 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| China Electronics Technology Group Corporation No.26 Research Institute DIELECTRIC FILTER SPECIFICATION www.sipatsaw.com 1. MODEL NUMBER MODEL NUMBER. DF1335S36B CUSTOMER PART NO. SIPAT Co., Ltd. Part Number:DF1335S36B 2. TEST CONDITION 2-1 TYPICAL CONDITION : -TEMPERATURE : 20 -HUMIDITY : 65%RH 2-2 STANDARD CONDITION : -TEMPERATURE :5 to 35 -HUMIDITY 3. COMPOSITION AND MATERIAL NO. 3-1 3-2 3-3 3-4 RESONATOR NUMBER OF POLE IN/OUTPUT TERMINALS GROUND BASE NAME COMPOSITION AND MATERIALS DIELECTRIC MATERIALS 2 POLE Ag or Sn PLATED Ag or Sn PLATED : 45%RH to 85%RH 4. ELECTRICAL SPECIFICATIONS NO. 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 ITEM CENTER FREQUENCY(fo) BAND WIDTH INSERTION LOSS IN BW RIPPLE V.S.W.R IN BW ATTENUATION INPUT POWER NOMINAL CHARACTERISIC IMPEDANCE SPECIFICATIONS 1335.0MHz 18.0MHz 2.5dB max. 0.5dB max. 1.5 max. 30dB min. at 1005MHz 1W 50 5. ENVIRONMENTAL SPECIFICATIONS 5-1 TEMPERATURE CHARACTERISTICS THE SPECIMEN SHOULD SATISFY THE CHARATERISTICS SPECIFIED IN ITEM 4 AT THE TEMPERATURE RANGE OF -30 TO +85. 5-2 HEAT PROOF SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. DF1335S36B 2005-7-26 1.0 Page 1/5 Phone: +86-23-62920684 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute DIELECTRIC FILTER SPECIFICATION www.sipatsaw.com SIPAT Co., Ltd. Part Number:DF1335S36B THE SPECIMEN SHOULD SATISFY THE CHARACTERISTICS SPECIFIED IN ITEM 4 AFTER EXPOSED TO THE TEMPERATURE 853 FOR 242 HOURS. 5-3 COLD PROOF THE SPECIMEN SHOULD SATISFY THE CHARACTERISTICS SPECIFIED IN ITEM 4 AFTER EXPOSED TO THE TEMPERATURE -403 FOR 242 HOURS. 5-4 MOISTURE PROOF THE SPECIMEN SHOULD SATISFY THE CHARACTERISTICS SPECIFIED IN ITEM 4 AFTER EXPOSED TO THE TEMPERATURE -403 AND HUMIDITY 90 TO 95% FOR 482 HOURS. 5-5 VIBRATION THE SPECIMEN SHOULD SATISFY THE CHARACTERISTICS SPECIFIED IN ITEM 4 AFTER APPLIED THE VIBRATION OF 10 TO 55Hz WITH AMPLITUDE OF 1.5mm FOR 2 HOURS EACH FOR X,Y AND Z DIRECTIONS. 5-6 DROP SHOCK THE SPECIMEN SHOULD SATISFY THE CHARACTERISTICS SPECIFIED IN ITEM 4 AFTER DROPPED ONTO THE HARD WOODEN BOARD FROM HEIGHT OF 50cm FOR 3 TIMES TOWARD EACH OF X,Y AND Z DIRECTIONS EXCEPT TERMINAL DIRECTION. 5-7 SOLDER HEAT PROOF THE SPECIMEN SHOULD SATISFY THE CHARACTERISTICS SPECIFIED IN ITEM 4 AFTER THE LENGTH 1 TO 1.5mm FROM BOTTOM OF TERMINAL IS PRESERVED IN SOLDER BATH OF 23010 FOR 101 SECONDS. 5-8 TENSILE STRENGTH OF TERMINAL THE SPECIMEN SHOULD SATISFY THE CHARACTERISTICS SPECIFIED IN ITEM 4 AND NOT BE BROKEN AFTER TENSILE FORCE OF 1.0Kg IS APPLIED TO THE TERMINAL IN THE DIRECTION OF AXIS FOR 101 SECOND. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. DF1335S36B 2005-7-26 1.0 Page 2/5 Phone: +86-23-62920684 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute DIELECTRIC FILTER SPECIFICATION www.sipatsaw.com 6. APPEARANCES AND DIMENSIONS SIPAT Co., Ltd. Part Number:DF1335S36B 6.0 0.7 3.0 1.0 TOLERANCE:0.3 (UNIT:mm) 7. RECOMMENDED REFLOW PAD 8.0 2.4 0.4 1.3 1.1 1.4 0.7 5.4 I/O I/O 1.3 IN/OUT PORT SOLDERING POINT GROUND SOLDERING POINT TOLERANCE:0.3 (UNIT:mm) 8. REFLOW SOLDERING STANDARD CONDITIONS SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. 1.3 1.3 DF1335S36B 2005-7-26 1.0 Page 3/5 Phone: +86-23-62920684 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute DIELECTRIC FILTER SPECIFICATION www.sipatsaw.com SIPAT Co., Ltd. Part Number:DF1335S36B SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. DF1335S36B 2005-7-26 1.0 Page 4/5 Phone: +86-23-62920684 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute DIELECTRIC FILTER SPECIFICATION www.sipatsaw.com SIPAT Co., Ltd. Part Number:DF1335S36B SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. DF1335S36B 2005-7-26 1.0 Page 5/5 Phone: +86-23-62920684 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com |
Price & Availability of DF1335S36B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |