 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LED DISPLAY LTP-14088KD-J DATA SHEET Rev 01 - Description RDR Original Spec NPPR Original Spec By Phanomkorn J. December 01, 2008 Phanomkorn J. December 19, 2008 SPEC. NO.: DATE : DS30-2008-0194 December 19, 2008 0 OF 5 REV. NO. : PAGE NO. : PART NO.: LTP-14088KD-J BNS-OD-C131/A4 PAGE: 0 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES 1.50 inch ( 37.0 mm) MATRIX HEIGHT LOW POWER REQUIREMENT SINGLE PLANE, WIDE VIEWING ANGLE SOLID STATE RELIABILITY 8 x8 ARRAY WITH X-Y SELECT COMPATIBLE WITH USASCII AND EBCDIC CODES STACKABLE HORIZONTALLY CATEGORIZED FOR LUMINOUS INTENSITY LEAD-FREE PACKAGE(ACCORDING TO RoHS) DESCRIPTION The LTP-14088KD-J is a 1.50 inch (37.0 mm) matrix height 8x8 dot matrix display. This device uses AS-AlInGaP Hyper Red LED chips (AlInGaP epi on GaAs substrate). The matrix display has a black face and white dot color. DEVICE PART NO. AlInGaP Hyper Red LTP-14088KD-J DESCRIPTION Anode Column Cathode Row PART NO.: LTP-14088KD-J BNS-OD-C131/A4 PAGE: 1 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters. Tolerances are 0.25 mm (0.01") unless otherwise noted. 2. Pin tip's shift tolerance is +/- 0.4 mm. 3. Foreign material on segment 10mils 4. Ink contamination (surface) 20mils 5. Bending1/100 6. Bubble in segment 10mils INTERNAL CIRCUIT DIAGRAM PART NO.: LTP-14088KD-J BNS-OD-C131/A4 PAGE: 2 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PIN CONNECTION NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTION CATHODE ROW 5 CATHODE ROW 7 ANODE COLUMN 2 ANODE COLUMN 3 CATHODE ROW 8 ANODE COLUMN 5 CATHODE ROW 6 CATHODE ROW 3 CATHODE ROW 1 ANODE COLUMN 4 ANODE COLUMN 6 CATHODE ROW 4 ANODE COLUMN 1 CATHODE ROW 2 ANODE COLUMN 7 ANODE COLUMN 8 PART NO.: LTP-14088KD-J BNS-OD-C131/A4 PAGE: 3 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING PARAMETER Average Power Dissipation Per Dot Peak Forward Current Per Dot ( Frequency 1Khz,18% duty cycle) Average Forward Current Per Dot Derating Linear From 25 Per Dot Reverse Voltage Per Segment Operating Temperature Range Storage Temperature Range MAXIMUM RATING 70 90 25 0.28 5 -35 to +105 -35 to +105 UNIT mW mA mA mA/ V Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C or of temperature unit (during assembly) not over max. temperature rating above. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio (Similar Light Area) SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV p d VF IR IV-m 1020 2475 650 20 639 2.1 2.3 2.6 2.8 100 2:1 cd nm nm nm V A Ip=32mA 1/16Duty IF=20mA IF=20mA IF=20mA IF=20mA IF=80mA VR=5V Ip=32mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L'Eclairage) eye-response curve. PART NO.: LTP-14088KD-J BNS-OD-C131/A4 PAGE: 4 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTP-14088KD-J BNS-OD-C131/A4 PAGE: 5 of 5 |
Price & Availability of LTP-14088KD-J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |