 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PSS150 Series 150 Watt Single Output AC/DC Power Supply FEATURES 2 Year Warranty Low Cost, High Reliability Fixed Switching Frequency Compact Size, Light Weight AC Input Selectable by Switch 100% Full Load Burn-In Tested Cooling by Free Air Convection EN55022, IEC801-2,3,4 and IEC555-2 UL1950 and TUV EN60950 Approved Built-In EMI Filter, Low Ripple and Noise High Efficiency, Low Working Temperature Soft Start Circuit, Limiting AC Surge Current Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: PSS150 Series All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 88 ~ 132VAC / 176 ~ 264VAC selected by switch (248 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 3.2A @ 115VAC 1.6A @ 230VAC Inrush Current (typical) Cold Start 35A Leakage Current < 3.5mA @ 240VAC OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) PSS-150-5: 2.0%; Other Models: 1.0% Voltage Adjustment Range See Table Line Regulation 5 & 7.5V outputs: 0.5% 9 - 15V outputs: 0.3% 24 - 48V outputs: 0.2% Load Regulation 5 & 7.5V outputs: 0.5% 9 - 15V outputs: 0.3% 24 - 48V outputs: 0.2% Output Current See Table Ripple & Noise (max) (See Note 2) See Table Setup, Rise Time 100ms, 50ms @ full load Hold Up Time (typical) 28ms @ full load Temperature Coefficient 0.03%/C (0 ~ 50C) PROTECTION 105 ~ 150% rated output power Overload Protection Protection Type: Shutdown output voltage, re-power on to recover. See Table Over Voltage Protection Protection Type: Shutdown output voltage, re-power on to recover. GENERAL SPECIFICATIONS Switching Frequency 25KHz Efficiency See Table Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100M/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10C to +60C (refer to output load derating curve) Storage Temperature -20C to +85C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Cooling Free air convection Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 286,700 hours min. @ 25C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 800 grams Dimensions 199(L) x 110(W) x 50(H) mm Warranty 2 years SAFETY & EMC Safety Standards UL1012, UL60950-1, TUV EN60950-1 Approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light Industry level, criteria A o Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS150 Series 150 Watt Single Output AC/DC Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Number PSS-150-5 PSS-150-7.5 PSS-150-9 PSS-150-12 PSS-150-13.5 PSS-150-15 PSS-150-24 PSS-150-27 PSS-150-48 88 ~ 132 VAC or 176 ~ 264 VAC Input Voltage Output Voltage 5 VDC 7.5 VDC 9 VDC 12 VDC 13.5 VDC 15 VDC 24 VDC 27 VDC 48 VDC Voltage Over Voltage Adjust. Range Protection 4.5 ~ 5.5V 6 ~ 8.3V 8 ~ 10.4V 10.6 ~ 13.2V 12 ~ 15V 13.5 ~ 16.5V 21 ~ 28V 24 ~ 30V 43 ~ 53V 5.75 ~ 6.75V 8.63 ~ 10.13V 10.35 ~ 12.2V 13.8 ~ 16.2V 15.53 ~ 18.2V 17.25 ~ 20.3V 30 ~ 34.8V 31.1 ~ 36.45V 55.2 ~ 64.8V Output Current 30A 20A 16.7A 12.5A 11.2A 10A 6.5A 5.6A 3.2A Ripple & Noise 150mVp-p 150mVp-p 180mVp-p 180mVp-p 180mVp-p 180mVp-p 240mVp-p 240mVp-p 240mVp-p Output Power 150W 150W 150.3W 150W 151.2W 150W 156W 151.2W 153.6W Efficiency 78% 80% 80% 82% 83% 84% 85% 86% 87% NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF& 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. This power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. DERATING CURVE STATIC CHARACTERISTICS (24V) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS150 Series 150 Watt Single Output AC/DC Power Supply MECHANICAL DRAWING Unit: mm Terminal Pin No. Assignment Pin No. 1 2 3 4,5 6,7 Assignment AC/L AC/N FG DC OUTPUT (-V) DC OUTPUT (+V) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of PSS150
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |