 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SPECIFICATION FOR COTCO LED LAMP MODEL No : DOC. No : LS1-TYL1-01-MT 03 11Nov04 Description: 120 Degree 4.0x 4.0mm Side SMD in Amber Color with Water Transparent *This specification is only for MT* Dice Material: AlGaInP Confirmed by Customer: Date: ATTENTION OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES COTCO LUMINANT DEVICE (HUIZHOU) LTD. For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: info@marktechopto.com Model No. LS1-TYL1-01-MT Doc. No. 02 03Nov04 Applications: Dimension Drawing - Optical indicators Coupling into light guides Back lights(LCD, switches, keys, displays, illuminated advertising,general lighting) Interior automotive lighting.(e.g.dashboard backlighting, etc. ) Automobile's Applications Marker lights (e.g. steps, exit ways, etc) Signal and symbol luminaire Absolute Maximum Ratings at Ta = 25C Items Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Symbo Absolute maximum Rating IF IFP VR PD Topr Tstg Tj duty <=1/10 Unit mA mA V mW CATHODE SPACING ANODE 50 200 5 130 -40 ~ + 100 -40 ~ + 100 +110 CATHODE MARKING C C C Dimensions are specified as follows: mm. Junction temperature *pulse width <=0.1msec Typical Electrical & Optical Characteristics ( Ta = 25C) ) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage Reverse Current VF IR IF = 20mA VR = 5V ----- 2.1 --- 2.6 10 V A Luminous Intensity IV IF = 20mA 224 320 --- mcd Dominant Wavelength D IF = 20mA 584 591 596 nm 50% Power Angle 2 1/2 IF = 20mA --- 120 --- deg 2/4 COTCO-D-074 REV.1 Model No. LS1-TYL1-01-MT Doc. No. 02 03Nov04 Standard bins for LS1-TYL1-01-MT (IF = 20mA): Lamps are sorted to Luminous Intensity -IV , VF & Dominant Wavelength -D bins shown. Orders for LS1-TYL1-01-MT may be filled with any or all bins contained as below. All Luminous Intensity -IV , VF & Dominant Wavelength -D values shown and specified are at If=20mA. * S2+ X2 X3 X4 X5 450mcd T2 355mcd T1 280mcd S2 224mcd 584nm 587nm 590nm 593nm 596nm Dominant Wavelength (D) *S2+ indicates Luminous Intensity is at S2 bin or above. Forward Voltage (VF) Rank Voltage V2 1.8-2.0V V3 2.0-2.2V V4 2.2-2.4V V5 2.4-2.6V #The quantity not enough for full reel VF(V) 1.8-2.2 2.2-2.6 Important Notes: 1) All ranks will be included per delivery, rank ratio will be determined by Cotco. 2) Tolerance of measurement of luminous intensity is 10% 3) Tolerance of measurement of dominant wavelength is 1nm. 4) Tolerance of measurement of Vf is 0.05 V. 5) Packaging methods are available for selection, please refer to PACKAGING STANDARD. #The notice is only apply quantity not enough for full reel. 6) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 3/4 COTCO-D-074 REV.1 Model No. LS1-TYL1-01-MT Doc. No. 02 03Nov04 Graphs If (mA) 100.0 80.0 60.0 40.0 20.0 0.0 2.0 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -60 Vr(V) -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 RELATIVE LUMINOUS INTENSITY 5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 FIG.3 FORWARD CURRENT. Half Power WL=20nm Domi WL= 591nm 100% 75% 50% 25% 0% 300 WL(nm) 800 I (RELATIVE INTENSITY) 400 500 600 700 FIG.4 RELATIVE INTENSITY VS. WAVE LENGTH. IF(mA) 100 80 60 40 20 0 0 20 40 60 80 Rth j-a=350 C/W T ( C) 100 -90 Rth j-s=250 C/W 50% Power Angle : 0 Ie(%) 100% 80% 60% 40% 20% -60 -30 0 30 60 90 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C FIG.6 SPATIAL DISTRIBUTION. Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) Items Prepared by Checked by Approved by ECN# Signatures Meiliping TangShR Thomson Date 2004/11/11 2004/11/11 2004/11/11 DOC. No. 02 03Nov04 Revision History CHANGE DESCRIPTION Change Dimension Drawing, IV Rank&form, max current from 50 to 20, PD from 150 to 55, Graphs; cancel Rthj-s 03 11Nov04 Change max current from 20 to 50, PD from 55 to 130;Change Graphs: FIG5. ECN-H20040299 Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. Obsoletes Doc: 02 03Nov04 4/4 COTCO-D-074 REV.1 |
Price & Availability of LS1-TYL1-01-MT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |