 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EMH15 / IMH15A Transistors General purpose (dual digital transistors) EMH15 / IMH15A Features 1) Two DTC144T chips in a EMT or SMT package. Dimensions (Unit : mm) IMH15A Equivalent circuit EMH15 (6) (5) (4) IMH15A (4) (5) (6) R1 R1 R1 (1) (2) (3) (3) R1 (2) (1) ROHM : SMT6 EIAJ : SC-74 Each lead has same dimensions Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature EMH15 IMH15A Symbol VCBO VCEO VEBO IC Pc Tj Tstg Limits 50 50 5 100 150(TOTAL) 300(TOTAL) 150 -55 to +150 Unit V V V mA mW EMH15 C C Each lead has same dimensions Package, marking, and packaging specifications Type Package Marking Code Basic ordering unit (pieces) EMH15 EMT6 H15 T2R 8000 IMH15A SMT6 H15 T110 3000 Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Input resistance Transition frequency of the device. Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT R1 Min. 50 50 5 - - - 100 - 32.9 Typ. - - - - - - 250 250 47 Max. - - - 0.5 0.5 0.3 600 - 61.1 Unit V V V A A V - MHz k IC=50A IC=1mA IE=50A VCB=50V VEB=4V Conditions IC/IB=10mA/1mA VCE/IC=5V/1mA VCE=10V, IE= -5mA, f=100MHz - Rev.B 1/2 EMH15 / IMH15A Transistors Electrical characteristics curves VCE=5V COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 1k 500 DC CURRENT GAIN : hFE 1 500m 200m 100m 50m 20m 10m 5m 2m 1m 100 200 500 1m 2m Ta=100C 25C -40C lC/lB=10 200 100 50 20 10 5 2 1 100 200 500 1m 2m 5m 10m 20m 50m 100m Ta=100C 25C -40C 5m 10m 20m 50m 100m COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) Fig.1 DC current gain vs. collector current Fig.2 Collector-emitter saturation voltage vs. collector current Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0 |
Price & Availability of EMH151
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |