|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1.25mm Pitch Super Low profile Crimping Connector DF14 Series sFeatures 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height: 2.5mm A signal can be fetched from the area where there is no board to board space. (Refer to fig.1) Offset type is available. Board mounting height: 1.6mm (Refer to fig.2) Board Mounting Figure 2. Correspond to Automatic Mounting The header has the vacuum mount face which enables the vacuum absorption and the automatic mounting by the embossed tape packaging.In addition, the tube packaging can be selected. 3. Four Wall Type Without Friction to Board by Socket The header has the box structure to prevent from being twisted and has the perfect mis-insertion prevention method. Moreover the header has the wall on the board side and doesn't have any trouble resulted from the friction to board by socket. In addition, the metal fitting is attached to prevent the solder peel. fig.1 DF14(A) Board Mounting Figure (7.3) (1) (1.6) sApplications LCD, Note PC, Mobile Terminal Small business equipment, Video camera DF14H B234 (2.4) fig.2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your HiroseConnector DF14 Seriesq1.25mm Pitch Super Low profile Crimping sales representative. sProduct Specifications Rating Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 5. Vibration 500M ohms Min No flashover or insulation breakdown. 30m ohms Max No electrical discontinuity of 1s or more Current rating 1A Operating Temperature Range -35 to +85c (Note 1) Storage Temperature Range -10 to +60c (Note 2) 40 to 80% Storage Moisture Range Condition 100V DC 500V AC/1 minute 100mA Measure at the square steel pin of 0.30.002mm Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-25c: 30 minutes5 to 35c: 10 minutes85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles Tin plating: 30 cycles Gold plating: 50 cycles Reflow: At the recommended temperature profile Manual soldering: 300c for 3 seconds 40 to 70% (Note 2) Voltage rating 150V AC Operating Moisture Range Specification 4. Insertion/Extraction Force MIN0.15N (15gf), MAX3N (300gf) 6. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min 7. Temperature Cycle Contact resistance: 30m ohms Max Insulation resistance: 500M ohms Min 8. Durability (Mating/un-mating) Contact resistance: 30m ohms Max 9. Resistance to Soldering heat No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. sMaterial Product Crimping Socket Crimping Contact for Socket Pin Header Part Insulator Contact Insulator Contact Fitting Material Polyamide Phosphor Copper Polyamide Brass Phosphor copper Finish Beige Tin-copper plated or gold plated Beige Tin-copper plated or gold plated Tin-copper plated Remarks UL94V-0 ------- UL94V-0 ------- ------- sOrdering Information qConnector DF 14 # - * S - 1.25 C 1 1 2 Series Name: DF14 Blank: Standard, with boss A: on-board, without boss H: offset 2 3 4 4 5 Connector Type 6 S: Single row socket P: Single row pin header 5 6 Contact Pitch: 1.25mm Contact Type C: Crimping socket H: Right angle SMT 3 Number of Contacts: 2 to 10, 15, 20, 25, 30 qContact DF14 - 2628 SCF A 1 1 Applicable cable size 2628: AWG26 to 28 3032: AWG30 to 32 2 2 3 3 Packaging Type SCF: Socket contact/reel Plating Type Blank: Tin plated A: Gold plated B235 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinuedprofile Crimping products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF14 Seriesq1.25mm Pitch Super Low soon. Please check the Connector sCrimping Socket Photo: Contact insertion state Unit: mm Part Number DF14- 2S-1.25C DF14- 3S-1.25C DF14- 4S-1.25C DF14- 5S-1.25C DF14- 6S-1.25C DF14- 7S-1.25C DF14- 8S-1.25C DF14- 9S-1.25C DF14-10S-1.25C DF14-15S-1.25C DF14-20S-1.25C DF14-25S-1.25C DF14-30S-1.25C CL No. 538-0005-8 538-0006-0 538-0007-3 538-0008-6 538-0009-9 538-0010-8 538-0011-0 538-0013-6 538-0014-9 538-0054-3 538-0059-7 538-0064-7 538-0012-3 Number of Contacts 2 3 4 5 6 7 8 9 10 15 20 25 30 A 4.45 5.70 6.95 8.20 9.45 10.70 11.95 13.20 14.45 20.70 26.95 33.20 39.45 B 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 17.50 23.75 30.00 36.25 RoHS Yes Note 1.The quantity is delivered per bag(100 pcs). If needed, please order the products per bag. sSocket Crimping Contact Part Number DF14-2628SCF DF14-3032SCF DF14-2628SCFA DF14-3032SCFA CL No. 538-0001-7-** 538-0003-2-** 538-0002-0-** 538-0004-5-** Packaging Type Reel Reel Reel Reel Quantity Finish Tin plated 10,000 Gold plated Yes RoHS KApplicable Cable (Tin plating Annealed copper wire) Conductor Size (Wire construction) AWG26(7 cores/0.16mm) AWG28(7 cores/0.127mm) AWG30(7 cores/0.1mm) AWG32(7 cores/0.08mm) Jacket Diameter KRecommended Cable UL1571 O0.54 to O1mm KStrip Length 1.2 to 1.9mm Note:If other cables are used instead of the applicable cable, contact Hirose sales department. BApplicable Crimping Tool Type Applicator Press Main Unit Manual Crimping Tool Part Number AP105-DF14-2628S AP105-DF14-3032S CM-105 DF14-2628/CR-HT DF14-3032/CR-HT CL No. 901-4548-1 901-4544-0 901-0005-4 550-0261-1 550-0262-4 Applicable Contact DF14-2628SCF/SCFA DF14-3032SCF/SCFA --------------------------------------------DF14-2628SCF/SCFA DF14-3032SCF/SCFA Note 1.If a trouble has occurred due to tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2.Use the reel contact sequentially cut for manual crimping tool. B236 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your HiroseConnector DF14 Seriesq1.25mm Pitch Super Low profile Crimping sales representative. sRight Angle Pin Header (SMT) Note 1."Without boss" indicates the style with no boss. BPCB mounting pattern BTube Packaging Dimensions Note 2."Without boss" indicates that no hole is needed. [Specific No.]-**,(**) (25): Tin-copper plated tube packaging (26): Tin-copper plated embossed tape packaging (55): Gold plated tube packaging (56): Gold plated embossed tape packaging Unit: mm With boss Part Number DF14- 2P-1.25H(**) DF14- 3P-1.25H(**) DF14- 4P-1.25H(**) DF14- 5P-1.25H(**) DF14- 6P-1.25H(**) DF14- 7P-1.25H(**) DF14- 8P-1.25H(**) DF14- 9P-1.25H(**) DF14-10P-1.25H(**) DF14-15P-1.25H(**) DF14-20P-1.25H(**) DF14-25P-1.25H(**) DF14-30P-1.25H(**) CL No. Without boss Part Number CL No. Number of Contacts 2 3 4 5 6 7 8 9 10 15 20 25 30 A 7.45 8.70 9.95 11.20 12.45 13.70 14.95 16.20 17.45 23.70 29.95 36.20 42.45 B 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 17.50 23.75 30.00 36.25 C 6.45 7.70 8.95 10.20 11.45 12.70 13.95 15.20 16.45 22.70 28.95 35.20 41.45 D 8.05 9.30 10.55 11.80 13.05 14.30 15.55 16.80 18.05 24.30 30.55 36.80 43.05 Tube Packaging Quantity 66 56 49 44 39 36 32 30 28 20 16 13 11 RoHS 538-0021-4-** DF14A- 2P-1.25H(**) 538-0033-3-** 538-0022-7-** DF14A- 3P-1.25H(**) 538-0034-6-** 538-0023-0-** DF14A- 4P-1.25H(**) 538-0035-9-** 538-0024-2-** DF14A- 5P-1.25H(**) 538-0036-1-** 538-0025-5-** DF14A- 6P-1.25H(**) 538-0037-4-** 538-0026-8-** DF14A- 7P-1.25H(**) 538-0038-7-** 538-0027-0-** DF14A- 8P-1.25H(**) 538-0039-0-** 538-0028-3-** DF14A- 9P-1.25H(**) 538-0040-9-** 538-0029-6-** DF14A-10P-1.25H(**) 538-0041-1-** 538-0084-4-** DF14A-15P-1.25H(**) 538-0114-3-** 538-0089-8-** DF14A-20P-1.25H(**) 538-0119-7-** 538-0094-8-** DF14A-25P-1.25H(**) 538-0124-7-** 538-0020-1-** DF14A-30P-1.25H(**) 538-0045-2-** Yes Note 1.Please order the tube packaging product, multiplying the packaging quantity (pcs.). Note 2.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel) B237 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinuedprofile Crimping products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF14 Seriesq1.25mm Pitch Super Low soon. Please check the Connector sRight Angle Pin Header (Offset, SMT) Contact No. 1 1.6 A P=1.25 0.3 5.7 B C 2.4 BPCB mounting pattern (0.5) 1.40.1 (0.4) D +0.2 0 A0.05 P=1.250.05 0.70.05 0.8 (0.5) 6.70.1 (0.3) 3.60.1 [Specific No.]-**,(**) (56): Gold plated embossed tape packaging 1.3 +0.2 0 Unit: mm Part Number DF14H-02P-1.25H(**) DF14H-20P-1.25H(**) DF14H-30P-1.25H(**) CL No. 538-0177-3-** 538-0167-0-** 538-0188-0-** Number of Contacts 2 30 30 A 1.25 23.75 36.25 B 6.8 29.3 41.8 C 10.1 32.6 45.1 D 7.2 29.7 42.2 RoHS Yes Note 1.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel) B238 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your HiroseConnector DF14 Seriesq1.25mm Pitch Super Low profile Crimping sales representative. BEmbossed Carrier Tape Dimensions (JIS-C-0806) s 2 to 10 Contacts s 15, 20, 25, 30 Contacts Unit: mm Inserted Connector DF14/14A- 2P-1.25H DF14/14A- 3P-1.25H DF14/14A- 4P-1.25H DF14/14A- 5P-1.25H DF14/14A- 6P-1.25H DF14/14A- 7P-1.25H DF14/14A- 8P-1.25H DF14/14A- 9P-1.25H DF14/14A-10P-1.25H DF14/14A-15P-1.25H DF14/14A-20P-1.25H DF14/14A-25P-1.25H DF14/14A-30P-1.25H Number of Contacts 2 3 4 5 6 7 8 9 10 15 20 25 30 A 16 16 24 24 24 24 24 24 24 44 44 56 56 B 7.5 7.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 20.2 20.2 26.2 26.2 C 16.4 16.4 24.4 24.4 24.4 24.4 24.4 24.4 24.4 44.4 44.4 56.4 56.4 D -- - -- - -- - -- - -- - -- - -- - -- - -- - 40.4 40.4 52.4 52.4 B239 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinuedprofile Crimping products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF14 Seriesq1.25mm Pitch Super Low soon. Please check the Connector BEmbossed Carrier Tape Dimensions (JIS-C-0806) DF14H-*P- 1.25H s 2 Contacts 20.1 +0 0 .1 s 20, 30 Contacts 1.750.1 .5 B O1 B0.1 A0.3 O1 0.30.1 .5 + (3) 40.1 0 0 .1 40.1 120.1 B--B 20.1 120.1 1.750.1 (3) 0.30.1 B0.1 C C B Unreeling direction C--C Unreeling direction 3 20.5 Product name label 0.5 O1.5 Lead hole depth A O1 O21 0.8 O3302 (O80) C +2 0 (C+6)MAX Unit: mm Inserted Connector DF14H- 2P-1.25H DF14H- 20P-1.25H DF14H- 30P-1.25H Number of Contacts 2 20 30 A 24 44 56 B 11.5 20.2 26.2 C 24.4 44.4 56.4 D -- - 40.4 52.4 B240 D0.1 A0.3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your HiroseConnector DF14 Seriesq1.25mm Pitch Super Low profile Crimping sales representative. BPrecautions 1. Recommended Temperature Profile (SMT) Temperature 250c Max. 240 220 10s max. IR reflow condition Preheating area 150c for 60 to 120 seconds Soldering area 250 for 10 seconds max. 220c min. 60 seconds max. 200c 60s max. Soldering 60 to 120s Preheating 150c 100c Time Note 1.Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2.The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. Manual soldering: 290c for 2 seconds 0.15 to 0.2mm Max 0.03mm at the connector center area, based on both connector edges Refer to Nylon Connector Use Hand book. Refer to Nylon Connector Use Hand book. sBe careful to carry out the crimping operation according to the "Crimping Condition Sheet" and "Crimping Quality Reference", because the crimping contact style is too small. Refer to Nylon Connector Use Hand book. sBe careful for an excessive scoop insertion/extraction, which will cause damage to the product. 2. Recommended Manual Soldering Condition (SMT) 3. Recommended Screen Thickness (SMT) 4. Board Sled (SMT) 5. Cleaning Condition 6. Connection Condition 7. Precautions 8. Cautions BPrecautions Precautions at Time of Insertion Handling Method: Lightly grasping the base of the cable, press the connector with your finger and insert it. Precautions at Time of Disconnection Handling Method: Grasp the cable so that the entire cable is pulled evenly and pull it out. Insertion Angle [Caution] Do not insert at an angle of 30 or greater. Doing so will cause contact deformation or case damage. Method: Insert with the connector parallel. Angle of Removal [Caution] Do not remove at an angle of 30 or greater. Doing so will cause contact deformation or case damage. Method: Remove with the connector parallel. Parallel Diagonal Parallel Diagonal Parallel Diagonal Parallel Diagonal B241 |
Price & Availability of DF14-3032SCF |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |