View CX-1-03_4750740.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CX MINIATURE CRYSTALS
530kHz to 2.1MHz MINIATURE QUARTZ CRYSTAL FOR PARALLEL OSCILLATORS
EUROQUARTZ
Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk
CX-1-03
Page 1 of 2
General Description
The CX-1 quartz crystal is a high quality extensional mode resonator. The CX-1 is hermetically sealed in a rugged, miniature ceramic package, a quarter of the size of an eight pin dual-in-line package. The crystal is manufactured utilizing a photo-lithographic process, ensuring consistency and repeatability of electrical characteristics.
0.7

Extensional mode Ideal for use with microprocessors Designed for low-power applications Compatible with hybrid packaging Low ageing Full military environmental testing available Ideal for battery operated applications
Specification
530kHz to 2.1MHz Extensional A 0.05% (500ppm) B 0.1% C 1.0% 7pF Load Capacitance: 3kW max. Motional Resistance (R): 1.2fF Motional Capacitance (C): 150,000 Quality Factor (Q): 1.0pF max. Shunt Capacitance (C): 3mW max. Drive Level: 35C Turning Point (T)**: -0.035ppm/C Temperature Coefficient (k): Note: Frequency deviation (f) from frequency (fo) @ turning point f-fo k(T-To) temperature (To): =
Frequency Range: Functional Mode: Calibration Tolerance*:
2
7.6
8.1
2.0
3.8
3.8
Outline and Dimensions
Equivalent Circuit
L R
1
C C
2
L Motional Inductance C Motional Capacitance C Shunt Capacitance
R Motional Resistance
5ppm max. 750g 0.3ms, 1/2 sine 10g rms 10-1,000Hz random -10~+70C (commercial) -40~+85C (industrial) -55~+125C (military) -55C~+125C Storage Temperature: Lead to Package temp. not to Process Temperature: exceed 175C Glass lid to package seal rim temp. not to exceed 210C Specifications are typical at 25C unless otherwise indicated. * Closer calibration available ** Other turning point available
Ageing, first year: Shock: Vibration, survival: Operating Temperature:
fo
CX MINIATURE CRYSTALS
530kHz to 2.1MHz MINIATURE QUARTZ CRYSTAL FOR PARALLEL OSCILLATORS
EUROQUARTZ
Telephone: +44(0)1460 230000 Fax: +44(0)1460 230001 Email: sales@euroquartz.co.uk Web: www.euroquartz.co.uk
CX-1-03
Page 2 of 2
Typical Application
Typical application for Pierce oscillator
The low-profile CX miniature leaded crystal is ideal for small, high density, battery operated portable products. A CX crystal incorporated into a Pierce oscillator (single inverter) circuit provides a high stability with low current consumption. A conventional HCMOS Pierce oscillator circuit is shown below. The crystal is effectively inductive and in a Pi-network circuit with C and C providing the additional phase shift necessary to sustain oscillation. The oscillation frequency (f ) is 15 to 150ppm above the crystals series resonant frequency (f ).
1 2 0 S
Conventional HCMOS Pierce Oscillator Circuit
RB Amplifier
Buffer Osc. Freq. (Fo)
Drive Level
A
C5
R)
R is used to limit the crystals drive level by forming a voltage divider between R and C . R also stabilizes the oscillator against changes in the amplifiers output resistance (R ). R should be increased for higher voltage operation.
A 1 A 0 A
C
CX-1
C
Load Capacitance
L
The CX crystal calibration tolerance is influenced by the effective circuit capacitances, specified as the load capacitance (C ). C is approximately equal to:
L
Packaging
CX-1-03 - Tray Pack (Standard)
C x C2 CL = 1 C C1 + C2 + S
NOTE: C and C include stray layout capacitance to ground. C is the stray shunt capacitance between the crystal terminals. In practice, the effective valus of C will be less than that calculated from C , C , and CS values due to the effect of the amplifier output resistance. C should be minimized. The oscillation frequency (f ) is approximately equal to:
1 2 S L 1 2 S 0
f 0 = f S 1+
S
C1 2(C0 + CL )
Where F = Series resonant frequency of the crystal C = Motional Capacitance C = Shunt Capacitance
1 0
Order Code
CX-1
Blank = Glass Lid C = Ceramic Lid Frequency
-03
1.0MHz
(A / I)
Temperature Range: C = Commercial I = Industrial M = Military S = Specify
"S" if special or custom design Blank if standard
Side leads
Calibration Tolerance* @ 25C (A) *For other calibrations (B) (C) insert value in ppm

▲Up To Search▲

Price & Availability of CX-1-03

	To Download CX-1-03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .