View CL1_4543499.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

L1 / SML1
Thin Film Limiter Module 5 to 3000 MHz
Features * * * VOLTAGE VARIABLE LIMITING LEVEL: -10 TO 0 dBm LOW INSERTION LOSS AT LOW INPUT LEVELS: < 2.0 dB (TYP.) GOOD SUPPRESSION OF EVEN ORDER HARMONICS DUE TO BALANCED CIRCUIT DESIGN * EXCELLENT PHASE RESPONSE 0.3 DEGREE / dB TO 160 MHz (TYP.) Description
The L1 signal limiter is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This design uses Schottky bridge quad and anti-parallel diodes, which provide consistent limiting levels over a broadband frequency range. Both TO-8 and SMTO-8 packages are hermetically sealed, and MIL-STD-883 environmental screening is available.
Rev. V2
Product Image
Ordering Information
Part Number
L1 SML1 CL1 **
Package
TO-8 Surface Mount SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50, VCC = +15 VDC
Parameter
Frequency Insertion Loss @ PIN < -20 dBm (max.) 5-1000 MHz 1000-3000 MHz Input VSWR (max.) PIN < -10 dBm, +10 < Bias < +20 Vdc Output VSWR (max.) PIN < -10 dBm, +10 < Bias < +20 Vdc 5-1000 MHz 1000-3000 MHz Output Limiting Level @ PIN = +20 dBm (max.) 5-2000 MHz 2000-3000 MHz Bias Current (max.) @ 15 Vdc @ 20 Vdc
Absolute Maximum Ratings
Guaranteed Parameter Absolute Maximum
-62C to +125C +125C +25 V +20 dBm 400 mW 1W +125C
Units
MHz dB dB
Typical 25C
5-3200 2.0 3.0 1.7:1
0 to 50C -54 to +85C*
5-3000 3.0 4.5 1.9:1 5-3000 3.5 4.5 2.1:1 Storage Temperature Case Temperature DC Voltage Continuous Input Power
1.7:1 2.0:1 dBm dBm mA mA 2.5 6.5 7.0 10.0
2.0:1 2.3:1 4.0 7.0 9.0
2.2:1 2.5:1 4.5 7.0 10.0
Short Term Input power (1 minute max.) Peak Power (3 sec max.) "S" Series Burn-In Temperature (case)
* Over temperature performance limits for part number CL1, guaranteed from 0oC to +50oC only.
Limiting and Insertion Loss Characteristics at +25C
Bias Voltage +20 Volts +15 Volts +10 Volts +5 Volts 1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.
Output Level at Limiting Threshold (1 dB comp.) Typical 50 MHz 500 MHz 1000 MHz -0.8 dBm -1.0 dBm -1.0 dBm -2.0 dBm -4.5 dBm -11.5 dBm -2.0 dBm -5.0 dBm -11.8 dBm -2.2 dBm -5.5 dBm -12.0 dBm
L1 / SML1
Thin Film Limiter Module 5 to 3000 MHz
Typical Performance Curves at +25C
Rev. V2
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.
L1 / SML1
Thin Film Limiter Module 5 to 3000 MHz
Typical Performance Curves at +25C Outline Drawing: TO-8 *
Rev. V2
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: Surface Mount *
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: SMA Connectorized *
WEIGHT: 19 grams (0.67 oz.) max
3
Dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.

▲Up To Search▲

Price & Availability of CL1

	To Download CL1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .