 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SBL8L40, SBLF8L40 & SBLB8L40 Vishay General Semiconductor Schottky Barrier Rectifier TO-220AC ITO-220AC 2 SBL8L40 PIN 1 PIN 2 2 1 SBLF8L40 PIN 1 1 CASE PIN 2 TO-263AB K FEATURES * Guardring for overvoltage protection * Lower power losses, high efficiency * Low forward voltage drop * High forward surge capability * High frequency operation * Meets MSL level 1, per J-STD-020C, LF max peak of 245 C (for TO-263AB package) * Solder Dip 260 C, 40 seconds (for TO-220AC & ITO-220AC package) * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters and polarity protection application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: As marked Mounting Torque: 10 in-lbs maximum 2 1 SBLB8L40 PIN 1 PIN 2 K HEATSINK MAJOR RATINGS AND CHARACTERISTICS IF(AV) VRRM IFSM VF Tj max 8A 40 V 250 A 0.41 V 125 C MAXIMUM RATINGS (TC = 25 C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current (see Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per leg Peak repetitive reverse current at tp = 2 s, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AC only) From terminal to heatsink t = 1 minute SYMBOL VRRM VRWM VDC IF(AV) IFSM IRRM dv / dt TJ, TSTG VAC VALUE 40 28 40 8 250 1.0 10000 - 65 to + 125 1500 UNIT V V V A A A V / s C V Document Number: 88825 Revision: 25-May-07 www.vishay.com 1 SBL8L40, SBLF8L40 & SBLB8L40 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS at IF = 4 A, at IF = 4 A, at IF = 8 A, at IF = 8 A, Tj = 25 C Tj = 125 C Tj = 25 C Tj = 125 C Tj = 25 C Tj = 100 C SYMBOL VALUE 0.44 0.35 0.50 0.41 1.0 75 UNIT Maximum instantaneous forward voltage (1) VF V Maximum instantaneous reverse current at DC blocking voltage (1) Note: (1) Pulse test: 300 s pulse width, 2 % duty cycle IR mA THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case per leg SYMBOL RJC SBL 3.2 SBLF 4.0 SBLB 3.2 UNIT C/W ORDERING INFORMATION (Example) PACKAGE TO-220AC ITO-220AC TO-263AB TO-263AB TO-220AC ITO-220AC TO-263AB TO-263AB Note: (1) Automotive grade AEC Q101 qualified PREFERRED P/N SBL8L40-E3/45 SBLF8L40-E3/45 SBLB8L40-E3/45 SBLB8L40-E3/81 SBL8L40HE3/45 (1) SBLF8L40HE3/45 (1) SBLB8L40HE3/45 (1) SBLB8L40HE3/81 (1) UNIT WEIGHT (g) 1.80 1.94 1.33 1.33 1.80 1.94 1.33 1.33 PACKAGE CODE 45 45 45 81 45 45 45 81 BASE QUANTITY 50/Tube 50/Tube 50/Tube 800/Reel 50/Tube 50/Tube 50/Tube 800/Reel DELIVERY MODE Tube Tube Tube Tape Reel Tube Tube Tube Tape Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) Average Forward Rectified Current (A) 10 100 Instantaneous Forward Current (A) 8 SBL8L40 SBLB8L40 TA = 125 C 10 6 SBLF8L40 4 1 TA = 25 C 0.1 2 0 0 50 100 150 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Case Temperature (C) Instantaneous Forward Voltage (V) Figure 1. Maximum Forward Current Derating Curve Figure 2. Typical Instantaneous Forward Characteristics www.vishay.com 2 Document Number: 88825 Revision: 25-May-07 SBL8L40, SBLF8L40 & SBLB8L40 Vishay General Semiconductor 105 10 Instantaneous Reverse Current (A) 103 TA = 75 C 10 2 10 TA = 25 C 1 0.1 0 20 40 60 80 100 Thermal Impedance (C/W) 1 0.01 104 TA = 125 C 0.1 1 10 100 Reverse Voltage (V) Heating Time (s) Figure 3. Typical Reverse Characteristics Figure 5. Transient Thermal Impedance 10000 Junction Capacitance (pF) 1000 100 0.1 1 10 100 Reverse Voltage (V) Figure 4. Typical Junction Capacitance Document Number: 88825 Revision: 25-May-07 www.vishay.com 3 SBL8L40, SBLF8L40 & SBLB8L40 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54)MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) PIN 1 PIN 2 CASE ITO-220AC 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.404 0.384 0.076 (1.93) 45 Ref. (10.26) (9.75) Ref. ref. See note See note 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 Ref. (1.93) Ref. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.671 (17.04) 7 Ref. 0.651 (16.54) 0.350 (8.89) 0.330 (8.38) 7 Ref. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.635 (16.13) 0.625 (15.87) 0.603 (15.32) 0.573 (14.55) 0.600 (15.24) 0.580 (14.73) PIN 2 1 Copper exposure 0.010 (0.25) Max. 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) PIN 2 7 Ref. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027(0.68) 0.205(5.20) 0.195(4.95) 0.022(0.56) 0.014(0.36) 0.025 (0.64) 0.015 (0.38) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) Note: Copper exposure is allowable for 0.005 (0.13) Max. from the body TO-263AB 0.41 (10.45) 1 0.380 (9.65) 0.245 (6.22) MIN K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 MIN. (10.66) 0.624 (15.85) 0.591(15.00) 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.33 (8.38) MIN. 0-0.01 (0-0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.140 (3.56) 0.110 (2.79) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 0.15 (3.81) MIN. 0.08 MIN. (2.032) 0.105 (2.67) (0.095) (2.41) www.vishay.com 4 Document Number: 88825 Revision: 25-May-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of SBL8L40-E345
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |