 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 16.8 ~ 30W Power Adaptor with Charging Function Features : Universal AC input / Full range GC30E series With EURO type 6 FT power cord(2pin) Class II power (without earth pin) No load power consumption <1.0W Constant current and voltage(CC,CV mode) Suitable for continue load For high surge current equipment Protections: Short circuit / Overload / Over voltage / Over temp. 2 colors LED indicate for loading status Fully enclosed plastic case High reliability Approvals: TUV / CB / FCC / CE SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE SET AT RATED CURRENT CURRENT RANGE RATED POWER OUTPUT GC30E-0P1J GC30E-0 Note.2 4.2V 2 years warranty GC30E-1P1J GC30E-1 5.6V 3.99A 0 ~ 3.99A 22.38W 50mVp-p 5 ~ 5.8V 0.5% GC30E-11P1J GC30E-11 7.2V 3A 0 ~ 3A 21.6W 80mVp-p 6.5 ~ 7.5V 0.5% GC30E-2P1J GC30E-2 8.4V 3A 0 ~3A 25.2W 80mVp-p 7.7 ~ 8.6V 0.5% GC30E-4P1J GC30E-4 14.3V 2.09A 0 ~ 2.09A 30W 100mVp-p 13.5 ~ 14.5V 0.5% TUV Rheinland Product Safety geprUfre Sicherheit GC30E-5P1J GC30E-5 16.8V 1.6A 0 ~ 1.6A 27W 100mVp-p 16 ~ 17V 0.5% GC30E-6P1J GC30E-6 28.6V 1.04A 0 ~ 1.04A 30W 150mVp-p 27.1 ~ 28.8V 0.5% 4A 0 ~ 4A 16.8W RIPPLE & NOISE (max.) Note.3 50mVp-p CHARGING VOLTAGE RANGE Note.4 3.6 ~ 4.4V LINE REGULATION LED INDICATOR Note.5 1.0% Green LED ON <150 ~ 200mA < Red LED ON SETUP, RISE, HOLD UP TIME 200ms, 50ms, 16ms at full load 90 ~ 264VAC 127 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 47 ~ 63Hz 55% 1A / 100VAC 40A / 230VAC 0.25mA / 240VAC 90 ~ 110% Constant current mode and over 300% pulsing mode Protection type : Constant current limiting, recovers automatically after fault condition is removed 110 ~ 135% rated output voltage Protection type : Clamp by zener diode IC1Tj130 Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes TUV EN60950-1 approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH 70% 74% 76% 78% 78% 80% SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55014-1 class B, FCC part 15 Class B EMC HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY OTHERS CONNECTOR NOTE DIMENSION PACKING PLUG CABLE Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 108*67*36mm (L*W*H) 405g; 36pcs / 16.5kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type center positive for stock ; Other type available by customer requested Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 0% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Output charging voltage range is measured from 0% to 100% rated load. 5.Line regulation is measured from low line to high line at rated load. File Name:GC30E-SPEC 2008-05-08 16.8 ~ 30W Power Adaptor with Charging Function Mechanical Specification 34 19 GC30E series Unit:mm 19 46 69.9 18 33.5 C3 42 45 R1 1830 50 80 20 NAME PLATE RUBBER FOOTx4 106 UL1185 16AWG 1230 50 for 4.2V~8.4V UL1185 18AWG 1830 50 for 14.3V~28.6V 67 11 C"+" POWER LED 107.5 ID 2.1 x OD 5.5 Charging Curve (V,I) Stage 1 Constant Current Area Stage 2 Constant Voltage Area V V max =Rated Voltage I max =Rated Current I Float Charging TIME LED Display LED Status Red Green Load Condition Charging Float Charging Plug Assignment Standard plug: P1J (option) P1J P/N CENTER OUTPUT + Derating Curve 100 Static Characteristics 100 80 70 LOAD (%) LOAD (%) 0 10 20 30 40 50 60 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:GC30E-SPEC 2008-05-08 |
Price & Availability of GC30E-0P1J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |