 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TPC6503 TOSHIBA Transistor Silicon NPN Epitaxial Type TPC6503 High-Speed Switching Applications DC-DC Converter Applications Strobe Applications * * * High DC current gain: hFE = 400 to 1000 (IC = 0.15 A) Low collector-emitter saturation voltage: VCE (sat) = 0.12 V (max) High-speed switching: tf = 45 ns (typ.) Unit: mm Absolute Maximum Ratings (Ta = 25C) Characteristic Collector-base voltage Collector-emitter voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range DC t = 10 s DC Pulse Symbol VCBO VCEX VCEO VEBO IC ICP IB PC (Note) Tj Tstg Rating 40 30 20 7 1.5 2.5 150 0.8 1.6 150 -55 to 150 Unit V V V V A mA JEDEC W C C 2-3S1A JEITA TOSHIBA Weight: 0.01 g (typ.) Note: Mounted on FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2) Electrical Characteristics (Ta = 25C) Characteristic Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Collector output capacitance Rise time Switching time Storage time Fall time Symbol ICBO IEBO V (BR) CEO hFE (1) hFE (2) VCE (sat) VBE (sat) Cob tr tstg tf Test Conditions VCB = 40 V, IE = 0 VEB = 7 V, IC = 0 IC = 10 mA, IB = 0 VCE = 2 V, IC = 0.15 A VCE = 2 V, IC = 0.5 A IC = 0.5 A, IB = 10 mA IC = 0.5 A, IB = 10 mA VCB = 10 V, IE = 0, f = 1 MHz See Figure 1 circuit diagram. VCC 12 V, RL = 24 - IB1 = -IB2 = 17 mA Min 20 400 200 Typ. 18 43 295 45 Max 100 100 1000 0.12 1.10 ns V V pF Unit nA nA V 1 2006-02-16 TPC6503 VCC 20 s IB1 IB1 RL Output Input IB2 IB2 Duty cycle < 1% Figure 1 Switching Time Test Circuit & Timing Chart Circuit Configuration Marking Lot code (month) Lot No. 6 5 4 Part No. (or abbreviation code) H2C Product-specific code Lot code (year) A line indicates lead (Pb)-free package or lead (Pb)-free finish. 1 2 3 Pin #1 2 2006-02-16 TPC6503 IC - VCE 1.5 20 15 10 8 6 10000 hFE - IC Common emitter VCE = 2 V Single nonrepetitive pulse Ta = 100C (A) DC current gain hFE 4 1 IB = 2 mA Collector current IC 1000 25 100 -55 0.5 0 0 Common emitter Ta = 25C Single nonrepetitive pulse 0.2 0.4 0.6 0.8 10 0.001 0.01 0.1 1 10 Collector-emitter voltage VCE (V) Collector current IC (A) VCE (sat) - IC 1 VBE (sat) - IC 10 Collector-emitter saturation voltage VCE (sat) (V) 0.1 Ta = 100C -55 Base-emitter saturation voltage VBE (sat) (V) Common emitter IC/IB = 50 Single nonrepetitive pulse Common emitter IC/IB = 50 Single nonrepetitive pulse 25 1 -55 25 0.01 Ta = 100C 0.001 0.001 0.01 0.1 1 10 0.1 0.001 0.01 0.1 1 10 Collector current IC (A) Collector current IC (A) IC - VBE 3 1.5 Common emitter VCE = 2 V Single nonrepetitive 1.2 pulse Collector current IC (A) 0.9 0.6 Ta = 100C 0.3 25 0 0 -55 0.3 0.6 0.9 1.2 1.5 Base-emitter voltage VBE (V) 3 2006-02-16 TPC6503 Transient Thermal Resistance 1000 rth - tw Transient thermal resistance rth (C/W) 100 10 Curves should be applied in thermal limited area. Single nonrepetitive = 25C Ta pulse Ta = 25C Mounted on FR4 FR4 board (glass epoxy, 1.6 mm thick, Cu area: 2 645 mm ) (645mm 2 x 1.6 mm, , Cu 645 mm2) 1 0.001 0.01 0.1 1 10 100 1000 Pulse width tw (s) Safe operating area 10 IC max (Pulse)* 10 ms* 1 ms* 100 s* 100 ms* 10 s* (A) IC max (Continuous)* 1 DC operation Ta = 25C Collector current IC *: Single nonrepetitive pulse Ta = 25C Note that the curves for 100 ms, 0.1 10 s and DC operation will be different when the device aren't mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2). Single-device operation These characteristic curves must be derated linearly with increase in temperature. 0.01 0.1 1 VCEO max 10 100 Collector-emitter voltage VCE (V) 4 2006-02-16 TPC6503 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-02-16 |
Price & Availability of TPC6503
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |