|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE GENERAL DESCRIPTION The CM2836/B/C family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30A typ.), low dropout voltage, and high output voltage accuracy, making them ideal for battery applications. EN input connected to CMOS has low bias current. The space-saving SC70 package is attractive for "Pocket" and "Hand Held" applications. These rugged devices have both Thermal Shutdown, and Current limit to prevent device failure under the "Worst" of operating conditions. In application requiring a low noise, regulated supply, place a 1000pF capacitor between Bypass and Ground. The CM2836/B/C is stable with a Low ESR output capacitance of 1.0F or greater. FEATURES Very Low Dropout Voltage Low Current Consumption: Typ. 30A, Max. 35A More Options Output Voltage High Accuracy Output Voltage: +/- 2% Guaranteed 300mA Output Input Range up to 7.0V Thermal Shutdown Current Limiting Stability with Low ESR Capacitors Compact Package: SOT-23-3 / SOT-23-5 / SOT-89 / SC70-5 Factory Pre-set Output Voltages Low Temperature Coefficient APPLICATIONS Battery-powered devices Personal communication devices Home electric/electronic appliances PC peripherals TYPICAL APPLICATIONS 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 1 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE PIN CONFIGURATION SOT-23-3 Top View 3 SOT-23-5 Top View Pin 1 Pin 2 Pin 3 1 2 2836 GND VOUT VIN 2836B VIN VOUT GND Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 2836 VIN GND EN BYP VOUT SC70-5 Top View SOT-89 Top View Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 CM2836 VIN GND EN BYP VOUT 2836B NC GND NC VIN VOUT 2836C NC VIN NC GND VOUT Pin 1 Pin 2 Pin 3 1 2 3 2836 GND VIN VOUT BLOCK DIAGRAM IN OUT 1uA O v e rc u rre n t S h u td o w n T h e rm a l S h u td o w n EN BYP R1 + Vref = 1.176V AMP R2 GND 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 2 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE ORDERING INFORMATION Example: Part Number CM2836/BGSIM23* CM2836/BXSIM23* CM2836GSIM25* CM2836XSIM25* CM2836GSIM89* CM2836XSIM89* CM2836/B/CGSIM75* CM2836/B/CXSIM75* Output Voltage 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V Temperature Range -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 Package SOT-23-3 SOT-23-3 SOT-23-5 SOT-23-5 SOT-89 SOT-89 SC70-5 SC70-5 Note: For other pre-set output voltage requirements, please contact Champion Sales office. Please refer to page 10 *G : Suffix for PB Free Product *X : Suffix for Halogen Free and PB Free Product ABSOLUTE MAXIMUM RATINGS Input Voltage Output Current Output Voltage ....................................................... +7V ............................... PD / (VIN - Vo) mA OPERATING RATINGS Ambient Temperature Range (TA) ............. -40 to +85 Junction Temperature Range ............... -40 to +150 ............................ GND-0.3V to VIN+0.3V ESD Classification ................................................... B THERMAL INFORMATION Parameter Thermal Resistance (jc) Thermal Resistance (jc) Thermal Resistance (jc) Package SOT-23 SOT-23-5 SOT-89 SC70-5 SOT-23 Internal Power Dissipation (PD) (T = 100) SOT-23-5 SOT-89 SC70-5 Maximum Junction Temperature Maximum Lead Temperature (10 Sec) Maximum 160 100 250 250 400 200 150 300 Unit /W /W /W mW mW mW Caution: Stress above the listed absolute rating may cause permanent damage to the device. 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 3 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE ELECTRICAL CHARACTERISTICS TA = +25; unless otherwise noted CM2836/B/C Parameter Input Voltage Output Voltage Accuracy Symbol VIN VOUT IO = 1mA to 300mA 1.2V PSRR Power Supply Rejection (Sot23-5/SC70-5) Output Voltage Noise (Sot23-3/Sot-89) Output Voltage Noise (Sot23-5/SC70-5) Shutdown Supply Current EN Input Bias Current eN ISD IEH IEL VEH VEL VIN=5.0V, VOUT=0V, VEN < VEL VEN=VIN, VIN=2.6V to 7V VEN=0, VIN=2.6V to 7V VIN=2.6V to 7V VIN=2.6V to 7V EN Input Threshold Note 1. VIN(MIN) = VOUT + VDROPOUT Note 2. The input voltage should be better applied before a current source load is applied to avoid start up problem. 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 4 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE DETAILED DESCRIPTION The CM2836/B/C family of CMOS regulators contains a PMOS pass transistor, voltage reference, error amplifier, over-current protection, output short protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current protection, output short protection, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds 150, or the current exceeds 300mA. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120. The CM2836/B/C switches from voltage mode to current mode when the load exceeds the rated output current. This prevents over-stress. ENABLE The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shut off, and all internal circuits are powered down. In this state, the quiescent current is less than 2A. This pin behaves much like an electronic switch. EXTERNAL CAPACITOR The CM2836/B/C is stable with a Low ESR output capacitor to ground of 1.0F or greater. It can keep stable even with higher ESR capacitors. A second capacitor is recommended between the input and ground to stabilize VIN. The input capacitor should be larger than 1F to have a beneficial effect. All capacitors should be placed in close proximity to the pins. A "quiet" ground termination is desirable. 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 5 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE TYPICAL CHARACTERISTICS 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 6 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 7 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE PACKAGE DIMENSION SOT-23-3 (M23) D 3 b1 c1 With Plating A c A1 A2 E1 b Base Metal Section B-B E b b1 c c1 D E 1 e e1 2 E1 b L L1 e e1 1 1 2 A2 A 2 A1 See Section B-B SOT-23-5 (M25) D 5 4 b1 c1 With Plating A L L1 c A1 A2 E1 b Base Metal Section B-B E b b1 c c1 D E 1 e 2 3 E1 e1 b L L1 e e1 1 1 2 A2 A 2 A1 See Section B-B 2009/07/17 Rev1.3 Champion Microelectronic Corporation L L1 Page 8 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE SOT-89 (M89) D D1 A 1.0 E H L e e1 5 C 8 A L b b1 C D D1 H E e1 b b1 b e SC70-5 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 9 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE NUMBERING SCHEME Ordering Number: CM2836/B/Cxyz (note1) Ordering Number: CM2836/B/CG(X)xyz (note2) note1: CM2836/B/C: 300mA CMOS LDO with enable x : Suffix for voltage output (note 3) y : Suffix for Temperature Range (note 4) z : Suffix for Package Type (note 5) note2: CM2836/B/C: 300mA CMOS LDO with enable G : Suffix for Pb Free Product X : Suffix for Halogen Free and PB Free Product note 3: see CMOS LDO Voltage Suffix Table CMOS LDO Voltage Suffix Table Output Voltage 1.2V 1.5V 1.7V 1.8V 2.0V 2.1V 2.2V 2.3V Suffix AC A C D F G H I Output Voltage 2.5V 2.6V 2.7V 2.8V 3.0V 3.1V 3.3V 3.6V Suffix K L M N P Q S V note 4: y= I : -40~+85 (only I grade support for all CMOS LDOs) note 5: Z is single alphabet with or without digits M25 : SOT-23-5 (TR only) M23 : SOT-23 (TR only) M89 : SOT-89 (TR only) SC70-5 (TR only) 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 10 CM2836/B/C 300mA LOW ESR CMOS LDO WITH ENABLE IMPORTANT NOTICE Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or environmental damage. CMC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of CMC products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. HsinChu Headquarter 5F, No. 11, Park Avenue II, Science-Based Industrial Park, HsinChu City, Taiwan T E L : +886-3-567 9979 F A X : +886-3-567 9909 Sales & Marketing 21F., No. 96, Sec. 1, Sintai 5th Rd., Sijhih City, Taipei County 22102, Taiwan, R.O.C. T E L : +886-2-2696 3558 F A X : +886-2-2696 3559 2009/07/17 Rev1.3 Champion Microelectronic Corporation Page 11 |
Price & Availability of CM2836GSIM23 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |