View SP-480-12_4849190.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

480W Single Output with PFC Function
Features :
Universal AC input / Full range
SP-480
series
Built in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan High power density 5.18w/in3 Low profile:43mm thickness Built-in remote ON-OFF control Built-in remote sense function Active AC surge current limiting 3 years warranty
..
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PEAK LOAD(10min.) OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE Note.4 FUNCTION REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SP-480-3.3 3.3V 85A 0 ~ 85A 280.5W
Note.5 280.5W
SP-480-5 5V 85A 0 ~ 85A 425W 425W 80mVp-p 4.5 ~ 5.5V 2.0% 0.5% 1.0%
SP-480-12 12V 40A 0 ~ 43A 480W 516W 120mVp-p 10.8 ~ 13.2V 1.5% 0.3% 0.5%
SP-480-15 15V 32A 0 ~ 35A 480W 525W 150mVp-p 13.5 ~ 18V 1.5% 0.3% 0.5%
SP-480-24 24V 20A 0 ~ 22A 480W 528W 150mVp-p 22 ~ 27.6V 1.0% 0.2% 0.5%
SP-480-48 48V 10A 0 ~ 11A 480W 528W 240mVp-p 41~ 56V 1.0% 0.2% 0.5%
RIPPLE & NOISE (max.) Note.2 80mVp-p 2.9 ~ 3.6V VOLTAGE TOLERANCE Note.3 2.0% 0.5% 1.0% 18ms/230VAC
Note.7 85 ~ 264VAC
1000ms, 80ms/230VAC
2500ms, 80ms/115VAC at full load
18ms/115VAC at full load 120 ~ 370VDC PF>0.98/115VAC at full load 79% 3.5A/230VAC 40A/230VAC 11.55 ~ 14.85A 57.6 ~ 67.2V 85% 85% 87% 89%
47 ~ 63Hz PF>0.95/230VAC 73% 6.5A/115VAC 20A/115VAC <2mA / 240VAC
87 ~ 103A 87 ~ 103A 45.15 ~ 58.05A 36.75 ~ 47.25A 23.1 ~ 29.7A Protection type : Constant current limiting, recovers automatically after conditions is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 18 ~ 21V 28.8 ~ 33.6V Protection type : Shut down o/p voltage, re-power on to recover 80 (TSW1) detect on heatsink of power transistor 90 (TSW2) detect on heatsink of power diode Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:Short SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms/500VDC EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B (Note 6) Compliance to EN61000-3-2,-3 HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2), light industry level, criteria A 120.5K hrs min. MIL-HDBK-217F (25 ) 278*127*43mm (L*W*H) 1.7Kg; 6pcs/11.3Kg/0.67CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. TSW1: Detect on heatsink of power transistor. TSW2: Detect on heatsink of output diode. 5. 33% Duty cycle maximum within every 30 minute. Average output power should not exceed the rated power. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-480-SPEC 2007-10-25
480W Single Output with PFC Function
Mechanical Specification
216
36
SP-480
Case No. 929A
31
series
Unit:mm
21
9 8 11 7
4-M4 Air flow direction
89 127
5 4 9.25 3 2 11.5 1
1.5 18 max.
25.4 43
8-M4 L=6(Both Sides) 216 278 31
8.8
Terminal Pin No. Assignment :
Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4~6 7~9 Assignment -V +V
Connector P in No. Assignment (CN51) : HRS DF11-6DP-2DS or equivalent
Pin No. 1 2 3 Assignment GND RC-S Pin No. 4 5 6 Assignment N.C. RC+ +S Mating Housing HRS DF11-6DS or equivalent Terminal HRS DF11-**SC or equivalent
Block Diagram
FAN EMI FILTER ACTIVE INRUSH CURRENT LIMITING
fosc : 100KHz
+S RECTIFIERS & P.F.C. POWER SWITCHING RECTIFIERS & FILTER +V -V (GND) -S DETECTION CIRCUIT O.V.P. RC+ RC-
I/P
FG
O.L.P. O.T.P.
PFC/PWM CONTROL
Derating Curve
Static Characteristics
Ta=25
100
100
1
80
90 80
1 Others
60
2
70
2 3.3,5V Only
LOAD (%)
40
LOAD (%)
60 50 40
20
-20
0
10
20
30
40
50
60
(HORIZONTAL)
85
90
115
120
140
165
180
200
220
240
260
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (VAC) 60Hz
File Name:SP-480-SPEC 2007-10-25
60
6
33.5
CN51 2 5 14 ADJ.
19

▲Up To Search▲

Price & Availability of SP-480-12

	To Download SP-480-12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .