View SCFB3A0400_4544193.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Connector for CompactFlashTM
SCFB Series
Unique eject mechanism achieves high operability and 5mm ejection stroke.
For SD Memory Card For microSDTM Card For SIM Card 8pins For W-SIM For Memory Stick MicroTM For Memory StickTM Combine Type For Compact FlashTM For PC cards supporting CardBus For Express CardTM For CMOS Camera Module Structure Mounting type Mounting style Eject mechanism Stand-off Operating temperature range Voltage proof Performance Insulation resistance Initial Contact resistance Initial Insertion and removal cycle
Surface mounting type Standard mount/Reverse mount 2 step 0/1.2mm 20 to 60
Features
Metal-plated structure enhances noise reduction and mechanical strength. Screw clamping structure strengthens mounting. Minimized depth design contributes to smaller body structure.
Applications
For digital still cameras, digital camcorders, various personal digital assistants and printers For flat panel TVs For notebook PCs
Typical Specifications
Specifications Items Type Pin pitch Numbers of pins Applicable media Media ejection compatible
1.27mm 50pins Type , Type 5mm
500V AC 1minute 1,000M 40m min. max.
10,000cycles
46
Connector for CompactFlashTM SCFB Series
Product Line
Media ejection structure Mounting system Stand-off mm
0 2 step lever ejection type Standard mount 1.2 Reverse mount 0
Position of knob
Right Left Right Left Right Left
Applicable card
Product No. Pin header
SCFB1A0500
Ejector
SCFB3A0300 SCFB3A0900 SCFB3A0200 SCFB3A1000 SCFB3A0400 SCFB3A0500
Drawing No.
1 2 3 4 5 6
Type /Type
SCFB1A0900 SCFB1A0600
For SD Memory Card For microSDTM Card For SIM Card 8pins For W-SIM For Memory Stick MicroTM
Note
Pin headers and ejectors are supplied as separate parts. To apply these parts, solder the pin header to the printed circuit board, assemble the ejector to the pin header and screw cramp.
Dimensions
No. 2 step Standard type Stand-off 0mm Position of knob: Right
Range of movement of the lever (48.35) 22.25 39.9 17 max. 3 min. 27.1 max. 4.5 5.3 max. 7.1 max. 26.1 6.3 Full height 0.5 21.75 43.5 39.9 (0.635 49=)31.115 15.7 min. Pitch 0.635 4.3 1.35 Width 0.35 0.5
Unit:mm
Style PC board mounting hole dimensions Viewed from the mounting face side
For Memory StickTM
2-3.6 min. 2-3.6 min. 2.5 min.
2.2 2- 1.1
0.3 max.
Combine Type
5 min.
Card end pos.
1.
2
4.1 6.3 max. 22.15 36.4 (40.9)
Card end pos.
2.4
5.4
22.65 26.85
1
2.5
#1
#26 2.5 max.
20.8 max.
13.5 min.
#25 #50 23.2 max. 26 min. 27.7 min. 3.1 min.
8.7 max.
For Compact FlashTM For PC cards supporting CardBus For Express CardTM For CMOS Camera Module
32.4 22.15 4.1
1.5 8
Knob over tra. Knob lock pos. Knob eject pos. PC board mounting side PC board mounting side
2-2.6
Card center 2.15 3.5 Card eject stroke 5 1.27
25.95 Card center #1
(51.6) (55)
27.65 29.05 1.27 #25
6 Knob stroke
24.25
4.45 27.35
24.25 24.6 min.
2.25 min. 8.9 22 27.35 29.45 min.
2-Ground pad
5
2.7
#26 Pitch 0.635 43 43.5
0.7
#50 2-1
No part mounting No pattern area
2-2.54 max.
2 step Standard type Stand-off 0mm Position of knob: Left
Full height 6.3 0.3max. 0.5 7.1 max. 5.3 max. 4.5
Range of movement of the lever 27.1 26.1 (48.35) 22.25 39.9 17 max. 3 min.
21.75 2-3.6 min. 2.5 min.
2-M2 P0.4
5 min. 2-3.6 min.
1.35 4.3
43.5 39.9 (0.635 49=) 31.115 15.7 min. Pitch 0.635 Width 0.35 #25 2.5 max.
Card end pos.
0.5
26.85 22.65 13.5 min. 8.7 max.
22.15 6.3 max. 4.1
22.15 32.4
Card end pos.
#26 #1 23.2 max. 20.8 max. 26 min. 27.7 min. 2-Ground pad 2.25 min. 8.9
(40.9) 36.4
4.1
5.4
2
Knob over tra. 8 1.5 2-M2 P0.4 5
2-2.6
5.3
2.4
Knob eject pos. Knob lock pos. 6 Knob travel PC board mounting side
Card eject travel
4.45 (51.6)
22 27.35
3.1 min.
24.25 24.6 min.
29.45 min.
Card center 2.15
(55) 2.7 1.27 1.27 #1 Card center #25
3.5
PC board mounting side 5
No part mounting No pattern area
2-o2.54 max.
0.7
2-o1 #26
#50 Pitch 0.635 43 43.5
2.5 2.4
#50
5.3
1 .2
2.4
2.2 2- .1 1
47
Connector for CompactFlashTM SCFB Series
Dimensions
No. 2 step Standard type Stand-off 1.2mm Position of knob: Right
Range of movement of the lever (48.35) 22.25 39.9 17 max. 3 min. 27.1 max. 26.1 4.5 5.3 max. 7.1 max.
Unit:mm
Style PC board mounting hole dimensions Viewed from the mounting face side
For SD Memory Card For microSDTM Card For SIM Card 8pins
21.75
(Full height) 7.5 0.2 max. 0.5
45.7 min.
Card end pos.
0.5 2.5
3
6.3 max. 36.4 (40.9)
32.4 2-22.15 2-4.1
For Memory Stick MicroTM For Memory StickTM
Knob over tra. Knob lock pos. Knob eject pos.
1.5 8
4-Ground pad
2-M2 P0.4 5 Card eject stroke 4.45 27.65 (53.6) #1 3.9 1.27 #25
6 Knob stroke
PC board mounting side
5.3
3
5.4 2.4
26.65 min.
Card center 3.35
24.05 min.
PC board mounting side
48.5
28.65 min.
Combine Type For Compact FlashTM For PC cards supporting CardBus For Express CardTM For CMOS Camera Module
3.5 1.27
0.7 1.1
#26
#50 Pitch 0.635 43 43.5
2-o1
5
2-o2.54 max.
Mounted part height 1.15 max. No part mounting
2 step Standard type Stand-off 1.2mm Position of knob: Left
7.1 max. 5.3 max. 4.5 (Full height) 7.5 0.3 max. 0.5
Range of movement of the lever 27.1 max. (48.35) 22.25 39.9 3 min.
21.75
17 max.
4.3 1.35
0.5
Card end pos.
2-4.1 2-22.15 32.4 Card end pos.
(40.9) 36.4 6.3 max.
Card end pos. 4.2 max. 1.1 min.
26.4 max. 22.65
#26 #25 #1 2.5 max. #50 40.2 max. 46.2 min. 26.65 min.
8 1.5
4
Knob over tra. Knob lock pos. Knob eject pos. PC board mounting side
4-Ground pad
2-M2 P0.4 4.45 27.65 5.36 5
48.5
6
Knob stroke
25.95
Card eject travel 3.5 Card center 3.35
28.65 min.
24.05 min.
1.27 3.9 #1 PC board mounting side
Card center #25 1.27
5
2-o2.54 max.
48
1.1
2-o1 #26
#50 Pitch 43 43.5
Mounted part height 1.15 max. No part mounting
5.3
10 min. 5.4 2.4
2.5
1.2
2-M2
P0.4
7.1 min. 5 min.
26.1
45.7 min. 43.5 39.9 15.7 min. (0.635 49=)31.115 Pitch 0.635 Width 0.35
1.1 min. 4.2 max.
For W-SIM
Card end pos.
#50 #25
10 min. 22.65 26.4 max.
#26 2.5 max. #1 40.2 max. 46.2 min.
5 min. 7.1 min.
2-M2
P0.4
43.5 39.9 (0.635 49) 31.115 15.7 min. Pitch 0.635 Width 0.35 4.3 1.35
1.2
2.2 4- .1 1
.2 4-2 .1 1
Connector for CompactFlashTM SCFB Series
Dimensions
No. 2 step Reverse type Stand-off 0mm Position of knob: Right
Range of movement of the lever (Full height) 5.85 2-M2 P0.4 7.1 max. 5.3 max. 4.5 27.1 max. 25.75 17 max.
43.5 21.75 39.9 (0.635 49=) 31.115 15.7 min. 2.5 max. Pitch 0.635 Width 0.35 1.35 4.3
Unit:mm
Style PC board mounting hole dimensions Viewed from the mounting face side
For SD Memory Card
(48) 39.9
22.25
7.1 min. 5 min. 2.5 min.
2-3.6 min. 2-3.6 min.
2- 2.2 o .1 o1
For microSDTM Card For SIM Card 8pins For W-SIM
o1 .2
0.3 max. 0.5
3 min. 3
0.5
Card end pos.
22.65 13.5 min. 9.49 min.
0.7
22.15 6.3 max. 4.1
Card end pos.
Knob over tra.
4.1
8 1.5
5.3
2.4
24.25 (55) 25.95 #26
1.27 3.5 Card eject stroke
6 Knob stroke
Knob lock pos. Knob eject pos. PC board mounting side
2-Ground pad
3.4 Card center
4.45 27.35 27.65 29.05 1.27 #50
2.25 min. 8.9 22 27.35 29.45 min. 29.75 24.6 min. 26.65
3.1 min.
5
2-M2 P0.4
#50 #25 23.1 min. 20.85 max. 26 min. 27.7 min.
#26 #1
(40.9) 36.4
22.15 31.6
2-o
2.6
5.4 2.4
For Memory Stick MicroTM For Memory StickTM Combine Type
5
5
PC board mounting side
2.85
No part mounting Land area No pattern area
2-2.54 max.
#25 Pitch 0.635 43 43.5
0.85
#1
2-1
For Compact FlashTM For PC cards supporting CardBus For Express CardTM
2 step Reverse type Stand-off 0mm Position of knob: Left
(48.35) 39.9 27.1 max.
Range of movement of the lever 26.1 (Full height) 5.85 0.3 max. 0.5
21.75
4.5 5.3 max. 7.1 max.
22.25
4.1 6.3 max. 22.15
Card end pos.
31.6 22.15 4.1
(40.9)
6
Knob over tra. Knob lock pos. Knob eject pos. 6 Knob stroke 1.5 8 Card eject stroke 5
3.1 min.
PC board mounting side
2.4
#25 5.4 #50
2.5 max.
2-2.6
#26 #1 23.2 max. 20.8 max. 26 min. 27.7 min.
Card end pos.
4.45 (51.6) (55) 1.27 #50 #26
24.25 24.6 min.
2.25 min. 8.9 22 27.35 29.45 min.
2-Ground pad
Card center 3.4 3.5 1.27
2.85
5
PC board mounting side No part mounting No pattern area
2-2.54 max.
#25 Pitch
#1 2-1 43 43.5
5.3
8.7 max. 13.5 min. 22.65 26.85
0.7
0.5 2.5
3
4.3 1.35
1.2
3 min.
2.5 min.
17 max.
2.4
2-3.6 min. 5 min.
43.5 39.9 (0.635 49=) 31.115 15.7 min. Pitch 0.635 Width 0.35
For CMOS Camera Module
2-3.6 min.
2.2 2-1.1
49
Small Memory Card Connectors
Soldering Conditions
Example of Reflow Soldering Condition Reference
1. Heating method: Double heating method with infrared heater. 2. Temperature measurement: Thermocouple 0.1 to 0.2 CA K or CC T . 3. Temperature profile Surface of products
For SD Memory Card For microSDTM Card For SIM Card 8pins For W-SIM For Memory Stick MicroTM For Memory StickTM Combine Type
240 (max.) Temperature (C ) 230 (min.) 200 180 150 100 Time (s) Pre-heating 90 30 sec. 10 sec.(max.)
Room temperature
Heating time
For Compact FlashTM For PC cards supporting CardBus For Express CardTM For CMOS Camera Module
sec.
Cautions for using this product
1. When soldering terminals, there is a danger that load placed on the terminals may cause rattle, deformation or electrical degradation to occur depending on the conditions. Caution is therefore required. 2. Avoid use of water-soluble soldering flux, since it may corrode the product. 3. Check and conform to reflow soldering requirements under actual mass production conditions. 4. PC board warping may alter the characteristics. Please take this into consideration when designing patterns and layout. 5. The card specifications are provided by the above manufactures. Products by other manufactures may not be compliant with these specifications and are subject to change without prior notice.
50

▲Up To Search▲

Price & Availability of SCFB3A0400

	To Download SCFB3A0400 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .