View JV-12S-KT_4665258.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

POWER RELAY
1 POLE--5 A (MEDIUM LOAD CONTROL)
JV SERIES
n FEATURES
l l l
RoHS compliant
l
l
l
l l l
UL, CSA, VDE, SEMKO, CQC recognized UL class B (130C) insulation Low profile and space saving --Height: 12.5 mm --Mounting space: 175 mm2 High sensitivity in small package --Operating power: 0.112 to 0.13 W --Nominal power: 0.2 to 0.3 W High insulation with reinforced insulation system (between coil and contacts) --Insulation distance: 8 mm --Dielectric strength: 5,000 VAC --Surge strength: 10,000 V Plastic materials --UL94 flame class V-0 --UL CTI level class 2 Plastic sealed type Cadmium free contacts RoHS compliant since date code: 0434R Please see page 5 for more information
n ORDERING INFORMATION
[Example]
(a) (b) (c) (d) (e)
JV - 12 (a) (*) (b)
S-K (c) (d)
T (e)
JV : JV Series Refer to the COIL DATA CHART Nil : Standard type (300mW) S : High sensitivity type (200mW) K : Plastic sealed type T : High density mounting type (avoid reverse insertion)
Series Name Nominal Voltage Coil Type Enclosure Mounting
Note: Actual marking omits the hyphen (-) of (*)
1
JV SERIES
n COIL DATA CHART
MODEL JV- 3-KT Standard Type JV- 5-KT JV- 6-KT JV- 9-KT JV-12-KT JV-24-KT JV-48-KT JV- 3S-KT High Sensitivity Type JV- 5S-KT JV- 6S-KT JV- 9S-KT JV-12S-KT JV-18S-KT JV-24S-KT Nominal voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24VDC 48 VDC 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC Coil resistance (10%) 30 83.3 120 270 480 1,920 7,680 45 125 180 405 720 1,620 2,880 Must operate voltage* +1.98 VDC +3.3 VDC +3.96 VDC +5.94 VDC +7.9 VDC +15.8 VDC +31.7 VDC +2.25 VDC +3.75 VDC +4.5 VDC +6.75 VDC +9.0 VDC +13.5 VDC +18.0 VDC Must release voltage* +0.15 VDC +0.25 VDC +0.3 VDC +0.45 VDC +0.6 VDC +1.2 VDC +2.4 VDC +0.15 VDC +0.25 VDC +0.3 VDC +0.45 VDC +0.6 VDC +0.9 VDC +1.2 VDC Nominal power 300 mW 300 mW 300 mW 300 mW 300 mW 300 mW 300 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW
Note : All values in the table are measured at 20C. *: Pulse operate
2
JV SERIES
n SPECIFICATIONS
Item Contact Arrangement Material Configuration Resistance (initial) Rating Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Load* Coil Nominal Power (at 20C) Operate Power (at 20C) Operating Temperature Time Value Life Other Operate (at nominal voltage) Release (at nominal voltage) Mechanical Electrical Vibration Misoperation Resistance Endurance Shock Misoperation Resistance Endurance Weight *1
1
Standard Type JV-( ) 1 form A (SPST-NO) Silver alloy Single type Maximum 70 m (at 1 A 6 VDC) 5 A 250 VAC or 5 A 30 VDC (resistive load) 5A 1,250 VA, 150 W 250 VAC, 150 VDC 5A 100 mA 5 VDC 300 mW 130 mW -40C to +70C (no frost) Maximum 8 ms Maximum 4 ms 5 x 10 6 operations minimum
High Sensitivity Type JV-( ) S
200 mW 113 mW
1 x 10 5 operations minimum (at contact rating) 10 to 55 Hz (double amplitude of 1.65 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 100 m/s 2 (11 1 ms) 1,000 m/s 2 (6 1 ms) Approximately 4.3 g
Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
3
JV SERIES
n
Item
INSULATION
Standard type Min. 1,000 M 750 VAC 1min. 5,000 VAC 1 min. 10,000V 1.2 x 50s standard wave open contacts coil and contacts High sensitivity type
Resistance (500VDC) Dielectric strength
Surge voltage
n SAFETY STANDARD AND FILE NUMBERS
Type UL CSA VDE Compliance UL 508, UL 873, E56140 C22.2 No. 14, LR35579 0435, 0631, 0700 Contact rating Flammabiliaty: UL94V-0 (pastics) 5A, 250 VAC / 30 VDC (resistive) 1/8 HP, 125VAC/250VAC Pilot duty: C300
Also complies with SEMKO, CQC. Please contact sales office when SEMKO, CQC logo marking is neccessary on the cover.
n REFERENCE DATA
20
Timing
JV type
20
Timing
JV-S type
16
16
Time (ms)
Time (ms)
Operate Release
12
12
8
8 Operate Release
4
4
0
0.1
0.2
0.3
0.4
0.5
0.6
0
0.1
0.2
0.3
0.4
0.5
0.6
Coil power (W)
Coil power (W)
4
JV SERIES
Life Curve
120 VAC
250 VAC 30VDC
AC120V coso=0.7
300 200
Operation (x104)
100 50 30 20 10 5 3 2 1 0
30 VDC
Multiplying Factor
AC250V coso=0.7
120VAC coso=0.4
250VAC coso=0.4 30VDC
1 2 3 4 5
Contact Current (A)
250
n DIMENSIONS
l Dimensions JV-KT type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW)
Unit: mm
5
JV SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
l
l
l
l
l
l
Relays produced after the specific date code that is indicated on each data sheet are lRoHS-compliant now. Please refer to Lead-Free Status Info: (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. As of February 2005, Sn-3.0CuNi will be used for FTR-B3 and FTR-B4 series relays. Relays that are RoHS compliant do not contain the hazardous materials that are restricted by the RoHS directive. Hazardous materials are cadmium, lead, mercury, chromium VI, PBB, PBDE including pentaBDE and octaBDE (with a concentration level <0.1%). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) It has been verified that using lead-free relays in leaded assembly processes will not cause any problems (compatible). "JEDEC STANDARD" and "LF" is marked on each outer and inner carton. (No marking on individual relays. Please refer to Lead Free Label Info). To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
2. Recommended Lead Free Solder Profile
Reflow Solder condtion Flow Solder condtion:
Pre-heating: Soldering:
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
maximum 120C dip within 5 sec. at 260C soler bath
Solder by Soldering Iron:
Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys. SnAgCu and SnCuNi solder have a low risk of tin whisker. No considerable length whisker was found by our in-house tests. Each lead terminal will be changed from solder plating to Sn plating and Nickel plating. A layer of Nickel plating is between the terminal and Sn plating to avoid whisker.
4. Tin Whisker
l
5. Solid State Relays
l
6
JV SERIES
Fujitsu Components International Headquarter Offices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email:components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/
(c)2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. November 30, 2007
7

▲Up To Search▲

Price & Availability of JV-12S-KT

	To Download JV-12S-KT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .