View MAX4610CD_4612304.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

19-4793; Rev 6; 5/09
Low-Voltage, Quad, SPST CMOS Analog Switches
General Description
The MAX4610/MAX4611/MAX4612 are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (100, max) is matched between switches to 4, max and is flat (4, max) over the specified signal range. Each switch handles V+ to GND analog signal levels. Maximum off-leakage current is only 1nA at TA = +25C and 2nA at TA = +85C. The MAX4610 has four normally open (NO) switches, and the MAX4611 has four normally closed (NC) switches. The MAX4612 has two NO switches and two NC switches. These CMOS switches operate from a single +2V to +12V supply. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using a single +5V supply.
____________________________Features
Offered in Automotive Temperature Range (-40C to +125C) Guaranteed On-Resistance 100 max (5V Supply) 46 max (12V Supply) Guaranteed Match Between Channels (4, max) Guaranteed Flatness Over Signal Range (18, max) Off-Leakage Current Over Temperature < 2nA at TA = +85C > 2kV ESD Protection per Method 3015.7 Rail-to-Rail Signal Handling TTL/CMOS-Logic Compatible
MAX4610/MAX4611/MAX4612
Ordering Information
PART MAX4610CUD+ TEMP RANGE 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -40C to +85C PIN-PACKAGE 14 TSSOP 14 Narrow SO 14 Plastic DIP Dice* 16 QFN-EP** 14 TSSOP 14 Narrow SO 14 Plastic DIP
________________________Applications
Battery-Operated Equipment Audio/Video Signal Routing Low-Voltage Data-Acquisition Systems Sample-and-Hold Circuits Communication Circuits
MAX4610CSD+ MAX4610CPD+ MAX4610C/D+ MAX4610EGE+ MAX4610EUD+ MAX4610ESD+ MAX4610EPD+
MAX4610ASD+ -40C to +125C 14 Narrow SO Ordering Information continued at end of data sheet. *Contact factory for dice specifications. **EP = Exposed pad. +Denotes a lead(Pb)-free/RoHS-compliant package.
Pin Configurations/Truth Tables
V+
N.C.
IN1 14
IN4
MAX4610 TOP VIEW
NO1 1 COM1 2 NO2 3 COM2 4 IN2 5 IN3 6 GND 7
+
14 V+ 13 IN1 12 IN4 11 NO4 10 COM4 9 COM3 8 NO3 INPUT LOW HIGH SWITCH STATE OFF ON
16
15
13
+
NO1 COM1 NO2 COM2 1 2 EP** 12 11 N.C. NO4 COM4 COM3
MAX4610
3 4 10 9
TSSOP/SO/DIP
5 IN2
6
IN3
7 GND
8
NO3
MAX4611/MAX4612 Pin Configurations/Truth Tables appear at end of data sheet.
**EP = EXPOSED PAD CONNECT EP TO V+
QFN
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Low-Voltage, Quad, SPST CMOS Analog Switches MAX4610/MAX4611/MAX4612
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND.) V+ ...........................................................................-0.3V to +13V IN_, COM_, NO_, NC_ (Note 1)....................-0.3V to (V+ + 0.3V) Continuous Current (any terminal) (pulsed at 1ms, 10% duty cycle) .....................................20mA Peak Current (any terminal) (pulsed at 1ms, 10% duty cycle) .....................................40mA ESD per Method 3015.7......................................................> 2kV Continuous Power Dissipation (TA = +70C) 14-Pin TSSOP (derate 6.3mW/C above +70C) ..........500mW 14-Pin Narrow SO (derate 8.00mW/C above +70C) ..640mW 14-Pin Plastic DIP (derate 10.00mW/C above +70C) ..800mW 16-Pin QFN (derate 18.5mW/C above +70C) ..........1481mW Operating Temperature Ranges MAX461_C_ _ ......................................................0C to +70C MAX461_E_ _....................................................-40C to +85C MAX461_A_ _ .................................................-40C to +125C Storage Temperature Range .............................-65C to +160C Lead Temperature (soldering, 10s) .................................+300C
Note 1: Signals on NO_, NC_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum current rating.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS--Single +5V Supply
(V+ = +5V 10%, VIN_H = 2.4V, VIN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range (Note 3) VCOM_, VNO_, VNC_ RON V+ = 4.5V, ICOM_ = 1mA, VNO_ = VNC_ = 3V V+ = 4.5V, ICOM_ = 1mA, VNO_ = VNC_ = 3V V+ = 4.5V; ICOM_ = 1mA; VNO_ = VNC_ = 3V, 2V, 1V V+ = 5.5V; VCOM_ = 1V, 4.5V; VNO_ = 4.5V, 1V TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = -40C to +85C TA = -40C to +125C TA = +25C TA = -40C to +85C TA = -40C to +125C -0.1 -2 -30 -0.1 -2 -30 -0.2 -4 -30 12 1.0 0 70 V+ 100 150 5 8 22 28 +0.1 +2 +30 +0.1 +2 +30 +0.2 +4 +30 nA nA nA V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
On-Resistance
On-Resistance Match Between Channels (Note 4)
RON
On-Resistance Flatness (Note 5)
RFLAT(ON)
NO_ or NC_ Off-Leakage Current (Note 6)
INO(OFF)
COM_ Off-Leakage Current (Note 6)
ICOM(OFF)
V+ = 5.5V; VCOM_ = 1V, 4.5V; VNO_ = VNC_ = 4.5V, 1V
COM_ On-Leakage Current (Note 6)
ICOM(ON)
TA = +25C V+ = 5.5V; VCOM_ = 1V, 4.5V; T = -40C to +85C VNO_ = VNC_ = 1V, 4.5V, A or floating TA = -40C to +125C
2
_______________________________________________________________________________________
Low-Voltage, Quad, SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS--Single +5V Supply (continued)
(V+ = +5V 10%, VIN_H = 2.4V, VIN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER LOGIC INPUT Input Current with InputVoltage High Input Current with InputVoltage Low Input High Voltage Input Low Voltage DYNAMIC (Note 3) Turn-On Time Turn-Off Time On-Channel Bandwidth Charge Injection Off-Isolation (Note 7) Crosstalk (Note 8) NO_ or NC_ Capacitance COM_ On-Capacitance Total Harmonic Distortion SUPPLY Power-Supply Range Supply Current I+ VIN = 0 or V+, all switches on or off 2 -1 0.001 12 +1 V A tON tOFF BW VCTE VISO VCT C(OFF) VCOM_ = 3V, Figure 2 VCOM_ = 3V, Figure 2 Signal = 0dBm, Figure 4, 50 in and out CL = 1.0nF, VGEN = 0, RGEN = 0, Figure 3 RL = 50, CL = 5pF, f = 1MHz, Figure 4 RL = 50, CL = 5pF, f = 1MHz, Figure 5 f = 1MHz, Figure 6 TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = +25C TA = +25C TA = +25C TA = +25C TA = +25C TA = +25C TA = +25C 300 1 -60 -80 16 16 23 0.009 5 15 35 65 90 28 30 ns ns MHz pC dB dB pF pF pF % IIN_H IIN_L VIN_H VIN_L VIN_ = 2.4V, all others = 0.8V VIN_ = 0.8V, all others = 2.4V -0.1 -0.1 2.4 0.001 0.001 1.5 1.4 0.8 +0.1 +0.1 A A V V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
MAX4610/MAX4611/MAX4612
COM_ Off-Capacitance CCOM(OFF) f = 1MHz, Figure 6 CCOM(ON) f = 1MHz, Figure 6 THD 600 IN and OUT, 20Hz to 20kHz, 2VP-P
_______________________________________________________________________________________
3
Low-Voltage, Quad, SPST CMOS Analog Switches MAX4610/MAX4611/MAX4612
ELECTRICAL CHARACTERISTICS--Single +3V Supply
(V+ = +3V, VIN_H = 2.4V, VIN_L = 0.5V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range (Note 3) VCOM_, VNO_, VNC_ V+ = 2.7V, ICOM_ = 1mA, VNO_ = VNC_ = 1V V+ = 2.7V, ICOM_ = 1mA, VNO_ = VNC_ = 1V V+ = 3.6V, VCOM_ = 0.5V, 3V; VNO_ = VNC_ = 3V, 0.5V V+ = 3.6V, VCOM_ = 0.5V, 3V; VNO_ = VNC_ = 3V, 0.5V V+ = 3.6V, VCOM_ = 0.5V, 3V; VNO_ = VNC_ = 0.5V, 3V, or floating TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = -40C to + 85C TA = -40C to + 125C TA =+25C TA = -40C to + 85C TA = -40C to + 125C TA = +25C TA = -40C to +85C TA = -40C to +125C -0.1 -2 -30 -0.1 -2 -30 -0.2 -4 -30 2.4 1.0 1.0 TA = +25C TA = -40C to +85C TA = -40C to +125C Turn-Off Time tOFF VCOM_ = 1.5V, Figure 2 TA = +25C TA = TMIN to TMAX 30 50 0.5 100 120 140 47 60 ns ns 2 0 V+ V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
175
360 450 10 20 +0.1 +2 +30 +0.1 +2 +30 +0.2 +4 +30 V V nA nA nA
On-Resistance
RON
On-Resistance Match Between Channels (Note 4)
RON
NO_ or NC_ Off-Leakage Current (Notes 3, 6)
INO(OFF)
COM_ Off-Leakage Current (Notes 3, 6)
ICOM(OFF)
COM_ On-Leakage Current (Notes 3, 6) LOGIC INPUTS Input High Voltage Input Low Voltage DYNAMIC (Note 3) Turn-On Time
ICOM(ON)
VIN_H VIN_L
tON
VCOM_ = 1.5V, Figure 2
4
_______________________________________________________________________________________
Low-Voltage, Quad, SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS--Single +12V Supply
(V+ = +12V, VIN_H = 4V, VIN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER ANALOG SWITCH Analog Signal Range (Note 3) VCOM_, VNO_, VNC_, RON V+ = 12V, ICOM = 2mA, VNO_ = VNC_ = 10V TA = +25C TA = TMIN to TMAX 4.0 2.8 2.5 VIN_ = 0 or V+, all switches on or off -1 0.001 0.8 +1 0 30 V+ 45 60 V SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS
MAX4610/MAX4611/MAX4612
On-Resistance LOGIC INPUTS Input High Voltage Input Low Voltage SUPPLY Positive Supply Current
VIN_H VIN_L I+
V V A
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 3: Guaranteed by design. Note 4: RON = RON (max) - RON (min). Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 6: Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25C. Note 7: Off-Isolation = 20log10 (VCOM_ / VNO_), VCOM_ = output, VNO_ = input to off switch. Note 8: Between any two switches.
_______________________________________________________________________________________
5
Low-Voltage, Quad, SPST CMOS Analog Switches MAX4610/MAX4611/MAX4612
__________________________________________Typical Operating Characteristics
(TA = +25C, unless otherwise noted.)
ON-RESISTANCE vs. VCOM
MAX4610-1A
ON-RESISTANCE vs. VCOM
MAX4610-1B
ON-RESISTANCE vs. VCOM AND TEMPERATURE
V+ = +5V 80 TA = +85C 70 RON () 60 50 TA = +25C
MAX4610 toc02
80 70 V+ = +5V 60 RON ()
400 350 300 RON () 250 200 150 V+ = +3V V+ = +2V
90
50 40 30 V+ = +12V 20 0 2 4 6 VCOM (V) 8 10 12 V+ = +9V
100 50 0 1 2 3 VCOM (V) 4
40 V+ = +5V 30 5 6 0
TA = -40C
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VCOM (V)
OFF-LEAKAGE vs. TEMPERATURE
MAX4610-03
ON-LEAKAGE vs. TEMPERATURE
MAX4610-04
SUPPLY CURRENT vs. TEMPERATURE
V+ = +5V 1
MAX4610-05
100 V+ = +5V VCOM_ = 0 VNO_ OR VNC_ = +4.5V OFF-LEAKAGE (pA) 10
1000 V+ = +5V VCOM_ = 0 VNO_ OR VNC_ = FLOATING
10
100 ON-LEAKAGE (pA)
10 I+ (pA) -40 -20 0 20 40 60 80 100 0.1
1
1
0.1
0.01
0.1 -40 -20 0 20 40 60 80 100 TEMPERATURE (C)
0.01 TEMPERATURE (C)
0.001 -40 -20 0 20 40 60 80 100 TEMPERATURE (C)
CHARGE INJECTION vs. VCOM
MAX4610 toc06
FREQUENCY RESPONSE
0 -10 -20 -30 GAIN (dB) -40 -50 -60 -70 -80 OFF-ISOLATION PHASE
MAX4610 toc07
TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY
144 108 PHASE (DEGREES) 72 36 0 -36 -72 -108 -144 0.1 THD + N (%) V+ = +2V, 1Vp-p SIGNAL 600 IN AND OUT
MAX4610-08
6 5 CHARGE INJECTION (pC) 4 3 V+ = +12V 2 1 0 -1 0 2 4 6 VCOM_ (V) 8 10 V+ = +5V
LOSS
180
1
0.01
V+ = +3V, 1Vp-p SIGNAL V+ = +5V, 2Vp-p SIGNAL
-90 -100 12 1k 10k 100k 1M 10M FREQUENCY (Hz)
-180 100M 500M
0.001 10 100 1k 10k 100k 1M FREQUENCY (Hz)
6
_______________________________________________________________________________________
Low-Voltage, Quad, SPST CMOS Analog Switches
Pin Description
PIN MAX4610 TSSOP/SO/ DIP 1, 3, 8, 11 -- -- -- 2, 4, 9, 10 13, 5, 6, 12 7 -- QFN 1, 3, 8, 11 -- -- -- 2, 4, 9, 10 14, 5, 6, 13 7 12, 15 MAX4611 TSSOP/SO/DIP -- 1, 3, 8, 11 -- -- 2, 4, 9, 10 13, 5, 6, 12 7 -- QFN -- 1, 3, 8, 11 -- -- 2, 4, 9, 10 14, 5, 6, 13 7 12, 15 MAX4612 TSSOP/SO/DIP -- -- 1, 8 3, 11 2, 4, 9, 10 13, 5, 6, 12 7 -- QFN -- -- 1, 8 3, 11 2, 4, 9, 10 14, 5, 6, 13 7 12, 15 NO1-NO4 NC1-NC4 NO1, NO3 NC2, NC4 COM1-COM4 IN1-IN4 GND N.C. Analog Switch Normally Open Terminals Analog Switch Normally Closed Terminals Analog Switch Normally Open Terminals Analog Switch Normally Closed Terminals Analog Switch Common Terminals Logic-Control Digital Input Ground. Connect to digital ground. No Connection. Not internally connected. Positive Analog and DigitalSupply Voltage Input. Internally connected to substrate. Exposed Pad (QFN only). Connect to V+. NAME FUNCTION
MAX4610/MAX4611/MAX4612
14
16
14
16
14
16
V+
--
--
--
--
--
--
EP
Applications Information
Power-Supply Sequencing and Overvoltage Protection
Do not exceed the absolute maximum ratings, because stresses beyond the listed ratings may cause permanent damage to the devices. Proper power-supply sequencing is recommended for all CMOS devices. Always apply V+ before applying analog signals or logic inputs, especially if the analog or logic signals are not current limited. If this sequencing is not possible, and if the analog or logic inputs are not current limited to 20mA, add a small-signal diode (D1) as shown in Figure 1. If the analog signal can dip below GND, add D2. Adding protection diodes reduces the analog signal range to a diode drop (about 0.7V) below V+ (for D1), and to a diode drop above ground (for D2). Leakage is unaffected by adding the diodes. On-resistance increases by a small amount at low supply voltages. Maximum supply voltage (V+) must not exceed 13V. Adding protection diodes causes the logic thresholds to be shifted relative to the power-supply rails. This can be
POSITIVE SUPPLY
V+
MAX4610 MAX4611 MAX4612
COM_
NO_
Vg
Figure 1. Overvoltage Protection Using Two External Blocking Diodes
significant when low supply voltages (+5V or less) are used. With a +5V supply, TTL compatibility is not guaranteed when protection diodes are added. Driving IN1 and IN2 all the way to the supply rails (i.e., to a diode drop higher than the V+ pin, or to a diode drop lower than the GND pin) is always acceptable.
7
_______________________________________________________________________________________
Low-Voltage, Quad, SPST CMOS Analog Switches MAX4610/MAX4611/MAX4612
Protection diodes D1 and D2 also protect against some overvoltage situations. With Figure 1's circuit, if the supply voltage is below the absolute maximum rating, and if a fault voltage up to the absolute maximum rating is applied to an analog signal pin, no damage will result. single-supply operation with some precautions. The absolute maximum rating for V+ is +13.2V (referenced to GND). When operating near this region, bypass V+ with a minimum 0.1F capacitor to ground as close to the IC as possible. Caution: The absolute maximum V+ to V- differential voltage is 13.0V. Typical 6V or 12V supplies with 10% tolerances can be as high as 13.2V. This voltage can damage the MAX4610/MAX4611/MAX4612. Even 5% tolerance supplies may have overshoot or noise spikes that exceed 13.0V.
Operating Considerations for High-Voltage Supply
The MAX4610/MAX4611/MAX4612 are pin-compatible with the industry-standard 74HC4066 and the MAX4066, and are optimized for +5V single-supply operation. The MAX4610 family is capable of +12V
______________________________________________Test Circuits/Timing Diagrams
MAX4610 MAX4611 MAX4612
V COM _ SWITCH INPUT
V+ V+ COM_ NO_, NC_ RL 300 SWITCH OUTPUT VOUT CL 35pF LOGIC INPUT VINH 50% 0V 50% t R < 20ns t F < 20ns
IN_ LOGIC INPUT GND
t OFF VOUT SWITCH OUTPUT 0V t ON
0.9 * V0UT
0.9 * VOUT
VOUT = VCOM
CL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL RL + RON
(
)
Figure 2. Switching Time
MAX4610 MAX4611 MAX4612
RGEN COM_
V+ V+ VOUT NO_, NC_ CL GND IN_ ON Q = (V OUT )(C L ) VOUT
VOUT
V GEN
IN VIN
OFF
OFF
Figure 3. Charge Injection
8 _______________________________________________________________________________________
Low-Voltage, Quad, SPST CMOS Analog Switches
Test Circuits/Timing Diagrams (continued)
MAX4610/MAX4611/MAX4612
10nF SIGNAL GENERATOR 0dBm
V+
MAX4610 MAX4611 MAX4612
SIGNAL GENERATOR 0dBm VIN_L OR VIN_H
10nF
V+
MAX4610 MAX4611 MAX4612
NO1 IN2 50
V+ COM_
V+ COM1 IN1
IN_ ANALYZER RL NO_, NC_ GND
VINL OR VINH ANALYZER RL
VINL OR VINH
NO2 GND
COM2
Figure 4. Off-Isolation/On-Channel Bandwidth
Figure 5. Crosstalk
Ordering Information (continued)
10nF V+
MAX4610 MAX4611 MAX4612
PART MAX4611CUD+ MAX4611CSD+ MAX4611CPD+ MAX4611C/D+ MAX4611EGE+
TEMP RANGE 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C 0C to +70C 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +125C -40C to +125C
PIN-PACKAGE 14 TSSOP 14 Narrow SO 14 Plastic DIP Dice* 16 QFN-EP** 14 TSSOP 14 Narrow SO 14 Plastic DIP 14 TSSOP 14 Narrow SO 14 TSSOP 14 Narrow SO 14 Plastic DIP Dice* 14 TSSOP 14 Narrow SO 16 QFN-EP** 14 Plastic DIP 14 TSSOP 14 Narrow SO
V+ COM_
IN_ CAPACITANCE METER NO_, NC_ f = 1MHz GND
VINL OR VINH
MAX4611EUD+ MAX4611ESD+ MAX4611EPD+ MAX4611AUD+ MAX4611ASD+ MAX4612CUD+ MAX4612CSD+
Figure 6. Channel Off/On-Capacitance
MAX4612CPD+ MAX4612C/D+ MAX4612EUD+ MAX4612ESD+ MAX4612EGE+ MAX4612EPD+ MAX4612AUD+ MAX4612ASD+
*Contact factory for dice specifications. **EP = Exposed pad. +Denotes a lead(Pb)-free/RoHS-compliant package. _______________________________________________________________________________________ 9
Low-Voltage, Quad, SPST CMOS Analog Switches MAX4610/MAX4611/MAX4612
Pin Configurations/Truth Tables (continued)
V+
N.C.
IN1 14
IN4
MAX4611 TOP VIEW
NC1 1 COM1 2 NC2 3 COM2 4 IN2 5 IN3 6 GND 7 + 14 V+ 13 IN1 12 IN4 11 NC4 10 COM4 9 COM3 8 NC3 INPUT LOW HIGH SWITCH STATE ON OFF
+
16
15
13 N.C. NC4 COM4 COM3
NC1 COM1 NC2 COM2
1 2
EP**
12 11
MAX4611
3 4 10 9
TSSOP/SO/DIP
5 IN2
6
IN3
7 GND QFN
8
NC3
**EP = EXPOSED PAD, CONNECT EP TO V+
V+
N.C.
IN1 14
IN4
MAX4612 TOP VIEW
NO1 1 COM1 2 NO2 3 COM2 4 IN2 5 IN3 6 GND 7 + 14 V+ 13 IN1 12 IN4 11 NC4 10 COM4 9 COM3 8 NC3 INPUT LOW HIGH NO1, NO2 OFF ON NC3, NC4 ON OFF
+
16 EP**
15
13 N.C. NC4 COM4 COM3
NO1 COM1 NC2 COM2
1 2
12 11
MAX4612
3 4 10 9
TSSOP/SO/DIP
5 IN2
6
IN3
7 GND QFN
8
NO3
**EP = EXPOSED PAD, CONNECT EP TO V+
Package Information
For the latest package outline information, go to www.maxim-ic.com/packages. PACKAGE TYPE 14 TSSOP 14 Narrow SO 14 PDIP 16 QFN PACKAGE CODE U14+1 S14+2 P14+6 G1644-1 DOCUMENT NO. 21-0066 21-0041 21-0043 21-0091
10
______________________________________________________________________________________
Low-Voltage, Quad, SPST CMOS Analog Switches
Revision History
REVISION NUMBER 0 6 REVISION DATE 1/99 5/09 DESCRIPTION --- Added lead-free packaging and added changes to EC table PAGES CHANGED -- 1-4, 7, 9-13
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11
(c) 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.

▲Up To Search▲

Price & Availability of MAX4610CD

	To Download MAX4610CD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .