View APT43F60B2_4582443.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APT43F60B2 APT43F60L
600V, 45A, 0.15 Max, trr 270ns
N-Channel FREDFET
Power MOS 8TM is a high speed, high voltage N-channel switch-mode power MOSFET. This 'FREDFET' version has a drain-source (body) diode that has been optimized for high reliability in ZVS phase shifted bridge and other circuits through reduced trr, soft recovery, and high recovery dv/dt capability. Low gate charge, high gain, and a greatly reduced ratio of Crss/Ciss result in excellent noise immunity and low switching loss. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control di/dt during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency.
T-Max(R)
TO-264
APT43F60B2
APT43F60L
D
Single die FREDFET
G S
FEATURES
* Fast switching with low EMI * Low trr for high reliability * Ultra low Crss for improved noise immunity * Low gate charge * Avalanche energy rated * RoHS compliant
TYPICAL APPLICATIONS
* ZVS phase shifted and other full bridge * Half bridge * PFC and other boost converter * Buck converter * Single and two switch forward * Flyback
Absolute Maximum Ratings
Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25C Continuous Drain Current @ TC = 100C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy
2 1
Ratings 45 28 160 30 1200 21
Unit
A
V mJ A
Avalanche Current, Repetitive or Non-Repetitive
Thermal and Mechanical Characteristics
Symbol PD RJC RCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) 0.22 Package Weight 6.2 10 Torque Mounting Torque ( TO-264 Package), 4-40 or M3 screw 1.1 MicrosemiWebsite-http://www.microsemi.com N*m -55 0.11 150 C 300 oz g in*lbf
04-2009 050-8151 Rev C
Min
Typ
Max 780 0.16
Unit W C/W
Static Characteristics
Symbol
VBR(DSS) VBR(DSS)/TJ RDS(on) VGS(th) VGS(th)/TJ IDSS IGSS
TJ = 25C unless otherwise specified
Test Conditions
VGS = 0V, ID = 250A Reference to 25C, ID = 250A VGS = 10V, ID = 21A VGS = VDS, ID = 2.5mA VDS = 600V VGS = 0V TJ = 25C TJ = 125C
APT43F60B2_L
Typ 0.57 0.12 4 -10 Max Unit V V/C V mV/C A nA
Parameter
Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance
3
Min 600
Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current
2.5
0.15 5 250 1000 100
VGS = 30V
Dynamic Characteristics
Symbol
gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf
4
TJ = 25C unless otherwise specified
Test Conditions
VDS = 50V, ID = 21A VGS = 0V, VDS = 25V f = 1MHz
Parameter
Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related
Min
Typ 42 8590 90 800 420
Max
Unit S
pF
VGS = 0V, VDS = 0V to 400V
5
Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time
VGS = 0 to 10V, ID = 21A, VDS = 300V Resistive Switching VDD = 400V, ID = 21A RG = 4.7 6 , VGG = 15V
220 215 45 90 48 55 145 44
nC
ns
Source-Drain Diode Characteristics
Symbol
IS ISM VSD trr Qrr Irrm dv/dt
Parameter
Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Peak Recovery dv/dt
Test Conditions
MOSFET symbol showing the integral reverse p-n junction diode (body diode)
Min
D
Typ
Max 45
Unit
G S
TJ = 25C TJ = 125C
A 160 1.0 270 500 1.14 2.91 9.6 13.8 20 V ns C A V/ns
ISD = 21A, TJ = 25C, VGS = 0V
ISD = 21A 3 diSD/dt = 100A/s VDD = 100V
TJ = 25C TJ = 125C TJ = 25C TJ = 125C
ISD 21A, di/dt 1000A/s, VDD = 400V, TJ = 125C
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25C, L = 5.44mH, RG = 25, IAS = 21A.
04-2009 Rev C 050-8151
3 Pulse test: Pulse Width < 380s, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(cr) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -8.32E-8/VDS^2 + 3.49E-8/VDS + 1.30E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein.
APT43F60B2_L
160
V
GS
70
= 10V T = 125C
140 ID, DRAIN CURRENT (A) 120 100
TJ = -55C
J
V
GS
= 7&8V
60 ID, DRIAN CURRENT (A) 50 40 30 20 10 0
5.5V 6V
TJ = 25C
80 60 40 20 0
TJ = 150C TJ = 125C
5V 4.5V
0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics
0
5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
3.0
NORMALIZED TO VGS = 10V @ 21A
160
VDS> ID(ON) x RDS(ON) MAX.
2.5 ID, DRAIN CURRENT (A)
140 120 100
250SEC. PULSE TEST @ <0.5 % DUTY CYCLE
2.0
TJ = -55C
1.5
80 60 40 20 0 0 1 2 3 4 5 6 7 8 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics Ciss
TJ = 25C TJ = 125C
1.0
0.5 0 -55 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 3, RDS(ON) vs Junction Temperature 80 70
20,000 10,000
TJ = -55C TJ = 25C
gfs, TRANSCONDUCTANCE
50
TJ = 125C
C, CAPACITANCE (pF)
60
1000
40 30 20 10 0 0 10 20 30 40 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current
ID = 21A
Coss 100 Crss 10
50
100 200 300 400 500 600 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage
0
16 VGS, GATE-TO-SOURCE VOLTAGE (V) 14 12
160 ISD, REVERSE DRAIN CURRENT (A) 140 120 100
TJ = 25C
VDS = 120V
10
VDS = 300V
8 6 4 2 50 100 150 200 250 300 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage 0 0
VDS = 480V
80 04-2009 050-8151 Rev C 60
TJ = 150C
40 20 0.3 0.6 0.9 1.2 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage 0 0
APT43F60B2_L
200 100
IDM
200 100
IDM
ID, DRAIN CURRENT (A)
10
13s Rds(on) 100s 1ms 10ms TJ = 125C TC = 75C 100ms DC line
ID, DRAIN CURRENT (A)
10
13s Rds(on) TJ = 150C TC = 25C 100s 1ms
1
1
10ms
Scaling for Different Case & Junction 100ms Temperatures: ID = ID(T = 25C)*(TJ - TC)/125 DC line
0.1
1
10 100 800 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area
0.1
C
10 100 800 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area
1
0.18 0.16 ZJC, THERMAL IMPEDANCE (C/W) D = 0.9 0.14 0.12 0.10
PDM
0.7
0.08 0.06 0.04
0.5
Note:
t1 t2
0.3 SINGLE PULSE
t1 = Pulse Duration
0.02 0 10-5
0.1 0.05 10-4
Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC
t
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration
1.0
T-MAX(R) (B2) Package Outline
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
TO-264 (L) Package Outline
4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.79 (.228) 6.20 (.244)
e3 100% Sn Plated
Drain
20.80 (.819) 21.46 (.845)
Drain
25.48 (1.003) 26.49 (1.043)
4.50 (.177) Max. 0.40 (.016) 0.79 (.031)
2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 2.29 (.090) 2.69 (.106) 19.81 (.780) 21.39 (.842)
2.29 (.090) 2.69 (.106)
19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055)
Gate Drain Source
0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118)
Gate Drain Source
04-2009
2.21 (.087) 2.59 (.102)
5.45 (.215) BSC 2-Plcs.
0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs.
These dimensions are equal to the TO-247 without the mounting hole.
Rev C
Dimensions in Millimeters and (Inches)
Dimensions in Millimeters and (Inches)
050-8151
Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.

▲Up To Search▲

Price & Availability of APT43F60B2

	To Download APT43F60B2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .