View CPC1963GSTR_4510548.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CPC1963
AC Power Switch
Parameter Blocking Voltage Load Current On State Voltage Drop
Ratings 600 500 1.4
Units VP mArms Vrms (at IL = 500mA)
Description
The CPC1963 is an AC Solid State Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The CPC1963 switches are robust enough to provide a blocking voltage of up to 600VP. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result, the CPC1963 is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays.
Features
* * * * * * * * * * * Load Current up to 0.5Arms 600VP Blocking Voltage 5mA Sensitivity Zero-Crossing Detection DC Control, AC Output Optically Isolated TTL and CMOS Compatible Low EMI and RFI Generation High Noise Immunity Machine Insertable, Wave Solderable Flammability classification rating of V-0
Approvals
* UL 508 Recognized Component: File #: E69938 * CSA Certified Component: Certificate # 1172007
Applications
* * * * * * * * * * Programmable Control Process Control Power Control Panels Remote Switching Gas Pump Electronics Contactors Large Relays Solenoids Motors Heaters
Ordering Information
Part Number CPC1963G CPC1963GS CPC1963GSTR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel)
Pin Configuration
1 + LED - LED 2 3 ZC 6 5 4 AC Load AC Load
Pb
RoHS
2002/95/EC
e3
www.clare.com 1
DS-CPC1963-R04
CPC1963
Absolute Maximum Ratings
Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature
1 2
Ratings Units 600 VP 5 V 50 mA 1 A 150 mW 800 mW 3750 Vrms -40 to +85 C -40 to +125 C
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Derate Linearly 1.33 mW/C Derate Linearly 6.67 mW/C
Electrical absolute maximum ratings are at 25C
Electrical Characteristics
Parameter Output Characteristics @ 25C Operating Voltage Range Load Current, Continuous Off State Leakage Current On-State Voltage Drop Critical Rate of Rise 3 Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage 1 Operating Frequency Load Power Factor for Guaranteed Turn-On 2 Input Characteristics @ 25C Input Control Current 4 Input Drop-out Voltage Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance
1
Conditions VT VL=120Vrms V = 600V IL=500 mArms -
Symbol IL ILEAK VON dV/dt tON tOFF PF IF VF IR CI/O
Min 20 0.005 1000 20 0.25 0.8 0.9 -
Typ 2 1 0.23 1.2 3
Max 260 0.5 1 1.4 0.5 0.5 10 500 5 1.4 10 -
Units Vrms Arms mA Vrms V/s
IF=5 mA 1st half cycle Subsequent half cycle IF=5mA VR=5V -
cycles V Hz mA V V A pF
Zero Cross 1st half cycle @ <100Hz 2 Snubber circuits may be required at low power factors. 3 Tested in accordance with EIA/NARM standard RS-443. 4 For high noise environments use at least 10mA LED current.
2
www.clare.com
R04
CPC1963
PERFORMANCE DATA*
Typical LED Forward Voltage Drop (TA=25C, IF=5mA) Typical On-State Output Voltage Drop Distribution (TA=25C) Typical Blocking Voltage Distribution (TA=25C)
35 30
Device Count (N)
35 30 Device Count (N) 25 20 15 10 5 0
25 20 15 10 5 0
25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V)
Device Count (N)
1.05
1.06 1.07 1.08 1.09 1.10 Output Voltage Drop (Vrms)
1.11
610
620
630
640
650
660
670
Blocking Voltage (VP)
25 20 15 10 5 0
Typical IF for Switch Operation (TA=25C)
0.40 0.35
Typical IF for Switch Operation vs. Temperature
0.278 0.276 Leakage (mA) 0.274 0.272 0.270 0.268 0.266 0.264 25 40 55 70 85
Typical Leakage vs. Temperature (VL=600VP)
LED Current (mA)
Device Count (N)
0.30 0.25 0.20 0.15 0.10 0.05 0
0.21
0.22
0.23
0.24
0.25
0.26
0.27
25
40
55
70
85
LED Current (mA)
Temperature (C)
Temperature (C)
Typical Blocking Voltage vs. Temperature
670 1.10 1.08 1.06
Typical Output VON vs. Temperature
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop vs. Temperature
1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120
Blocking Voltage (VP)
660
VON (Vrms)
650 640 630 620 610
1.04 1.02 1.00 0.98 0.96
I F = 50mA I F = 20mA I F = 10mA I F = 5mA
25
40 55 70 Temperature (C)
85
25
40 55 70 Temperature (C)
85
Load Current, Free Air
1.2 Critical Rate of Rise (V/s) Load Current (Arms) 1.0 0.8 RJA=60 C/W 0.6 0.4 0.2 0 -40 0 55 85 Temperature (C) 1400 1200 1000 800
Typical dV/dt vs. Temperature
Vo
dV/dt Method
63% 600 400 200 0 0 25 50 85 Temperature (C) RC 10%
Vo = 300V dV 0.63 x 300V dt RC
189 RC
In accordance with EIA/NARM Standards RS-443 for Solid State Relays
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
R04
www.clare.com
3
CPC1963
Manufacturing Information
Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents.
Pb
RoHS
2002/95/EC
e3
MECHANICAL DIMENSIONS
6-Pin DIP Package
2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 0.127 (0.100 0.005)
PC Board Pattern (Top View)
9.144 0.508 (0.360 0.020)
9.652 0.381 (0.380 0.015)
0.254 TYP. (0.010 TYP.) 7.239 TYP. (0.285 TYP.) 6.350 0.127 (0.250 0.005)
7.620 0.127 (0.300 0.005)
5.080 0.127 (0.200 0.005)
4.064 TYP. (0.160 TYP.)
0.457 0.076 (0.018 0.003) 2.159 0.102 (0.085 0.004)
Dimensions mm (inches)
6-Pin Surface Mount Package
9.525 0.254 (0.375 0.010) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 9.652 0.381 (0.380 0.015) 3.302 0.051 (0.130 0.002) 4.445 0.127 (0.175 0.005)
Recommended PCB Land Pattern
2.54 (0.10) 0.65 (0.0256)
0.254 0.0127 (0.010 0.0005)
7.620 0.254 (0.300 0.010)
8.90 (0.350)
0.635 0.127 (0.025 0.005)
1.65 (0.065)
2.159 0.102 (0.085 0.004)
Dimensions mm (inches)
4
www.clare.com
R04
CPC1963
MECHANICAL DIMENSIONS (Cont.)
Tape and Reel Packaging for 6-Pin Surface Mount Package
330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Top Cover Tape P = 12.00 (0.472) Ao = 10.30 (0.406)
W = 16.30 max (0.642 max)
1
6
K0 = 4.90 (0.193) Embossed Carrier K1 = 4.20 (0.165)
Bo = 10.30 (0.406) Dimensions mm (inches)
User Direction of Feed
Embossment
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1963-R04 (c)Copyright 2009, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/28/09
5

▲Up To Search▲

Price & Availability of CPC1963GSTR

	To Download CPC1963GSTR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .