 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Oscilent Corporation IF SAW Filter | 815-IF43.75M-B Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 815-IF43.75M-B . TYPE : 15.9 x 5.9 Thru Hole Digital A/V & Broadcasting May 22 2003 43.75 MHz Bandpass Filter 6.2 MHz Bandwidth PART NUMBER : 815-IF43.75M-B . Horizontal : 1.5 MHz/Div Veritical : 10 dB/Div Horizontal : 0.8 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 3 dB Bandwidth 30 dB Bandwidth Lower Sidelobe (35.0 ~ 39.7 MHz) Upper Sidelobe (47.8 ~ 55.0 MHz) Passband Ripple Group Delay Variation Absolute Delay (at Fo) Temperature Coefficient Minimum 43.68 6.2 35 34 Typical 43.75 13.0 6.24 7.63 35.7 35.6 0.6 60 1.38 -72 Maximum 43.82 15.0 7.68 1.0 100 Units MHz dB MHz MHz dB dB dB nsec sec ppm/K * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if43_75b.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 815-IF43.75M-B Page 2 of 2 Source Impedance = 50 ohms Load Impedance = 2 Kohms / 3pF Part No.: 815-IF43.75M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if43_75b.htm 12/28/2005 |
Price & Availability of 815-IF4375M-B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |