 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 587-1 Shielded Power Inductors - LPS6235 Series * Low DCR; high current; shielded construction * Perfect for backlight applications Designer's Kit C345 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 460 - 480 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 350/7reel; 1500/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: 3.1 mm PCB washing Only pure water or alcohol recommended Part number1 LPS6235-682ML_ LPS6235-822ML_ LPS6235-103ML_ LPS6235-123ML_ LPS6235-153ML_ LPS6235-183ML_ LPS6235-223ML_ LPS6235-333ML_ LPS6235-473ML_ LPS6235-563ML_ LPS6235-683ML_ LPS6235-823ML_ LPS6235-104ML_ LPS6235-124ML_ LPS6235-154ML_ LPS6235-224ML_ LPS6235-334ML_ LPS6235-474ML_ LPS6235-564ML_ LPS6235-684ML_ LPS6235-824ML_ LPS6235-105ML_ LPS6235-155ML_ LPS6235-185ML_ LPS6235-225ML_ LPS6235-335ML_ LPS6235-475ML_ LPS6235-565ML_ LPS6235-685ML_ LPS6235-825ML_ LPS6235-106ML_ Isat (A) DCR SRF Inductance2 max3 typ4 10% 20% 30% 20% (H) (Ohms) (MHz) drop drop drop 5 Irms (A)6 20C 40C rise rise 1.30 1.30 1.28 1.25 1.22 1.20 1.10 1.00 0.80 0.75 0.73 0.72 0.70 0.60 0.53 0.45 0.40 0.36 0.33 0.28 0.26 0.24 0.19 0.18 0.16 0.14 0.12 0.10 0.090 0.085 0.075 1.90 1.85 1.80 1.75 1.70 1.65 1.60 1.30 1.15 1.07 1.00 0.95 0.90 0.80 0.73 0.64 0.55 0.50 0.46 0.40 0.33 0.30 0.26 0.23 0.22 0.180 0.150 0.130 0.120 0.115 0.095 1. Please specify termination and packaging codes: LPS6235-106MLC Termination: L= RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C= 7 machine-ready reel. EIA-481 embossed plastic tape (350 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 6.8 8.2 10.0 12.0 15.0 18.0 22.0 33.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 220.0 330.0 470.0 560.0 680.0 820.0 1000.0 1500.0 1800.0 2200.0 3300.0 4700.0 5600.0 6800.0 8200.0 10000.0 0.075 0.095 0.100 0.110 0.125 0.140 0.145 0.180 0.245 0.280 0.345 0.315 0.375 0.435 0.535 0.720 1.02 1.58 1.75 1.97 2.70 3.20 4.60 5.42 6.40 8.90 14.0 16.4 21.4 24.0 29.0 55 48 37 29 25 24 24 16 13 12 10.8 10.0 9.0 8.3 7.3 5.6 4.4 3.6 3.1 2.8 2.5 2.2 1.9 1.7 1.5 1.1 0.94 0.86 0.80 0.70 0.61 2.6 2.5 2.3 1.9 1.9 1.7 1.6 1.3 1.1 1.0 0.90 0.46 0.46 0.44 0.37 0.31 0.26 0.22 0.20 0.17 0.16 0.14 0.12 0.11 0.090 0.080 0.070 0.070 0.070 0.062 0.059 2.7 2.6 2.4 2.2 2.0 1.8 1.7 1.4 1.2 1.0 0.94 0.52 0.52 0.48 0.43 0.36 0.29 0.25 0.22 0.19 0.18 0.17 0.13 0.12 0.11 0.090 0.077 0.080 0.075 0.070 0.067 2.8 2.7 2.5 2.3 2.0 1.9 1.7 1.5 1.2 1.1 0.96 0.55 0.54 0.51 0.45 0.37 0.30 0.26 0.23 0.21 0.19 0.18 0.14 0.13 0.11 0.10 0.084 0.085 0.080 0.078 0.074 Specifications subject to change without notice. Please check our website for latest information. Document 587-1 Revised 10/17/08 (c) Coilcraft, Inc. 2009 Document 587-2 Shielded SMT Power Inductors - LPS6235 Series Typical L vs Current 10000 3300 H 1000 H 330 H 100 H 33 H 10 H Typical L vs Frequency 10000 3300 H 1000 H 330 H 100 H 33 H 10 H 1000 1000 Inductance (H) Inductance (H) 100 100 10 10 1 0.01 0.1 1 10 1 0.01 0.1 1 10 Current (A) Frequency (MHz) 0.236 0.003* 6,00 0,076 Typical Current Derating 120 110 Percent of rated current 100 90 80 70 60 50 40 25C XXX X Dash number Internal code 0.236 0.003* 6,00 0,076 Winding direction 30 20 10 0 -40 -20 Isat Irms 0 20 0.138 max 3,50 Recommended Land Pattern 40 60 80 100 120 140 0.079 2,00 0.165 4,20 Ambient temperature (C) 0.039 typ 1,00 0.260 0.167 6,60 4,25 0.165 4,20 0.071 1,80 0.039 typ 1,00 * Dimensions are of the case not including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. 0.079 2,00 0.167 4,25 0.260 6,60 Dimensions are in inches mm Specifications subject to change without notice. Please check our website for latest information. Document 587-2 Revised 10/17/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of LPS6235-103ML
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |