 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MIC MIC-2718 MIC-2728 MIC-2730 16-Channel Analog Input Module 4-Channel Isolated Analog Output Module 16-Channel Isolated Digital Input Module MIC-2718 16-Channel Analog Input Module The MIC-2718 offers multiple, highspeed data acquisition functions. It is a cost effective solution for industrial measurement and monitoring. * Channels: 16 single-ended or 8 differential, switch selectable * A/D converter: 12-bit, 8 sec. max. conversion time * On-board FIFO: 1 K words * Input range (software programmable): Bipolar: 0.005, 0.01, 0.05, 0.1, 0.5, 1, 5, 10 V Unipolar: 0 to 0.01, 0 to 0.1, 0 to 1,0 to 10 V * Overvoltage: 30 V max. * Maximum data throughput: 100 kHz (depends on input amplifier settling time and slew rate) Gain Speed 0.5, 1 100 kHz 5, 10 35 kHz 50, 100 7 kHz 500,1000 0.8 kHz * Accuracy: Gain=0.5, 1 0.01% of FSR 1LSB Gain=5, 10 0.02% of FSR 1LSB Gain=50,100 0.04% of FSR 1LSB Gain=500,1000 0.08% of FSR 1LSB * Linearity: 1-bit * Trigger mode: Software, pacer or external * Ext. trigger: TTL compatible * Data transfer: Program, interrupt or DMA * Signal conditioning circuit: Space for RC filter and 250 current shunt * Power consumption: +5 V @ 0.5 A max.; +12 V @ 0.2 A max. MIC-2000 Series MIC-2728 4-Channel Isolated Analog Output Module The MIC-2728 provides four doublebuffered 12-bit D/A outputs. Over 500 VDC of bus isolation protect your PC and peripherals from dangerous output voltages. * Channels: 4 isolated D/A channels * Resolution: 12-bits, double buffered * Output range: Unipolar: 0 to +5 V, 0 to +10 V Bipolar: 5 V, 10 V Current loop (sink); 0 to 20 mA, 4 to 20 mA * Settling time:: 60 seconds * Accuracy: 0.012% FS * Isolation voltage: > 500 VDC bus isolation * Reference voltage: Internal: -5 V or -10 V External: 10 V max. AC or DC * Voltage output drive: 10 mA max. * Current loop excitation: 8 V to 36 V * Power consumption: +5 V @ 0.5 A max.; +12 V @ 0.2 A max. MIC-2730 16-Channel Isolated Digital Input Module The MIC-2730 features a limit switch, alarms and/or sensors for noisy environments, and 16 optically isolated digital input channels for monitoring device On/Off status. * Number of inputs: 16 * Input mode: isolated or non-isolated (jumper selection) * Number of commons: 2 (isolated) * Input voltage: 0 ~ 30 V * Threshold voltage: Logic "0" : < 1 V Logic "1" : > 4 V * Input impedance: 2 k * Isolation voltage: 2500 VDC * Throughput: 10 kHz 11 Non-isolated Inputs (TTL-level) * Input voltage: Low: 0.8 V max. High: 2.0 V min. * Input load: Low: 0.4 mA max @ 0.5 V High: 0.05 mA max @ 2.7 V * Pull-up resistor: 10 k for dry contact * Throughput: 30 kHz typical * Number of indicator LEDs: 16 * Indication mode: Logic "1" : LED On Logic "0" : LED Off * Power consumption: +5 V @ 2 A Note: All specifications are subject to change without notice 11- 9 MIC-2000 Series Isolated Inputs |
Price & Availability of MIC-2718
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |