Part Number Hot Search : 
39000 4ALVC1 M5M510 EM2420EK FAN6204A CC900 MC74HC K2700
Product Description
Full Text Search
 

To Download DI-8B45 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 DI-8B45 Frequency Input Modules
FEATURES
* Accepts Frequency Input Signals 0 to 100kHz * TTL or Zero-Crossing Signal Inputs * High Level Voltage Outputs * 1500Vrms Transformer Isolation * ANSI/IEEE C37.90.1 Transient Protection * Input Protected up to 240VAC Continuous * 100dB CMR * 70dB NMR at 60Hz * 0.10% Accuracy * 0.05% Linearity * Low Drift with Ambient Temperature * UL, CSA, FM and CE Certifications Pending * Mix and Match Module Types
SPECIFICATIONS
Input Range Input Threshold
Typical at TA = +25C and +5V Power
DI-8B45
0Hz to 100kHz Zero Crossing 200mVp-p 350Vp-p TTL, 170Vp-p Zero Crossing 4s 0.8V max 2.4V min 50mV 1.5V 200k 200k 200k 240Vrms max ANSI/IEEE C37.90.1 +5V at 8mA max 1500Vrms max ANSI/IEEE C37.90.1 100dB 0.10% Span 0.05% Span 25ppm/C 100ppm/C <10mVp-p at Input >2% Span 300ms (-01); 175ms (-02); 50ms (-03); 30ms (-04); 30ms (-05); 15ms (-06); 15ms (-07); 2ms (-08) 0 to +5V Continuous Short to Ground ANSI/IEEE C37.90.1 +5VDC 5% 110mA 50ppm/% 1.11" x 1.65" x 0.40" (28.1mm x 41.9mm x 10.2mm)
DESCRIPTION
DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B45 module isolates and conditions a frequency input signal and provides an analog voltage output. The frequency input signal can be either a TTL level or zero crossing with as little as 100mV amplitude. Input circuitry for each signal type has built-in hysteresis to prevent spurious noise from corrupting the module output. TTL signals are applied to the + and - terminals while zero crossing signals are applied to the +EXC and - terminals. Reference the block diagram (p 2). A 5V excitation is available for use with magnetic pick-up or contact closure type sensors. The excitation is available on the EXC terminal with return on the - terminal. A special input circuit on the DI-8B45 modules provides protection against accidental connection of power-line voltages up to 240VAC. Clamp circuits on the I/O and power terminals protect against harmful transients. Isolation is provided by optical coupling to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, 5%. The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.
Minimum Input Maximum Input Minimum Pulse Width TTL Input Low TTL Input High Input Hysteresis Zero Crossing TTL Input Resistance Normal Power Off Overload Input Protection Continuous Transient Excitation CMV, Input to Output Continuous Transient CMR (50Hz or 60Hz) Accuracy Nonlinearity Stability Offset Gain Noise Output Ripple Response Time, 90% Span Output Range Output Protection Power Supply Voltage Power Supply Current Power Supply Sensitivity Mechanical Dimensions Environmental
Transient
Operating Temperature -40C to +85C Storage Temperature -40C to +85C Relative Humidity 0 to 95% Noncondensing 240VAC between + and -/+EXC/-EXC terminals. 120VAC between - and +EXC/EXC terminals and between +EXC and -EXC terminals. Includes nonlinearity, hysteresis, and repeatability.
DATAQ Instruments, Inc. * 241 Springside Drive * Akron, Ohio 44333 * Tel: 330-668-1444 * Email: support@dataq.com * www.dataq.com
DI-8B45 Frequency Input Modules
Block Diagram
Ordering Information
Model Number DI-8B45-01 DI-8B45-02 DI-8B45-03 DI-8B45-04 DI-8B45-05 DI-8B45-06 DI-8B45-07 DI-8B45-08 Input Range 0Hz to 500Hz 0Hz to 1kHz 0Hz to 2.5kHz 0Hz to 5kHz 0Hz to 10kHz 0Hz to 25kHz 0Hz to 50kHz 0Hz to 100kHz
241 Springside Drive Akron, Ohio 44333 330-668-1444
Data Acquisition Product Links
(click on text to jump to page)
Data Acquisition | Data Logger | Chart Recorder | Thermocouple | Oscilloscope
The information on this data sheet is subject to change without notice. DATAQ and the DATAQ logo are registered trademarks of DATAQ Instruments, Inc. All rights reserved. Copyright (c) 2005 DATAQ Instruments, Inc.


▲Up To Search▲   

 
Price & Availability of DI-8B45

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X