View APTGF100A120T3WG_4664044.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APTGF100A120T3WG
Phase leg NPT IGBT Power Module
25 26 27 28 31
VCES = 1200V IC = 100A @ Tc = 80C
Application * Welding converters Features * Non Punch Through (NPT) Fast IGBT - Low voltage drop - Low tail current - Switching frequency up to 50 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - RBSOA and SCSOA rated * Kelvin emitter for easy drive * Very low stray inductance * High level of integration * Internal thermistor for temperature monitoring Benefits * Outstanding performance at high frequency operation * Direct mounting to heatsink (isolated package) * Low junction to case thermal resistance * Solderable terminals both for power and signal for easy PCB mounting * Low profile * Easy paralleling due to positive TC of VCEsat * RoHS compliant
4 3
13 14 15 16 NTC
8 7
18
19
20
22
32
28 27 26 25 29 30
23 22
20 19 18 16 15
31 32 2 3 4 7 8 10 11 12
14 13
Pins 25/26/27/28 must be shorted together Pins 13/14/15/16 must be shorted together Pins 18/19/20/22 must be shorted together
Absolute maximum ratings
Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Pulsed Collector Current Gate - Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area TC = 25C TC = 80C TC = 25C TC = 25C TJ = 150C Max ratings 1200 130 100 200 20 657 200A @ 1150V Unit V A V W
May, 2009 1-5 APTGF100A120T3WG - Rev 1
These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com
www.microsemi.com
APTGF100A120T3WG
All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics
Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter Saturation Voltage Gate Threshold Voltage Gate - Emitter Leakage Current Test Conditions VGE = 0V, VCE = 1200V Tj = 25C VGE =15V IC = 100A Tj = 125C VGE = VCE , IC = 4mA VGE = 20V, VCE = 0V Min Typ 3.2 3.9 5.5 Max 250 3.7 6.5 600 Unit A V V nA
4.5
Dynamic Characteristics
Symbol Characteristic Cies Coes Cres QG Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Isc Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Short Circuit data Test Conditions VGE = 0V VCE = 25V f = 1MHz VGE= 15V ; VCE=600V IC=100A Inductive Switching (25C) VGE = 15V VBus = 600V IC = 100A RG = 5.6 Inductive Switching (125C) VGE = 15V VBus = 600V IC = 100A RG = 5.6 VGE = 15V Tj = 125C VBus = 600V IC = 100A Tj = 125C RG = 5.6 VGE 15V ; VBus = 900V tp 10s ; Tj = 125C Min Typ 6.5 1 0.5 1.1 120 50 310 20 130 60 360 30 12 mJ 5 650 A Max Unit nF C
ns
ns
Reverse diode ratings and characteristics
Symbol Characteristic VRRM IRM IF VF
Maximum Peak Repetitive Reverse Voltage
Test Conditions Tj = 25C Tj = 125C Tc = 80C IF = 60A IF = 120A IF = 60A IF = 60A VR = 800V di/dt =200A/s
Min 1200
Typ
Max 100 500
Unit V A A
Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage
VR=1200V
60 2.5 3 1.8 265 350 560 2890 3
V
Tj = 125C Tj = 25C Tj = 125C Tj = 25C Tj = 125C
Qrr
Reverse Recovery Charge
nC
www.microsemi.com
2-5
APTGF100A120T3WG - Rev 1
trr
Reverse Recovery Time
ns
May, 2009
APTGF100A120T3WG
Thermal and package characteristics
Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight IGBT Diode 2500 -40 -40 -40 2.5 Min Typ Max 0.19 0.90 150 125 100 4.7 110 Unit C/W V C N.m g
RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz
To heatsink
M4
Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information).
Symbol R25 R25/R25 B25/85 B/B Characteristic Resistance @ 25C T25 = 298.15 K TC=100C
RT = R25 1 1 RT: Thermistor value at T exp B25 / 85 T - T 25
T: Thermistor temperature
Min
Typ 50 5 3952 4
Max
Unit k % K %
SP3 Package outline (dimensions in mm)
See application note 1901 - Mounting Instructions for SP3 Power Modules on www.microsemi.com
www.microsemi.com
3-5
APTGF100A120T3WG - Rev 1
1
12
May, 2009
17
28
APTGF100A120T3WG
Typical Performance Curve
Output Characteristics (VGE=15V) Output Characteristics 200 175
TJ=25C TJ = 125C VGE=20V VGE=12V VGE=15V
200 175 150
IC (A)
150 IC (A) 125 100 75
125 100 75 50 25 0 0 1 2 3 VCE (V) 4 5 6
TJ=125C
VGE=9V
50 25 0 0 1 2 3 4 VCE (V) 5 6
200 175 150
Transfert Characteristics 35 30 25 E (mJ)
TJ=125C
Energy losses vs Collector Current
VCE = 600V VGE = 15V RG = 5.6 TJ = 125C
Eon
125 IC (A) 100 75 50 25 0 5 6 7 8 9 10 11 12 VGE (V) Switching Energy Losses vs Gate Resistance 40 35 30 E (mJ) 25 20 15 10 5 0 0 10 20 30 40 Gate Resistance (ohms) 50
Eoff VCE = 600V VGE =15V IC = 100A TJ = 125C Eon TJ=25C
20 15 10 5 0 0 25 50 75 100 125 150 175 200 IC (A) Reverse Bias Safe Operating Area 250 200
Eoff
IC (A)
150 100 50 0 0 300 600 900 1200 1500 VCE (V)
VGE=15V TJ=125C RG=5.6
maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.2 Thermal Impedance (C/W) 0.9 0.16 0.12 0.08 0.04 0.7 0.5 0.3 0.1 0.05 0 0.00001 0.0001 0.001 Single Pulse 0.01 0.1 1 10
IGBT
rectangular Pulse Duration (Seconds)
www.microsemi.com
4-5
APTGF100A120T3WG - Rev 1
May, 2009
APTGF100A120T3WG
Operating Frequency vs Collector Current Fmax, Operating Frequency (kHz) 100 80
ZVS VCE=600V D=50% RG=5.6 TJ=125C TC=75C
Forward Characteristic of diode 120 100 80 IF (A)
TJ=125C
60 40
ZCS
60 40 20 0 0.00
TJ=25C
20 0 0
hard switching
20
40
60 IC (A)
80
100
120
0.50
1.00
1.50 2.00 VF (V)
2.50
3.00
maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 1 Thermal Impedance (C/W) 0.8 0.6 0.5 0.4 0.2 0.3 0.1 0.05 0 0.00001 0.0001 0.001 Single Pulse 0.01 0.1 1 10 0.9 0.7
Diode
rectangular Pulse Duration (Seconds)
Microsemi reserves the right to change, without notice, the specifications and information contained herein
Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. U.S and Foreign patents pending. All Rights Reserved.
www.microsemi.com
5-5
APTGF100A120T3WG - Rev 1
May, 2009

▲Up To Search▲

Price & Availability of APTGF100A120T3WG

	To Download APTGF100A120T3WG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .