Series The Ultrathin (UT) series of ceramic capacitors is a new product offering from AVX. The UT series was designed to meet the stringent thickness requirements of our customers. AVX developed a new termination process (FCT - Fine Copper Termination) that provides unbeatable flatness and repeatability. The series includes products < 0.35mm in height and is targeted for applications such as Smart cards, Memory modules, High Density SIM cards, Mobile phones, MP3 players, and embedded solutions. HOW TO ORDER UT 02 3 D 103 M A T 2 D Style Ultra Thin Case Size 0402 Rated Voltage 6 = 6.3V Z = 10V Y = 16V 3 = 25V Temperature Characteristic X5R Coded Cap (in pF) 2 Significant Digits + Number of Zeros Cap Tolerance 20% Termination Style Commercial Termination T = 100% Sn C = Cu Packaging 2 = 7" Reel 15,000 pcs 4 = 13" Reel 50,000 pcs Thickness D = 0.30mm max E = 0.25mm max F = 0.15mm max (only availabe in Cu Termination) RECOMMENDED SOLDER PAD DIMENSIONS (Sn Termination) L BL W BL End View T Side View L Top View 0.50 (0.020) mm (inches) 0.50 (0.020) 0.60 (0.024) TYPICAL Cu THICKNESS M mil TT 10.0 4.00 0.40 0.16 TT 1.70 (0.067) PART DIMENSIONS Thickness D E F L 1.00 0.10 (0.0390.004) 1.00 0.10 (0.0390.004) 1.00 0.10 (0.0390.004) W 0.50 0.10 (0.020 0.004) 0.50 0.10 (0.020 0.004) 0.50 0.10 (0.020 0.004) T 0.25 0.05 (0.010 0.002) 0.20 0.05 (0.008 0.002) 0.125 0.025 (0.005 0.001) inches (mm) BL 0.27 0.05 (0.0108 0.002) 0.27 0.05 (0.0108 0.002) 0.27 0.05 (0.0108 0.002) CAP RANGE (THICKNESS CODE) Cap Code 103 223 6.3V F D 10V E D 16V E 25V D 1 UltraThin Ceramic Capacitors UT Series Specifications and Test Methods - Cu Termination Parameter/Test Operating Temperature Range Capacitance Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Specification Limits -55C to +85C Within specified tolerance 3.0% for 25V DC rating 12.5% for 16V DC rating 100 M - F No breakdown or visual defects No defects 12% Meets Initial Values (As Above) Initial Value x 0.3 No visual defects 20% Initial Value x 2.0 (As Above) Initial Value x 0.3 (As Above) Meets Initial Values (As Above) Charge device with 1.5X rated voltage in test chamber set at 85C 2C for 1000 hours (+48, -0) Remove from test chamber and stabilize at room temperature for 24 2 hours before measuring. 90 mm Measuring Conditions Temperature Cycle Chamber Freq.: 1.0 kHz 10% Voltage: 1.0Vrms .2V Charge device with rated voltage for 120 5 secs @ room temp/humidity Charge device with 300% of rated voltage for 1-5 seconds, with charge and discharge current limited to 50 mA (max) Deflection: 2mm Test Time: 30 seconds 1mm/sec Resistance to Flexure Stresses Load Life 2 UltraThin Ceramic Capacitors UT Series Specifications and Test Methods - Sn Termination Parameter/Test Operating Temperature Range Capacitance Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Specification Limits -55C to +85C Within specified tolerance 3.0% for 25V DC rating 12.5% for 16V DC rating 100 M - F No breakdown or visual defects No defects 12% Meets Initial Values (As Above) Initial Value x 0.3 95% of each terminal should be covered with fresh solder No defects, <25% leaching of either end terminal 7.5% Meets Initial Values (As Above) Meets Initial Values (As Above) Meets Initial Values (As Above) No visual defects 12% Initial Value x 2.0 (As Above) Initial Value x 0.3 (As Above) Meets Initial Values (As Above) No visual defects 12% Initial Value x 2.0 (As Above) Initial Value x 0.3 (As Above) Meets Initial Values (As Above) Remove from chamber and stabilize at room temperature and humidity for 24 2 hours before measuring. Charge device with 1.5X rated voltage in test chamber set at 85C 2C for 1000 hours (+48, -0) Remove from test chamber and stabilize at room temperature for 24 2 hours before measuring. Store in a test chamber set at 85C 2C/ 85% 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Dip device in eutectic solder at 260C for 60 seconds. Store at room temperature for 24 2 hours before measuring electrical properties. 90 mm Measuring Conditions Temperature Cycle Chamber Freq.: 1.0 kHz 10% Voltage: 1.0Vrms 0.2V Charge device with rated voltage for 120 5 secs @ room temp/humidity Charge device with 300% of rated voltage for 1-5 seconds, with charge and discharge current limited to 50 mA (max) Deflection: 2mm Test Time: 30 seconds 1mm/sec Resistance to Flexure Stresses Solderability Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Dip device in eutectic solder at 245 5C for 5.0 0.5 seconds Resistance to Solder Heat Load Life Load Humidity 3 |
Price & Availability of UT02ZD103MAC2D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |