 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LVIR9033/TR3 DATA SHEET DOC. NO REV. DATE : QW0905-L VIR9033/TR3 :D : 04 - Aug - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. : LVIR9033/TR3 Page 1/7 Package Dimensions Cathode 0.4O 0.1 2.5 1.9 0.5O 0.1 2.0 1.4 0.76MAX 2.8 0.31TYP 0.61TYP 1.07TYP 7.62MAX 0.13TYP Note : 1.All dimension are in millimeter tolerance is O 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 2.52 t 9.3 12.00.3 7.84 5.5 Polarity 1.75 2.0 4.0 r 1.5 3.37 Note : The tolerances unless mentioned is O 0.2mm,Angle O 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVIR9033/TR3 Page 2/7 Reel Dimensions 16.0O 1.0 r 178O 2.0 14.2O 1.0 74.0O 1.5 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices Features: 1. High radiant intensity. 2. Suitable for pulsed applications. 3. Low average degradation. Descriptions: The LVIR9033/TR3 series are super-high efficiency Gallium Aluminum Arsenide infrared emitting diodes encapsulated in water clear plastic T-1 3/4 package individually Device Selection Guide: PART NO LVIR9033/TR3 MATERIAL GaAIAs LENS COLOR Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVIR9033/TR3 Page 3/7 Absolute Maximum Ratings at Ta=25 J Ratings Parameter Symbol VIR Power Dissipation Peak Forward Current (300PPS,1g s Pulse) Forward Current Reverse Voltage Electrostatic Discharge Operating Temperature Storage Temperature Soldering Temperature PD IFP IF Vr ESD Topr Tstg Tsol 100 3 50 5 UNIT mW A mA V 2000 -55 ~ +100 -55 ~ +100 Max 260J for 5 sec Max (2mm from body) V J J Electrical Optical Characteristics (Aa=25J ) PARAMETER Radiant Intensity Aperture Radiant Incidence Peak Emission Wavelength Spectral Line Half Width Forward Voltage Reverse Current Viewing Angle SYMBOL Le Ee Min. 1.6 0.2 Typ. 2.7 0.4 940 50 Max. UNIT mW/sr mW/cm nm nm 2 TEST CONDITION IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V f peak f VF IR 2c 1/2 1.2 1.6 100 V g A deg 20 Note : 1.The forward voltage data did not including O 0.1V testing tolerance. 2. The radiant intensity data did not including O 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVIR9033/TR3 Page 4/7 Typical Electro-Optical Characteristics Curve VIR CHIP 1000 Relative Radiant Intensity Normalize @20mA 1.0 Forward Current [mA] 100 10 0.5 1.0 0.1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.0 800 850 900 950 1000 1050 1100 Forward Voltage[V] Fig 3. Relative Radiant Power vs. Forward Peak Current Relative Radiant Power Normalized @ 20mA 10.0 Wavelength[nm] Fig.4 Relative Radiant Power vs. Forward Peak Current 10.0 Relative Radiant Power Normalized @ 100 mA 1.0 10 100 1.0 1.0 0.1 0.1 10 100 1000 IFDC[mA] IFPK[mA] Fig.5 Forward DC Voltage vs. Temperature Forw ard DC Voltage @ 20 mA Normalize @ 25J 1.2 Fig.6 Relative Radiant Power vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Relative Radiant Power @ 20mA, Normalize @ 25J Ambient Temperature [J ] Ambient Temperature [J ] LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVIR9033/TR3 Recommended Soldering Conditions 1. Hand Solder Basic spec is O 280J 3 sec one time only. Page 5/7 2. Wave Solder Soldering heat Max. 260J 245O 5J within 5 sec Preheat 120 ~ 150J 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (J ) 240 Rising +5J /sec Cooling -5J /sec 150 120 Preheat 60 ~ 120 sec 5sec Time 3-2 PB-Free Reflow Solder 1~5 C/sec 260 C MaX. 10sec.Max Preheat 180~200 C 1~5 C/sec Above 220 C 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVIR9033/TR3 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5J ~35J ,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 J ~ 35J ,RH60%, they should be treated at 60JO 5 J fo r 15hrs. Page 6/7 Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A LED Circuit model B LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LVIR9033/TR3 Page 7/7 Reliability Test: Test Item Test Condition 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Description This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. Reference Standard MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Operating Life Test High Temperature Storage Test 1.Ta=105 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. JIS C 7021: B-12 High Temperature High Humidity Test 1.Ta=65JO 5J 2.RH=90 %~95% 3.t=240hrs O 2hrs The purpose of this test is the resistance of the device under tropical for hous. MIL-STD-202:103B JIS C 7021: B-11 Thermal Shock Test 1.Ta=105 JO 5J &-40JO (10min) (10min) 2.total 10 cycles 5J The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 JO 5J 2.Dwell time= 10 O 1sec. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 JO 5J 2.Dwell time=5 O 1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 |
Price & Availability of LVIR9033-TR3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |