|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
UNISONIC TECHNOLOGIES CO., LTD R200LD10 VOLTAGE REGULATOR DESCRIPTION The UTC R200LD10 shows a high current, high accuracy, low-dropout voltage. The features are: low dropout voltage, very low ground current. Cause the series have been designed for high current loads, so they are also used in lower current, extremely low dropout-critical systems (in which their tiny dropout voltage and ground current values are important attributes). LINEAR INTEGRATED CIRCUIT FEATURES * Built-in ON/OFF function, * Over current protection function, * ASO protection function * Overheat protection function * 0.3A / 3.3V(R1=2K) Output low dropout voltage regulator Lead-free: R200LD10L Halogen-free: R200LD10G ORDERING INFORMATION Normal R200LD10-TN4-R R200LD10-TN4-T R200LD10-TN5-R R200LD10-TN5-T Ordering Number Lead Free R200LD10L-TN4-R R200LD10L-TN4-T R200LD10L-TN5-R R200LD10L-TN5-T Halogen Free R200LD10G-TN4-R R200LD10G-TN4-T R200LD10G-TN5-R R200LD10G-TN5-T Package TO-252-4 TO-252-4 TO-252-5 TO-252-5 Packing Tape Reel Tube Tape Reel Tube www.unisonic.com.tw Copyright (c) 2008 Unisonic Technologies Co., Ltd 1 of 9 QW-R101-022.D R200LD10 PIN DESCRIPTIONS PIN NO. 1 2 3 4 5 PIN NAME VIN VC VOUT VADJ GND DC Input Voltage. On/Off Control DC Output Voltage. Output Voltage Adjustment Ground LINEAR INTEGRATED CIRCUIT PIN FUNCTION UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 9 QW-R101-022.D R200LD10 BLOCK DIAGRAM LINEAR INTEGRATED CIRCUIT VIN VC 1 2 3 VOUT STARTING CIRCUIT REFERENCE VOLTAGE OTP OVERCURRENT PROTECTION SOA PROTE CTION 4 5 GND VADJ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 9 QW-R101-022.D R200LD10 ABSOLUTE MAXIMUM RATINGS (Ta=25C) LINEAR INTEGRATED CIRCUIT PARAMETER SYMBOL RATINGS UNITS Input Voltage (Note 2) VIN 24 V ON/OFF Control Terminal Voltage (Note 2) VC 24 V Output Adjustment Pin Voltage (Note 2) VADJ 5 V Output Current IOUT 1 A Power Dissipation (with infinite heat sink) PD 8 W Junction Temperature TJ +150 C Operating Temperature TOPR -40 ~ +85 C Storage Temperature TSTG -40 ~ +150 C Note: 1.Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2.All are open except GND and applicable terminals. ELECTRICAL CHARACTERISTICS (VI N=5V, VOUT=3.3 V(R1=2k), IOUT=0.3A, VC=2.7V, TJ=25C, CI=0.33F, CO=10F, unless otherwise specified) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Input Voltage VIN 3.5 24 V Output Voltage VOUT 3.0 20 V Load Regulation VOUT/IOUT IOUT = 5mA~ 1A 1.0 % Line Regulation VOUT/VIN VIN = 4~ 10V, IOUT=5mA 1.0 Ripple Rejection RR Refer to Fig 3 60 dB Dropout Voltage VD VIN=3.5V 0.5 V Reference Voltage VREF 2.583 2.65 2.717 Temperature Coefficient of Reference TCVREF TJ =0 ~ 125C, IOUT = 5mA 1.0 % Voltage On-State Voltage for Control VC(ON) (Note) 2.0 V On-State Current for Control IC(ON) 200 A On-State Voltage for Control VC(OFF) IOUT=0A 0.8 V On-State Current for Control IC(OFF) IOUT=0A,VC=0.4V -2 A Quiescent Current IQ IOUT=0A 8 mA Output Off-State Consumption Current IQS VC=0.4V 5 A Note: In case of VC pin, output voltage turns OFF. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 9 QW-R101-022.D R200LD10 TYPICAL APPLICATION CIRCUIT LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 9 QW-R101-022.D R200LD10 TEST CIRCUIT For Standard Measuring Circuit of Regulation Portion 1 3 3 LINEAR INTEGRATED CIRCUIT VOUT DC Input R200LD10 VIN CI=0.33F R2 CO=10F IOUT A 2 5 IC A A IQ 4 R1 V RL VOUT=VREF*(1+R2/R1) R1=2k,VREF2.65V For Standard Measuring Circuit of Ripple Rejection Critical Rate 1 3 3 IOUT + VOUT DC Input ei ~ VIN CI=0.33F R200LD10 R2 CO=10F eo V~ V 2 5 4 R1 RL 2.7V f=120Hz sine wave ,ei(rms)=0.5V , VIN=5V,VOUT=3.3V(R1=2k) IOUT=0.3A,RR=20log{ei(rms)/eo(rms)} UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 9 QW-R101-022.D R200LD10 TYPICAL CHARACTERISTICS LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 9 QW-R101-022.D R200LD10 TYPICAL CHARACTERISTICS(Cont.) LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 9 QW-R101-022.D R200LD10 LINEAR INTEGRATED CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 9 of 9 QW-R101-022.D |
Price & Availability of R200LD10 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |