View DTSPU60-105-1_4580448.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DTSPU60 Series
Rev A 60 Watt Single Output AC/DC Desktop Power Supply
FEATURES
Splash Proof 2 Year Warranty Class I Insulation IEC-320-C14 Input Inlet Optional Output Connector Wide Input Voltage 90 to 264VAC, 47~63Hz Output Voltage Protection (Crowbar Design) Output Voltage Available from 3VDC thru 50VDC
SPECIFICATIONS: DTSPU60 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max
INPUT (Vin) Operating Voltage Range Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Output Current Range *Ripple & Noise (peak to peak) Transient Response Hold-Up Time PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient PHYSICAL Weight Dimensions Warranty SAFETY EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25C, Cool Start, Vin = 115VAC Io = Full Load, 25C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC 12 26 0.5 1 264 63 1.6 1.0 15 30 0.75 2
Unit
VAC Hz A A A A mA s VDC % % W A % ms ms % % % VDC VDC M
0.3
Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC
See Rating Chart 3 7 0.5 1 0 60 See Rating Chart 0.5 1 4 16 112 110 132 150 83 88
Io = Full Load, Vin = 230VAC Primary to Secondary Primary to Ground Test Voltage = 500VDC Derate linearly from 100% Load at 40C to 50% load at 70C All Outputs
70 4242 2121 50 0 -40 5 -0.04
+70 +85 95 +0.04
C C % %/C grams inches years Class Class
Approximately 340 4.65 x 2.05 x 1.36 2 Vin = 220VAC Vin = 110VAC B B
*Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
DTSPU60 Series
Rev A 60 Watt Single Output AC/DC Desktop Power Supply
OUTPUT VOLTAGE / CURRENT RATING CHART
Model Number DTSPU60-101 DTSPU60-102 DTSPU60-103 DTSPU60-104 DTSPU60-105 DTSPU60-105-1 *DTSPU60-106 *DTSPU60-107 *DTSPU60-108 *DTSPU60-109 *DTSPU60-110 *DTSPU60-111 Preset Voltage 3 VDC 5 VDC 6 VDC 8 VDC 11 VDC 12 VDC 13 VDC 16 VDC 21 VDC 27 VDC 33 VDC 40 VDC Output Voltage Range 3 ~ 5 VDC 5 ~ 6 VDC 6 ~ 8 VDC 8 ~ 11 VDC 11 ~ 13 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC Output Current 6.60 ~ 4.00 A 6.00 ~ 5.00 A 5.83 ~ 4.37 A 5.00 ~ 3.63 A 4.54 ~ 3.84 A 5.45 ~ 4.61 4.23 ~ 3.43 A 3.75 ~ 2.85 A 2.85 ~ 2.22 A 2.22 ~ 1.81 A 1.81 ~ 1.50 A 1.50 ~ 1.20 A Total Regulation 7% 5% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% Maximum Output Power 20W 30W 35W 40W 50W 60W 55W 60W 60W 60W 60W 60W
NOTES
1. The asterisk " * " next to the model number indicates PSE approval. 2. The output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 3. Models with output voltages from 15VDC ~ 30VDC have been approved by TUV/PSE. Models with output voltages from 30VDC ~ 50VDC have been approved by JET/PSE. 4. Optional output connectors are available (see "DC Output Plug Selector List" link located at the bottom of the "Desktop" category page). Please call factory for ordering details.
DERATING CURVE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
DTSPU60 Series
Rev A 60 Watt Single Output AC/DC Desktop Power Supply
MECHANICAL DRAWING
Unit: inches [mm]
NOTES
1. Dimensions are shown in inches [mm] 2. Weight: Approximately 265 ~ 280 grams. 3. Optional output connectors available: ("DC Output Plug Selector List")
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797

▲Up To Search▲

Price & Availability of DTSPU60-105-1

	To Download DTSPU60-105-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .