|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TDA18272HN Hybrid (analog and digital) Silicon Tuner for terrestrial and cable TV reception Rev. 2 -- 11 August 2010 Product data sheet 1. General description The TDA18272HN is a Silicon Tuner designed for terrestrial and cable TV reception for both analog and digital signals. TDA18272HN/M (Master) is to be used as a stand-alone tuner IC or Master in dual tuner application. TDA18272HN/S (Slave) is only to be used as Slave Silicon Tuner in dual tuner application. The TDA18272HN supports all analog and digital TV standards and delivers a LOW IF (LIF) signal to a demodulator for analog TV and/or a channel demodulator for digital TV. 2. Features and benefits Fully integrated IF selectivity; eliminating the need for external SAW filters Worldwide multistandard terrestrial and cable Fully integrated oscillators Alignment free Single 3.3 V supply voltage Integrated wideband gain control Crystal oscillator output buffer (16 MHz) for single crystal applications I2C-bus interface compatible with 3.3 V microcontrollers Slave tuner output function to drive second (slave) Silicon Tuner Easy programming 5 ms tuning time LIF channel center frequency output ranging from 3 MHz to 5 MHz 1.7 MHz, 6 MHz, 7 MHz, 8 MHz and 10 MHz channel bandwidths Ready for DVB-T2 RoHS compliant 3. Quick reference data Table 1. fRF NFtun Quick reference data Conditions full range of RF input 75 source; maximum gain Min 42 Typ Max Unit 5.0 870 MHz dB RF frequency tuner noise figure Symbol Parameter NXP Semiconductors TDA18272HN Hybrid Silicon Tuner for terrestrial and cable TV reception Quick reference data ...continued Conditions UHF; integrated from 250 Hz to 4 MHz worst case for image rejection and 4 MHz IF frequency for levels above -50 dBm at tuner input and minimum gain Min 57.5 Typ Max Unit 0.4 63 0.6 degree dB phase jitter image rejection Table 1. jit image Symbol Parameter ICP1dB 1 dB input compression point 124 - - dBV 4. Ordering information Table 2. Ordering information Package Name TDA18272HN/M/C1[1] TDA18272HN/S/C1[2] [1] [2] M for master. S for slave. Type number Description plastic thermal enhanced very thin quad flat package; no leads; 40 terminals; body 6 x 6 x 0.85 mm Version SOT618-1 HVQFN40 TDA18272HN_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 2 -- 11 August 2010 2 of 10 xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x Product data sheet Rev. 2 -- 11 August 2010 3 of 10 TDA18272HN_SDS 5. Block diagram NXP Semiconductors CAPRFAGC UHFHIGH VHFHIGH UHFLOW VHFLOW RF input 42-870 MHz SURGE All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. LNA H3H5 filter IR mixer AGCK IF filters IF AGC IFP IFN CB TRAP RFIN RFAGC RF FILTER VIFAGC AGC1 AGC2 AGC3 AGC4 AGC5 Hybrid Silicon Tuner for terrestrial and cable TV reception STO 2nd tuner LO DIVIDERS PLD IRQ I2C-BUS CONTROL AND INTERFACES AS_XTSEL SDA SCL FRAC-N DIVIDER Xtal LC VCO TEMPERATURE SENSOR XTOUT1 XTOUT2 VTUNE XTALN XTALP CP AGC AND DUAL TUNER PROTOCOL PULSE SHAPER VSYNC FREEZE MASTERSYNC TDA18272HN loop filter 001aak482 Fig 1. Block diagram TDA18272HN/M xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx Product data sheet Rev. 2 -- 11 August 2010 4 of 10 TDA18272HN_SDS NXP Semiconductors CAPRFAGC UHFHIGH VHFHIGH UHFLOW VHFLOW LNA H3H5 filter IR mixer AGCK IF filters IF AGC IFP IFN RFIN All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. RF FILTER RFAGC VIFAGC AGC1 AGC2 AGC3 AGC4 AGC5 Hybrid Silicon Tuner for terrestrial and cable TV reception PLD IRQ LO DIVIDERS FRAC-N DIVIDER PULSE SHAPER I2C-BUS CONTROL AND INTERFACES AS_XTSEL SDA SCL VSYNC FREEZE MASTERSYNC LC VCO TEMPERATURE SENSOR XTALP CP XTOUT1 XTOUT2 VTUNE XTALN AGC AND DUAL TUNER PROTOCOL TDA18272HN loop filter 001aal004 Fig 2. Block diagram TDA18272HN/S NXP Semiconductors TDA18272HN Hybrid Silicon Tuner for terrestrial and cable TV reception 6. Limiting values Table 3. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VCC VI supply voltage input voltage pins SDA and SCL all other pins: VCC < 3.3 V VCC > 3.3 V Tstg Tj Tamb VESD storage temperature junction temperature ambient temperature electrostatic discharge voltage EIA/JESD22-A114 (human body model) EIA/JESD22-C101-C (FCDM) class [1] Conditions Min -0.3 -0.3 -0.3 -0.3 -40 -20 -2 750 III[2] Max +3.6 +3.6 Unit V V VCC + 0.3 V +3.6 +150 125 [1] V C C C kV V +2 - The maximum allowed ambient temperature Tamb(max) depends on the assembly conditions of the package and especially on the design of the Printed-Circuit Board (PCB) and die connection. The application mounting must be done in such a way that the maximum junction temperature is never exceeded. The junction temperature can be obtained by reading the temperature sensor bit via I2C-bus. The junction temperature: Tj = Tamb + Tj-c. where Tj-c = power x Rth. Class III: 500 V to 1000 V. [2] 7. Abbreviations Table 4. Acronym AGC AGCK CB DVB DVB-T/T2/C/H ESD FCDM FRAC-N IC IF IRQ LC-VCO LNA LO PCB RF RoHS SAW Abbreviations Description Automatic Gain Control Automatic Gain Control number K Citizens' Band Digital Video Broadcasting DVB-Terrestrial/Terrestrial second generation/Cable/Handheld ElectroStatic Discharge Field-Induced Charged-Device Model FRACtional-N Integrated Circuit Intermediate Frequency Interrupt ReQuest Inductors and Capacitors - Voltage Controlled Oscillator Low-Noise Amplifier Local Oscillator Printed Circuit Board Radio Frequency Restriction on Hazardous Substances Surface Acoustic Wave TDA18272HN_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 2 -- 11 August 2010 5 of 10 NXP Semiconductors TDA18272HN Hybrid Silicon Tuner for terrestrial and cable TV reception Abbreviations ...continued Description Slave Tuner Output Ultra High Frequency Voltage Controlled Oscillator Table 4. Acronym STO UHF VCO 8. Revision history Table 5. Revision history Release date 20100811 Data sheet status Product data sheet Change notice Supersedes Document ID TDA18272HN_SDS v.2[1] [1] Revision 1 is not available TDA18272HN_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 2 -- 11 August 2010 6 of 10 NXP Semiconductors TDA18272HN Hybrid Silicon Tuner for terrestrial and cable TV reception 9. Legal information 9.1 Data sheet status Product status[3] Development Qualification Production Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet [1] [2] [3] Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 9.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. (c) NXP B.V. 2010. All rights reserved. 9.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or TDA18272HN_SDS All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 -- 11 August 2010 7 of 10 NXP Semiconductors TDA18272HN Hybrid Silicon Tuner for terrestrial and cable TV reception Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. 9.4 Licenses ICs with DVB-T or DVB-T2 functionality Use of this product in any manner that complies with the DVB-T or the DVB-T2 standard may require licenses under applicable patents of the DVB-T respectively the DVB-T2 patent portfolio, which license is available from Sisvel S.p.A., Via Sestriere 100, 10060 None (TO), Italy, and under applicable patents of other parties. 9.5 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. I2C-bus -- logo is a trademark of NXP B.V. Silicon Tuner -- is a trademark of NXP B.V. 10. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com TDA18272HN_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 2 -- 11 August 2010 8 of 10 NXP Semiconductors TDA18272HN Hybrid Silicon Tuner for terrestrial and cable TV reception 11. Tables Table 1. Table 2. Table 3. Quick reference data . . . . . . . . . . . . . . . . . . . . .1 Ordering information . . . . . . . . . . . . . . . . . . . . .2 Limiting values . . . . . . . . . . . . . . . . . . . . . . . . . .5 Table 4. Table 5. Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 6 12. Figures Fig 1. Fig 2. Block diagram TDA18272HN/M. . . . . . . . . . . . . . .3 Block diagram TDA18272HN/S . . . . . . . . . . . . . . .4 TDA18272HN_SDS All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved. Product data sheet Rev. 2 -- 11 August 2010 9 of 10 NXP Semiconductors TDA18272HN Hybrid Silicon Tuner for terrestrial and cable TV reception 13. Contents 1 2 3 4 5 6 7 8 9 9.1 9.2 9.3 9.4 9.5 10 11 12 13 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 6 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 7 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 7 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Contact information. . . . . . . . . . . . . . . . . . . . . . 8 Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2010. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 11 August 2010 Document identifier: TDA18272HN_SDS |
Price & Availability of TDA18272HNC1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |