 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Oscilent Corporation IF SAW Filter | 813-SL96.0M-35 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL96.0M-35 . TYPE : 13.3 x 6.5mm SMD Base Station & Repeater Apr 18, 2007 96.00 MHz Filter 36.00 MHz Bandwidth PART NUMBER : 813-SL96.0M-35 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth -1.0 dB Bandwidth -3.0 dB Bandwidth -30.0 dB Amplitude Ripple (Fo +/- 2.5MHz) Amplitude Ripple Group Delay Variation Group Delay Variation (Fo +/- 2.5MHz) Absolute Delay Relative Attenuation Ambient Temperature Temperature Coefficient Minimum 35.0 36.0 40 Typical 96.0 16.8 50 50 36.0 36.8 40.0 0.4 1.2 65 38 0.942 47 25 -94 Maximum 18.5 41.0 0.7 2.0 120 70 Units MHz dB ohm ohm MHz MHz MHz dBp-p dBp-p nsec nsec sec dB C ppm/C *With Matching Network(ref. Testing Enirovnment Circut as shown below) *Custom parameters available. Contact Oscilent Sales for discussion. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-SL96.0M-35 Page 2 of 2 PIN Descriptions: IN-11, OUT-5, GROUND- 1,2,3,4,6,7,8,9,10,12 L1 = L3 = 68nH 56nH L2 = 56pF L4 = 68pF Source/Load Impedance = 50 ohms Frequency Responce Part No.: 813-SL96.0M-35 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 813-SL960M-35
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |