 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| System Sensor SpectrAlert Series www.firecontrolinstruments.com Description The System Sensor Spectralert(R) selectable output strobes and horn/strobes offer enhanced features that include the widest range of candela options available, and the capability to recognize and self-adjust for either 12 or 24 volt operation. Spectralert selectable candela wallmounted strobes and horn/strobes offer key performance features long associated with the Spectralert name. The selectable candela strobes and horn/strobes offer average current draws that are not only lower than conventional fixed-candela Spectralert products, but also lower than similar products by others. By consuming less current, the ability to connect even more devices per circuit is possible, resulting in lower installed cost. Spectralert selectable candela strobes and horn/strobes offer the same installation-friendly features synonymous with the Spectralert name, such as the option of 2- and 4-wire operation; the ability to use standard size backboxes with no encroachment into the box; and universal mounting incorporating the labor-saving QuickClickTM feature. Such labor-saving features make wire connections simple and fast, further reducing installed cost. These strobes and horn/strobes offer the broadest range of candela options. In addition, they can operate on either 12V or 24V with no settings required. The device recognizes and self-adjusts to the correct current automatically. Temporal Pattern 3 or continuous tone options continue to be available, in either an electro-mechanical or 3 kHz pattern These strobes and horn/strobes incorporate the same stylish, low profile design of the conventional Spectralert products, for a consistent and aesthetically pleasing appearance across the entire product line. The selectable strobe and horn/strobe is available in either red or white. The devicesmount on a standard 4" x 4" x 11/2" backbox or a single gang 2" x 4" x SELECTABLE OUTPUT STROBES AND HORNS MODELS P1224MC, 17/8" backbox using the universal mountS1224MC ing plate included with each Spectralert unit. An optional strobe sychronization module is available for compliance the Americans with Disabilities Act (ADA). The MDL (red) MDLW (white) synchronizes the strobes at 1 Hz and the horns to a Temporal 3 coded pattern. The synchronization modules mounts on a 4 11/16" x 4 11/16" x 2 1/8" backbox and supports two (2) Style Y (Class B) or one (1) Style Z (Class A) notification appliance circuit. A separate horn control input is available to allow silenceable audible devices and nonsilenceable visual devices on the same pair or wires. Features * * * * * * * * * * Operates on either12 or 24 VDC Widest Range of Candela Options: 12V: 15, 15/75 candela 24V: 15, 15/75, 30, 75, 110 candela Easy Candela Selection Easy DIP Switch Selection for Horn Options Weatherproof Versions Available Eask Mounting with QuickClickTM Synchronization avalable with optional MDL Sync*CircuitTM module Meets UL1971, NFPA72, and ADA Signaling Requirements S5512 S4011 3014150 122-02-E 126-02-E 7125-1209:222 7135-1209:223 An ISO 9001 Company . Specifications are provided for information only, and are not intended to be used for installation purposes and are believed to be accurate. However, no responsibility is assumed by Fire Control Instruments for their use. Specifications subject to change without notice. (c) 2003 All Rights Reserved 9020-0562/Ver. 1.2 Page 1 of 3 SpectrAlert Selectable Output Strobe and Horn/Strobe Spectralert Current Tables AGENCY LISTINGS: Indoor Models: UL, ULC, FM, CSFM, MEA. Weatherproof models: UL, CSFM (strobe only), MEA, ULC. NOTE: All of these products are designed for wall mount only. All weatherproof models must use weatherproof back box model WBB. Installation of strobes lower than 75 cd may be permissible under the equivalent facilitation clause of the ADAAG (Sec. 2.2). However, it is the responsibility of the fire alarm designer to determine the acceptibility of strobes less than 75 candela. All 15/75 candela strobes or horn/strobes are recommended for 20' x 20' rooms or smaller. Specifications are provided for information only, and are not intended to be used for installation purposes and are believed to be accurate. However, no responsibility is assumed by Fire Control Instruments for their use. Specifications subject to change without notice. (c) 2003 All Rights Reserved FIRE CONTROL INSTRUMENTS 16 Southwest Park, Westwood, MA 02090 USA * Tel: 781-471-3000 * Fax: 781-471-3099 * www.firecontrolinstruments.com A Honeywell Company 9020-0562/Ver. 1.2 / Page 2 of 3 SpectrAlert Selectable Output Strobe and Horn/Strobe Specifications Walk Test SpectrAlert horn/strobe and horn only operate on "walk tests" with time durations of 4 seconds or greater Input terminals 12 to 18 AWG Dimensions Strobe and horn/strobe with universal plate 5" x 5 5/8" x 2 15/16" Strobe and horn/strobe with small footprint plate 3 3/8" x 5 5/8" x 2 5/16" Horn with universal mounting plate 5" x 5 5/8" x 1 5/16" Horn without mounting plate 2 15/16" x 5 5/16" x 15/16" Weight, horn only 7.2 0z. Weight, strobe and horn/strobe 8.8 oz. Mounting 4" x 4"x 1 1/2" or 2" x 4" x 17/8" standard boxes Indoor operating temperature 32F to 120F (0C to 49C) Maximum humidity 95% as tested per UL464 Weatherproof (horn and horn/strobe) Operating temperature 32F to 150F (0C to 66C) (Weatherproof strobe only) -40F to 158F (-40C to 70C) Voltages 12 or 24VDC and FWR unfiltered Operating Voltage Range* 12V: 8-17.5 V; 24V: 16-33 V Operating Voltage Range (with Sync*Circuit module MDL) 12V: 9-17.5 V; 24V: 17-33 V * These products should be operated within their rated voltage range; UL does test functional integrity to-20% and +10% of manufacturer's stated ranges. Ordering Information Description Horn/Strobes Red P1224M White P1224MCW WP Voltage Candela Selectable: 15, 15/75, 30, 75, 110* Selectable: 15, 15/75, 30, 75, 110* Avg.mA* @Nom. VDC Avg.mA* @Nom. VDC - P1224MCK 12/24 Strobes S1224MC S1224MCW S1224MCK 12/24 - - *NOTE: Strobes available for 12 V operation in 15 and 15/75 cd only Accessories Sync. Circuit Module MDL Small Mtg Plate for Single Gang Surf. Mt. Back box skirt SMP MDLW SMPW 12/24 NA NA NA 10/11 NA 12/15 NA BBS BBSW NA NA NA NA Universal Mtg. Plate D-MP (replacement) D-MPW NA NA NA NA Specifications are provided for information only, and are not intended to be used for installation purposes and are believed to be accurate. However, no responsibility is assumed by Fire Control Instruments for their use. Specifications subject to change without notice. (c) 2003 All Rights Reserved FIRE CONTROL INSTRUMENTS 16 Southwest Park, Westwood, MA 02090 USA * Tel: 781-471-3000 * Fax: 781-471-3099 * www.firecontrolinstruments.com A Honeywell Company 9020-0562/Ver. 1.2 / Page 3 of 3 |
Price & Availability of S1224MC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |