View DNK1201M_4793745.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DNK1201M
Features
Package 10.2 x 6.0 mm (h=5.5 mm) type, Water clear epoxy
Surface Mount Type/ High-output IRED for Automotive
Product features
Outer Dimension 10.2 x 6.0 x 5.5mm ( L x W x H ) Big Lenz Type Wide operation temperature range. Storage Temperature : -40120 Operating Temperature : -30 95 High Total Output Power : 40mW TYP. (IF=100mA) Operation at 100mA is possible at 85. Lead-free soldering compatible RoHS compliant
Peak Wavelength Half Intensity Angle Die materials Rank grouping parameter Assembly method Soldering methods
870nm x = 42 deg., GaAlAs Sorted by radiant intensity per rank taping Auto pick & place machine (Auto Mounter)
Reflow soldering and manual soldering Please refer to Soldering Conditions about soldering.
y = 42 deg.
Taping and reel ESD
900pcs per reel in a 24mm width tape. (Standard) Reel diameter:330mm 2kV (HBM)
Recommended Applications
Automotive (Camera of Door Mirror, Camera of Crew Detection, Camera of Driver Watch, Rear Head Phone, Back Monitor, Various Sensors)
2009.3.25
Page 1
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Absolute Maximum Ratings
Item Power Dissipation Forward Current Ta=25 Ta=95
1
(Ta=25)
Symbol Pd IF IFRM IF IFRM VR Topr Tstg
Absolute Maximum Ratings 340 200 80 1,000 1.71 8.60 5 -30 +95 -40 +120
Unit mW mA mA mA/ mA/ V
Pulse Forward Current Derating (Ta=25 or higher) Reverse Voltage
Operating Temperature Storage Temperature
1 IFRM Measurement condition : Pulse Width 100 s, Duty 1/100
Electro-Optical Characteristics
Item Symbol Characteristics MIN. Forward Voltage IF=100mA VF TYP. MAX. Pulse Forward Voltage Reverse Current IFRM=1,000mA VR =5V 1.3 1.5 1.7 3.4 200 40 55 (86) 40 870 45 42( x) 42( y) (40) 55 7
(Ta=25)
Conditions
Unit
V
VFM
IR
MAX. MAX. MIN.
V A
Radiant Intensity
IF=100mA
IE
TYP. MAX.
mW/sr
Total Output Power Peak Wavelength Spectral Half-width Half Intensity Angle
IF=100mA IF=100mA IF=100mA IF=100mA
IF=100mADC5mA, -3db from 1MHz
Po p 2 1/2
TYP. TYP. TYP. TYP. MIN. TYP. TYP.
mW nm nm deg.
Cut-off Frequency Response Time
2009.3.25
fc tr/tf
MHz ns
Page 2
IF=100mA
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Radiant Intensity Rank
IEmW/sr Rank MIN. A B C 40 52 64 MAX. 54 70 (86) IF = 100mA Condition
(Ta=25)
Please contact our sales staff concerning rank designation.
2009.3.25
Page 3
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Technical Data
Spectral Distribution
Relative Intensity vs. Wavelength Condition : Ta = 25, IF = 100mA
Spatial Distribution Example
Condition : Ta = 25
Relative Intensity
-30
100
0
30
-60 60 50
-90 -100
0 -50 0 50 100
90
Wavelength [nm]
Forward Voltage vs. Forward Current
Condition : Ta=25
Pulse Forward Voltage vs. Pulse Forward Current
Condition : Ta=25, tw100s, Duty1/100
Forward Voltage : VF(V)
Pulse Forward Current IFRM(mA)
Forward Current IF(mA)
Pulse Forward Voltage : VFM(V)
2009.3.25
Page 4
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Technical Data
Duty Ratio vs. Pulse Forward Current
Condition : Ta = 25, tw 100s
Ambient Temperature vs. Forward Current
Pulse Forward Current IFRM(mA)
Forward Current : IF (mA)
Duty Ratio
Ambient Temperature : Ta()
Derating
Ambient Temperature vs. Maximum Forward Current Condition : tw100s
Frequency
Condition : Ta = 25, IF = 100mADC5mA
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature : Ta()
Relative Radiant Intensity (dB)
Frequency (MHz)
2009.3.25
Page 5
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Technical Data
Ambient Temperature vs. Forward Voltage
Condition : IF = 100mA
Ambient Temperature vs. Pulse Forward Voltage
Condition : IFRM = 1000mA, tw100s, Duty1/100
Forward Voltage VF(V)
Ambient Temperature : Ta ()
Pulse Forward Voltage VFM(V)
Ambient Temperature : Ta ()
Ambient Temperature vs. Peak Wavelength
Condition : IF = 100mA
Ambient Temperature vs. Relative Total Power
Condition : IF = 100mA
Peak Wavelength p (nm)
Ambient Temperature : Ta()
Relative Total Power
Ambient Temperature : Ta ()
2009.3.25
Page 6
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Technical Data
Forward Current vs. Relative Total Power
Condition : Ta = 25
Pulse Forward Current vs. Relative Total Power
Condition : tw100s, Duty1/100, Ta = 25
Relative Total Power
Forward Current : IF (mA)
Relative Total Power
Pulse Forward Current : IFRM (mA)
2009.3.25
Page 7
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Package Dimensions
(Unit: mm) Weight: (1,890)mg
Recommended Soldering Pattern
(Unit: mm)
Taping Specification
Quantity: 900pcs/ reel (standard)
(Unit: mm)
2009.3.25
Page 8
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
Manual Soldering Conditions
Iron tip temp. Soldering time and frequency 350 3s 1 time (MAX.) (30 W Max.) (MAX.) (MAX.)
2009.3.25
Page 9
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Handling Note
1. Handling of the Products Mold resin on the backside of the products has adhesiveness. If dust or your hand is stuck to the backside, please slowly remove the product from there. And if the backside is strongly pushed, it affects the characteristics and reliability. Please be careful in handling. 2. Dirt If dirt sticks to the surface of lens, it affects the radiant intensity. Please don't touch the lens with bare hands. If dirt affects function, please wipe the dirt off carefully not to cause scratches on the lens with lens paper or the like. And if flux is stuck to the lens, please wipe the flux off carefully with alcohol-based cleaner. 3. Dew When the temperature changes suddenly at high temperature and humidity, dew is generated. Because dew is likely to cause reduction in radiant intensity, failure to light up, deterioration of insulation and the like, please care. Because color of lens changes into milky color by rapid cooling at the conditions of high temperature and humidity, please care. 4. Freezing When temperature is below , water of dew and the like freezes. Because freezing is likely to cause reduction in radiant intensity, failure to light up, deterioration of insulation and the like, please care. 5. Strength When mounting, assembling, cleaning the lens, storing the products and the like, please be careful not to apply mechanical stress and excessive vibration to products. They are likely to cause cracks, delamination and bending terminal. And they are likely to affect the characteristics and reliability badly. 6. Mechanical stress to terminals When storing products and soldering, please be careful not to apply mechanical stress and excessive vibration to terminals. They are likely to cause cracks, delamination and bending terminal. And they are likely to affect the characteristics and reliability badly. 7. Backside Dust is stuck to the backside easily on construction of this product. There is no problem on the characteristic even if dust is stuck to the backside. Please be careful not to wipe off forcibly and not to rub. 8. Moisture Absorption If you use soldering with the over-specified humidity conditions, it affects the characteristics and reliability. Please use with the specified conditions. 9. Discoloration This product might discolor by the heat of reflow and might change to yellowish. But there is no problem on the characteristic and reliability. 10. Application Please stop to use by the applications that the breakdown and the wrong operation might influence the life or the human body. 11. Other When there is a process of supersonic wave welding etc after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). Please use after affirming beforehand there is no problem. If this product is used excluding the content described to these specifications, we do not take any responsibility. If you use it excluding these ratings, please consult us beforehand. Safety of Near-Infrared Rays It is generally said that the near-infrared rays(870nm) used for this product is harmless to humans. But we can not say that direct rays to eyes are always safe as well as the visual light. Please pay attention when the product is used.
2009.3.25 Page 10
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Reliability Testing Result
Reliability Testing Result Applicable Standard Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Thermal Shock High Temp. Storage Life Low Temp. Storage Life Resistance to Soldering Heat Electric Static Discharge (ESD) Vibration, Variable Frequency Shock EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/100(105) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/300(301) EIAJ ED4701/300(304) EIAJ ED4701/400(403) EIAJ ED4701/400(404) Testing Conditions Ta = 25, IF = 200mA Ta = 25, IFRM = 1,000mA, (tw=100s, Duty=1/100) Ta = 95, IF = 80mA Ta = -30, IF = 200mA Ta = 85, 85%, IF = 100mA Ta = -40 120 (each 15min.) Ta = 120 Ta = -40 (Pretreatment) Individual standard (Reflow Soldering) Pre-heating 180 120s Operating Heating 250 5s C = 100pF, R2 = 1.5K, 2,000V 44.1m/s (4.5G), 20 500Hz, 20min, XYZ each direction 5000m/s (510G), 0.5ms, 6directions
2 2
Duration
Failure
1,000 h 0/20 1,000 h 0/20 1,000 h 0/20 1,000 h 0/20 1,000 h 0/20 1,000 cycles 0/20 1,000 h 0/20 1,000 h 0/20 Twice 0/20 once each polarity 0/10 2 h 0/10 3 times 0/10
Failure Criteria
Items
Radiant Intensity Forward Voltage Reverse Current Cosmetic Appearance
Symbols
IE VF IR -
Conditions
IF Value of each product Radiant Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V -
Failure criteria
Testing Min. Value Initial Value x 0.5 Testing Max. Value Spec. Max. Value x 1.2 Testing Max. Value Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking
2009.3.25
Page 11
DNK1201M
Surface Mount Type/ High-output IRED for Automotive
Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the "Foreign Exchange and Foreign Trade Control Law," it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com
2009.3.25
Page 12

▲Up To Search▲

Price & Availability of DNK1201M

	To Download DNK1201M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .