View HSMH-C660_4696228.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HSMx - C660
Right Angle Surface Mount Chip LEDs
Data Sheet
Description
The HSMx-C660 series of chip-type LEDs are designed to illuminate at a right angle to the direction of mounting. When mounted on a PC board, these devices will emit light in a direction parallel to the board. The small 3.0 x 2.0 mm footprint of the HSMx-C660 is designed for applications where space is limited. These devices are available in four colors and use untinted, non-diffused optics. The HSMx-C660 series of parts are compatible with IR reflow soldering process only.
Package Dimensions
CATHODE 3.0 ANODE
1.0 0.3 0.3
2.0
Features
* * * * Right Angle Mounting Compatible with IR Reflow Soldering Process Available in a Wide Variety of Colors Available in 8 mm Tape on 178 mm (7") Diameter Reels
2.0 1.0
0.25 0.88 CATHODE
0.25
Applications
* * * * LCD Backlighting Keypad Side/Backlighting Light Piping Right Angle Indicator
ANODE
POLARITYMARK
R0.45 TOREINFORCESOLDERING (NON-PINCONNECTION)
Footprint (mm) 3.0 x 2.0 x 1.0
Parts perReel 3000
DHAS AlGaAs HSMH-C660
High EfficiencyRed HSMS-C660
HSMX-S660PkgDimensionC660
Yellow HSMY-C660
Green HSMG-C660
AbsoluteMaximumRatingsatTA=25C Parameter DC Forward Current[1] Power Dissipation Reverse Voltage (IR = 100 A) Operating Temperature Range Storage Temperature Range[2]
Notes: 1. Derate linearly as shown on Figure 4.
HSMx-C660 25 65 5 -30 to +85 -40 to +100
Units mA mW V C C
OpticalCharacteristicsatTA=25C PartNo. HSMH-C660 HSMS-C660 Color DH AlGaAs Red High Efficiency Red Yellow Green Luminous IntensityIv (mcd)@ IF=20mA Min. Typ. 6.3 16.0 Peak Wavelength peak(nm) Typ. 650 Color Dominant Wavelength d[1](nm) Typ. 639 Viewing Angle 21/2 (degrees)[2] Typ. 155 Luminous Efficacy v (lm/W) 80
1.6 1.6 4.0
5.0 5.0 9.0
639 589 570
626 586 572
155 155 155
145 500 595
HSMY-C660 HSMG-C660
Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED package. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
ElectricalCharacteristicsatTA=25C PartNo. HSMH-C660 HSMS-C660 Color DH AlGaAs Red High Efficiency Red Yellow Green Forward VoltageVF (Volts)@ IF=20mA Typ. Max. 1.8 2.2 Reverse Breakdown VR(Volts)@ IR=100A Min. 5 CapacitanceC (pF)VF=0, f=1MHz Typ. 4.5 Thermal Resistance RJ-PIN(C/W) 300
1.9 2.1 2.2
2.6 2.6 2.6
5 5 5
4.0 3.0 8.0
300 300 300
HSMY-C660 HSMG-C660
2
ColorBinLimits(Green) BinID A B C D E Tolerance : 1nm ColorBinLimits(Yellow) BinID A B C D E F Tolerance : 1nm ColorBinLimits(AlGaAsRed) BinID Tolerance : 1nm DominantWavelength(nm) Minimum 630.0 Maximum 650.0 DominantWavelength(nm) Minimum 582.0 584.5 587.0 589.5 592.0 594.5 Maximum 584.5 587.0 589.5 592.0 594.5 597.0 DominantWavelength(nm) Minimum 561.5 564.5 567.5 570.5 573.5 Maximum 564.5 567.5 570.5 573.5 576.5
LightIntensity(Iv)BinLimits[1] BinID Minimum A B C D E F G H J K L M N P Q R S T 0.11 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 28.50 45.00 71.50 112.50 180.00 285.00 Intensity(mcd) Maximum 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 28.50 45.00 71.50 112.50 180.00 285.00 450.00
Tolerance : 15%
Notes: 1. Bin categories are established for classifi-cation of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins.
ColorBinLimits(HighEfficiencyRed) BinID Tolerance : 1nm DominantWavelength(nm) Minimum 615.0 Maximum 630.0
3
1.0
GREEN
AlGaAsRED
RELATIVEINTENSITY
HIGHEFFICIENCYRED 0.5
YELLOW
0
500
550
600
650
700
750
WAVELENGTH-nm
Figure1.RelativeIntensityvs.Wavelength.
30 IE-FORWARDCURRENT-mA 25 20 15 10 5 0
RELATIVELUMINOUSINTENSITY (NORMALIZEDAT20mA)
1.6
30
IF-FORWARDCURRENT-mA
0 5 10 15 20 25
YELLOW AlGaAs RED HER GREEN
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
25 20 15 10 5 0
1.0
1.5
2.0
2.5
3.0
0
20
40
60
80
100
VF-FORWARDVOLTAGE-V
IDC-DCFORWARDCURRENT-mA
TA-AMBIENTTEMPERATURE-C
Figure2.ForwardCurrentvs.Forward Voltage.
Figure3.RelativeLuminousIntensityvs. DCForwardCurrent.
HSMX-R661fig3
Figure4.MaximumDCCurrentvs.AmbientTemperature.
HSMX-R&fig4
20 30 40 50 60 70 80 90
10
0 1.0
NORMALIZEDINTENSITY
0.8 0.6 0.4 0.2
10 20 30 40 50 60 70 80 90 100 ANGULARDISPLACEMENT-DEGREES
Figure5.HSMx-C660Intensityvs.Angle,VerticalAxis.
HSMX-S660fig5
4
Figure6.Recommendedsolderinglandpattern. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1mm (0.004in.) unless otherwise specified.
Figure7.Recommendedreflowsolderingprofile.
Figure8.RecommendedPb-freereflowsolderingprofile.
USERFEEDDIRECTION
CATHODESIDE
PRINTEDLABEL
Figure9.ReelingOrientationfortheHSMx-C660.
HSMX-R661fig11
5
8.0 1.0 (0.315 0.039) 10.50 1.0 (0.413 0.039) O 20.20 MIN. (O 0.795 MIN.)
O 13.1 0.5 (O 0.516 0.020) 3.0 0.5 (0.118 0.020)
178.40 1.00 (7.024 0.039)
59.60 1.00 (2.346 0.039)
4.0 0.5 (0.157 0.020)
6 PS
5.0 0.5 (0.197 0.020)
Figure10.ReelDimensions.
TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PARTNUMBER HSMx-C660 DIM.A 0.10(0.004) 3.35 (0.132) DIM.B 0.10(0.004) 2.30 (0.091) DIM.C 0.10(0.004) 1.20 (0.047)
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1mm (0.004in.) unless otherwise specified. Figure11.TapeDimensions.
6
END
START
THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
MOUNTED WITH COMPONENTS
THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
150 mm-360 mm (5.9 - 14.2 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE.
Figure12.TapeLeaderandTrailerDimensions.
ReflowSoldering:
HSMX-R661 fig 14
For more information on reflow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator Components. StorageCondition: 5 to 30C @ 60%RH max. Baking is required before mounting, if: 1. Humidity Indicator Card is > 10% when read at 23 5C. 2. Device expose to factory conditions <30C/60%RH more than 672 hours. Recommended baking condition: 605C for 20 hours.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5989-0165EN AV01-0118EN -April 24, 2006
7

▲Up To Search▲

Price & Availability of HSMH-C660

	To Download HSMH-C660 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .