|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DIMM Socket For Memory Expansion Conforming To JEDEC Standard DMM Series, 168 Contacts Workstations, Computers, Disk arrays and Servers FEATURE Applicable to 168-position module per JEDEC Board locks which prevent the connector from Voltage keying design for both 5V and 3.3V Available with locking ejector on either side or Insulator molded from surface mount compatible Accepts DRAM, SDRAM and non-standard Straight plug in design minimizes bending of Low insertion force standard MO-161 lifting during reflow soldering modules both sides of connector plastic DRAM module module DRAM Type Voltage P/N DMM-168FLDA1-3A113 DMM-168FLDA1-3A133 DMM-168FLDA2-3A113 DMM-168FLDA2-3A133 DMM-168FLDA2-3A134 DMM-168FLDA2-3A13N DMM-168FLDA2-3A135 DMM-168FLDA2-3B133 DMM-168FLDA2-3B137 DMM-168FLDA2-3B13N DMM-168FLDA1-2A213 DMM-168FLDA2-2A213 DMM-168FLDA3-2A213 DMM-168FLDA4-2A213 DMM-168FLHB1-3A114 DMM-168FLHB1-3A134 DMM-168FLHB2-3A114 DMM-168FLHB2-3A133 DMM-168FLHB2-3A134 DMM-168FLEA1-3A113 DMM-168FLEA1-3A133 DMM-168FLEA1-3A13N DMM-168FLEA1-3A163 DMM-168FLEA2-3A113 DMM-168FLEA2-3A117 DMM-168FLEA2-3A133 DMM-168FLEA2-3A134 DMM-168FLEA2-3A137 DMM-168FLEA2-3A163 DMM-168FLEA3-3A117 DMM-168FLEA3-3A137 DMM-168FLFB1-3A116 DMM-168FLFB1-3A136 DMM-168FLFB2-2B214 DMM-168FLFB2-3A111 DMM-168FLFB2-3A116 DMM-168FLFB2-3A132 DMM-168FLFB2-3A133 DMM-168FLFB2-3A136 DMM-168FLAA1-1A233 DMM-168FLAA1-3A113 DMM-168FLAA1-3A133 DMM-168FLAA2-2A213 DMM-168FLAA2-2A233 DMM-168FLAA2-2A236 DMM-168FLAA2-2B212 DMM-168FLAA2-2B232 DMM-168FLAA2-2B233 DMM-168FLAA2-2B262 DMM-168FLAA2-2B263 DMM-168FLAA2-3A113 DMM-168FLAA2-3A116 DMM-168FLAA2-3A133 DMM-168FLAA2-3A136 DMM-168FLAA2-3A166 DMM-168FLAA2-3A13N DMM-168FLAA2-3B112 DMM-168FLAA2-3B133 DMM-168FLAA2-3B13N DMM-168FLAA2-3B162 DMM-168FLAA2-3A137 DMM-168FLAA2-3A163 DMM-168FLAA2-3A134 DMM-168FLAA3-1A233 DMM-168FLAA3-1A234 DMM-168FLAA3-3A113 DMM-168FLAA3-3A133 DMM-168FLAA3-3A136 DMM-168FLAA3-3A13N DMM-168FLAA3-1B212 DMM-168FLAA4-3A113 DMM-168FLAA4-3A133 DMM-168FLGB1-3A112 DMM-168FLGB1-3A132 DMM-168FLGB2-3A112 DMM-168FLGB2-3A132 SPECIFICATION Voltage rating Current rating Dielectric withstanding voltage Insulation resistance Contact resistance 250V AC (rms) 0.5A/contact 500V AC (rms) for 1 minute 500M min. at 500V DC 40mmax. 3.3V Sync. DRAM DMM(168) 5.0V MATERIAL/FINISH Contact/Finish Insulator Ejector Board lock Lock Copper alloy/Gold over Nickel plating (mating), Tin-lead plating (tail) Polyamide resin (UL94V-O)/Black Stainless steel Copper alloy/Solder plating Polyamide resin (UL94V-O)/Black Standard DRAM 3.3V 5.0V 3.3V Non-Standard DRAM 5.0V 1 DMM Series (168 Contacts) Unit : mm Sync. DRAM Operation Voltage 3.3V DMM-168FLDA2-3A23N Housing/Lock color 1 : Ivory/Ivory 2 : Black/Black 3 : Black/Ivory 4 : Ivory/Ivory Board lock and hole size N : without Board lock 3 : with 3 Board locks, 2.50 4 : with 4 Board locks, 2.50 5 : with 1 Board locks, 2.03 7 : with 3 Board locks, 2.03 holes holes holes holes Tail Pitch 2 : 1.27mm 3 : 1.905mm Tail Pitch Arrangement A : See page 3 B : See page 3 Contact plating 1 : Mating area0.3m Gold over Nickel Tail areaTin-Lead 3 : (Standard) Mating areaGold flash over Nickel Tail areaTin-Lead Tail Length 1 : 3.0mm 2 : 3.2mm 44.18 A 168 DDK THALAND 85 Contact No.168 7.30 1 DRAM 3.3V 84 DMM(168) Contact No.1 A 11.43 6.35 29x1.2736.83 6.35 147.00 128.35 43x1.2754.61 22.38 C1 L 11.40 MAX. 11.43 2.50 Lock pin 17.78 29x1.2736.83 43.18 60.96 141.00 B 43x1.2754.61 2.50 Lock pin 60.96 2.50 Lock pin 0.82 Contact No.1 Contact No.1 5.80 3.50 0.25 P (Tail pitch) (See P/N) L (Tail length) (See P/N) 6.60 1.27 1.27 Px3 DETAIL B-1 DMM-168FL - A DETAIL B-2 DMM-168FL - B SEC.A-A 2 DMM Series (168 Contacts) Unit : mm Sync. DRAM Operation Voltage 3.3V Mating board dimensions 133.35 0.13 127.35 C1 L 4.00 0.1 Device mounting area 4 MAX.REF. after device mouting 17.78 0.05 38.23 MAX. 3 DETAIL H 3 MIN. 11.43 0.05 3.175 REF. DETAIL G 6.35 0.05 DETAIL F 6.35 0.05 DETAIL J 23.00 0.1 1.27 REF. 36.83 44.18 0.1 63.675 115.57 REF. 131.35 0.05 54.61 0.05 Mating board dimensions (Reference) 4.00 MIN. R1 2.54 0.25 MAX. R1 1.00 C 1.00 L 1 3.12 DMM(168) 3.12 30 .0 2.00 0.1 2.00 0.1 3.3V DC 1.27 0.03 1.00 0.05 1.27 0.1 DETAIL G DETAIL F DETAIL J DETAIL H PCB mounting hole dimensions 42.50 0.05 168-0.8 0.05 60.96 0.10 Contact No.85 Contact No.168 60.96 0.10 0.25 C L C L 3 x P 0.05 P 0.05 1.27 0.05 43.18 0.05 6.35 0.05 36.83 0.05 11.43 0.05 3.175 6.35 0.05 57.79 0.05 Contact No.1 54.61 0.05 115.57 0.10 Lock pin DMM-168FLDA - A 168-0.8 0.05 42.50 0.05 PCB mounting hole dimensions (connector mounting side Reference) Contact No.168 60.96 0.10 Contact No.85 60.96 0.10 3 x P 0.05 P 0.05 1.27 0.05 43.18 0.05 6.35 0.05 36.83 0.05 11.43 0.05 3.175 6.35 0.05 57.79 0.05 Contact No.1 Lock pin 54.61 0.05 115.57 0.10 DMM-168FLDA - B PCB mounting hole dimensions (connector mounting side Reference) 3 DMM Series (168 Contacts) Unit : mm Sync. DRAM Operation Voltage 5.0V DMM-168FLHB2-3A134 Housing/Lock color 1 : Ivory/Ivory 2 : Black/Black Board lock and hole size N : without Board lock 3 : with 3 Board locks, 2.50 holes 4 : with 4 Board locks, 2.50 holes Contact plating 1 : Mating area0.3m Gold over Nickel Tail areaTin-Lead 3 : (Standard) Mating areaGold flash over Nickel Tail areaTin-Lead 43.18 A 168 DDK THALAND 85 Contact No.168 1 DRAM 3.3V 84 Contact No.1 A 11.43 6.35 29x1.2736.83 6.35 147.00 128.35 43x1.2754.61 7.30 DMM(168) 22.38 C1 L 11.40 MAX. 11.43 2.50 Lock pin 17.78 29x1.2736.83 43.18 60.96 141.00 B 43x1.2754.61 2.50 Lock pin 60.96 2.50 Lock pin 0.82 Contact No.1 Contact No.1 5.80 0.25 1.905 1.905x3 3.00 3.50 6.60 1.27 1.27 DETAIL B-1 DMM-168FL - A DETAIL B-2 DMM-168FL - B SEC.A-A 4 DMM Series (168 Contacts) Unit : mm Sync. DRAM Operation Voltage 5.0V Recommended mating board dimensions 133.35 0.13 127.35 C1 L 4.00 0.1 Device mounting area 4 MAX.REF. after device mouting 17.78 0.05 38.23 MAX. DETAIL H 3 3 MIN. 11.43 0.05 3.175 REF. DETAIL G 6.35 0.05 DETAIL F 6.35 0.05 DETAIL J 0.05 1.27 REF. 23.00 0.1 36.83 43.18 0.1 63.675 115.57 REF. 131.35 0.05 54.61 Recommended mating board dimensions (Reference) 0.25 MAX. DMM(168) R1 1.00 1.00 C1 L R1 2.54 4.00 MIN. 3.12 3.12 30 .0 2.00 0.1 2.00 0.1 5.0V DC 1.27 0.03 1.00 0.05 1.27 0.1 DETAIL G DETAIL F DETAIL J DETAIL H Recommended PCB mounting hole dimensions 42.50 0.05 168-0.8 0.05 60.96 0.10 Contact No.85 Contact No.168 60.96 0.10 0.25 C L 3 x P 0.05 0.05 1.27 0.05 43.18 0.05 6.35 0.05 3.175 6.35 0.05 57.79 0.05 P Contact No.1 36.83 0.05 11.43 0.05 115.57 0.10 54.61 0.05 Lock pin DMM-168FLHB - A Recommended PCB mounting hole dimensions (connector mounting side Reference) 5 DMM Series (168 Contacts) Unit : mm Standard DRAM Operation Voltage 3.3V DMM-168FLEA3-3A13N Housing/Lock color 1 : Ivory/Ivory 2 : Black/Black 3 : Black/Ivory Board lock and hole size N : without Board lock 3 : with 3 Board locks, 2.50 holes 4 : with 4 Board locks, 2.50 holes 7 : with 3 Board locks, 2.03 holes Contact plating 1 : Mating area0.3m Gold over Nickel Tail areaTin-Lead 3 : (Standard) Mating areaGold flash over Nickel Tail areaTin-Lead 6 : Mating area0.76m Gold over Nickel Tail areaTin-Lead 43.18 A 168 DDK THALAND 85 Contact No.168 1 DRAM 3.3V 84 7.30 Contact No.1 A 11.43 6.35 29x1.2736.83 6.35 147.00 128.35 43x1.2754.61 DMM(168) 22.38 C1 L 11.40 MAX. 11.43 2.50 Lock pin 17.78 29x1.2736.83 43.18 60.96 141.00 B 43x1.2754.61 2.50 Lock pin 60.96 2.50 Lock pin 0.82 Contact No.1 Contact No.1 5.80 0.25 1.60 1.60x3 3.00 3.50 6.60 1.27 1.27 DETAIL B-1 DMM-168FL - A DETAIL B-2 DMM-168FL - B SEC.A-A 6 DMM Series (168 Contacts) Unit : mm Standard DRAM Operation Voltage 3.3V Recommended mating board dimensions 133.35 0.13 127.35 C1 L 4.00 0.1 Device mounting area 4 MAX.REF. after device mouting 17.78 0.05 38.23 MAX. 3 DETAIL H 3 MIN. 11.43 0.05 3.175 REF. DETAIL G 6.35 0.05 DETAIL F 6.35 0.05 DETAIL J 0.05 1.27 REF. 23.00 0.1 36.83 43.18 0.1 63.675 115.57 REF. 131.35 0.05 54.61 Recommended mating board dimensions (Reference) 0.25 MAX. DMM(168) R1 1.00 1.00 C1 L R1 2.54 4.00 MIN. 3.12 3.12 30 .0 2.00 0.1 2.00 0.1 3.3V DC 1.27 0.03 1.00 0.05 1.27 0.1 DETAIL G DETAIL F DETAIL J DETAIL H Recommended PCB mounting hole dimensions 42.50 0.05 168-0.8 0.05 60.96 0.10 Contact No.85 Contact No.168 60.96 0.10 0.25 3 x P 0.05 P 0.05 1.27 0.05 43.18 0.05 6.35 0.05 3.175 6.35 0.05 57.79 0.05 Contact No.1 36.83 0.05 11.43 0.05 115.57 0.10 54.61 0.05 Lock pin DMM-168FLEA - A Recommended PCB mounting hole dimensions (connector mounting side Reference) 7 C L DMM Series (168 Contacts) Unit : mm Standard DRAM Operation Voltage 5.0V DMM-168FLFB2-3A136 Housing/Lock color 1 : Ivory/Ivory 2 : Black/Black Board lock and 1 : with 1 Board 2 : with 2 Board 3 : with 3 Board 4 : with 4 Board 6 : with 2 Board hole size locks, 2.50 locks, 2.50 locks, 2.50 locks, 2.50 locks, 2.03 holes holes holes holes holes Tail Pitch 2 : 1.27mm 3 : 1.905mm Tail Pitch Arrangement A : See page 9 B : See page 9 Contact plating 1 : Mating area0.3m Gold over Nickel Tail areaTin-Lead 3 : (Standard) Mating areaGold flash over Nickel Tail areaTin-Lead Tail Length 1 : 3.0mm 2 : 3.2mm 42.18 A 168 DDK THALAND 85 Contact No.168 7.30 1 DRAM 3.3V 84 DMM(168) Contact No.1 A 11.43 6.35 29x1.2736.83 6.35 147.00 128.35 43x1.2754.61 22.38 C1 L 11.40 MAX. 11.43 2.50 Lock pin 17.78 29x1.2736.83 43.18 60.96 141.00 B 43x1.2754.61 2.50 Lock pin 60.96 2.50 Lock pin 0.82 Contact No.1 Contact No.1 5.80 3.50 0.25 P (Tail pitch) (See P/N) L (Tail length) (See P/N) 6.60 1.27 1.27 Px3 DETAIL B-1 DMM-168FL - A DETAIL B-2 DMM-168FL - B SEC.A-A 8 DMM Series (168 Contacts) Unit : mm Standard DRAM Operation Voltage 5.0V Recommended mating board dimensions 133.35 0.13 127.35 C1 L 4.00 0.1 Device mounting area 4 MAX.REF. after device mouting 17.78 0.05 38.23 MAX. DETAIL H 3 3 MIN. 11.43 0.05 3.175 REF. DETAIL G 6.35 0.05 DETAIL F 6.35 0.05 DETAIL J 23.00 0.1 1.27 REF. 36.83 42.18 0.1 63.675 115.57 REF. 131.35 0.05 R1 1.00 1.00 C1 L 54.61 0.05 Recommended mating board dimensions (Reference) 4.00 MIN. R1 2.54 0.25 MAX. 3.12 DMM(168) 3.12 30 .0 2.00 0.1 2.00 0.1 5.0V DC 1.27 0.03 1.00 0.05 1.27 0.1 DETAIL G DETAIL F DETAIL J DETAIL H Recommended PCB mounting hole dimensions 42.50 0.05 168-0.8 0.05 Contact No.168 60.96 0.10 Contact No.85 60.96 0.10 0.05 P 0.05 1.27 0.05 43.18 0.05 6.35 0.05 36.83 0.05 11.43 0.05 3.175 6.35 0.05 57.79 0.05 3xP Contact No.1 54.61 0.05 115.57 0.10 Lock pin DMM-168FLFB - A 168-0.8 0.05 42.50 0.05 Recommended PCB mounting hole dimensions (connector mounting side Reference) Contact No.168 60.96 0.10 Contact No.85 60.96 0.10 3 x P 0.05 P 0.05 1.27 0.05 6.35 43.18 0.05 0.05 3.175 6.35 0.05 57.79 0.05 Contact No.1 36.83 0.05 11.43 0.05 54.61 0.05 115.57 0.10 Lock pin DMM-168FLFB - B Recommended PCB mounting hole dimensions (connector mounting side Reference) 9 C L C L 0.25 DMM Series (168 Contacts) Unit : mm Non-Standard DRAM Operation Voltage 3.3V DMM-168FLAA2-3B216 Housing/Lock color 1 : Ivory/Ivory 2 : Black/Black 3 : Black/Ivory 4 : Ivory/Ivory Board lock and hole size N : without Board lock 2 : with 2 Board locks, 2.50 3 : with 3 Board locks, 2.50 4 : with 4 Board locks, 2.50 6 : with 2 Board locks, 2.03 7 : with 3 Board locks, 2.03 holes holes holes holes holes Tail Pitch 1 : 1.60mm 2 : 1.27mm 3 : 1.905mm Tail Pitch Arrangement A : See page 11 B : See page 11 Contact plating 1 : Mating area0.3m Gold over Nickel Tail areaTin-Lead 3 : (Standard) Mating areaGold flash over Nickel Tail areaTin-Lead 6 : Mating area0.76m Gold over Nickel Tail areaTin-Lead Tail Length 1 : 3.0mm 2 : 3.2mm 42.18 A 168 DDK THALAND 85 Contact No.168 DMM(168) 1 DRAM 3.3V 84 Contact No.1 A 11.43 6.35 29x1.2736.83 6.35 147.00 128.35 43x1.2754.61 22.38 C1 L 7.30 11.40 MAX. 2.50 Lock pin Contact No.1 11.43 2.50 Lock pin 17.78 29x1.2736.83 43.18 60.96 141.00 2.50 Lock pin 43x1.2754.61 60.96 B 0.82 Contact No.1 5.80 3.50 0.25 P (Tail pitch) (See P/N) L (Tail length) (See P/N) 6.60 1.27 1.27 Px3 DETAIL B-1 DMM-168FL - A DETAIL B-2 DMM-168FL - B SEC.A-A 10 DMM Series (168 Contacts) Unit : mm Non-Standard DRAM Operation Voltage 3.3V Recommended mating board dimensions 133.35 0.13 127.35 C1 L 4.00 0.1 Device mounting area 4 MAX.REF. after device mouting 17.78 0.05 38.23 MAX. 3 DETAIL H 3 MIN. 11.43 0.05 3.175 REF. DETAIL G 6.35 0.05 DETAIL F 6.35 0.05 DETAIL J 23.00 0.1 1.27 REF. 36.83 42.18 0.1 63.675 115.57 REF. 131.35 0.05 54.61 0.05 Recommended mating board dimensions (Reference) 4.00 MIN. R1 2.54 0.25 MAX. R1 1.00 C 1.00 L 1 3.12 DMM(168) 3.12 30 .0 2.00 0.1 2.00 0.1 3.3V DC 1.27 0.03 1.00 0.05 1.27 0.1 DETAIL G DETAIL F DETAIL J DETAIL H Recommended PCB mounting hole dimensions 42.50 0.05 168-0.8 0.05 60.96 0.10 Contact No.85 Contact No.168 60.96 0.10 0.25 C L C L 3 x P 0.05 P 0.05 1.27 0.05 6.35 43.18 0.05 0.05 3.175 6.35 0.05 57.79 0.05 Contact No.1 36.83 0.05 11.43 0.05 54.61 0.05 115.57 0.10 Lock pin DMM-168FLAA - A 168-0.8 0.05 42.50 0.05 Recommended PCB mounting hole dimensions (connector mounting side Reference) Contact No.168 60.96 0.10 Contact No.85 60.96 0.10 3 x P 0.05 P 0.05 1.27 0.05 43.18 0.05 6.35 0.05 36.83 0.05 11.43 0.05 3.175 6.35 0.05 57.79 0.05 Contact No.1 54.61 0.05 115.57 0.10 Lock pin DMM-168FLAA - B Recommended PCB mounting hole dimensions (connector mounting side Reference) 11 DMM Series (168 Contacts) Unit : mm Non-Standard DRAM Operation Voltage 5.0V DMM-168FLGB1-3A132 Housing/Lock color 1 : Ivory/Ivory 2 : Black/Black Board lock and hole size N : without Board lock 2 : with 2 Board locks, 2.50 holes 3 : with 3 Board locks, 2.50 holes Contact plating 1 : Mating area0.3m Gold over Nickel Tail areaTin-Lead 3 : (Standard) Mating areaGold flash over Nickel Tail areaTin-Lead 41.18 A 168 DDK THALAND 85 Contact No.168 1 DRAM 3.3V 84 Contact No.1 A 11.43 6.35 29x1.2736.83 6.35 147.00 128.35 43x1.2754.61 7.30 DMM(168) 11.40 MAX. 22.38 C1 L 11.43 2.50 Lock pin 17.78 29x1.2736.83 43.18 60.96 141.00 2.50 Lock pin 43x1.2754.61 2.50 Lock pin 60.96 B 0.82 Contact No.1 Contact No.1 5.80 0.25 1.60 1.60x3 3.00 3.50 6.60 1.27 1.27 DETAIL B-1 DMM-168FL - A DETAIL B-2 DMM-168FL - B SEC.A-A 12 DMM Series (168 Contacts) Unit : mm Non-Standard DRAM Operation Voltage 5.0V Recommended mating board dimensions 133.35 0.13 127.35 C1 L 4.00 0.1 Device mounting area 4 MAX.REF. after device mouting 17.78 0.05 38.23 MAX. DETAIL H 3 3 MIN. 11.43 0.05 3.175 REF. DETAIL G 6.35 0.05 DETAIL F 6.35 0.05 DETAIL J 0.05 1.27 REF. 23.00 0.1 36.83 41.18 0.1 63.675 115.57 REF. 131.35 0.05 54.61 Recommended mating board dimensions (Reference) 0.25 MAX. DMM(168) R1 1.00 1.00 C1 L R1 2.54 4.00 MIN. 3.12 3.12 30 .0 2.00 0.1 2.00 0.1 5.0V DC 1.27 0.03 1.00 0.05 1.27 0.1 DETAIL G DETAIL F DETAIL J DETAIL H Recommended PCB mounting hole dimensions 42.50 0.05 168-0.8 0.05 60.96 0.10 Contact No.85 Contact No.168 60.96 0.10 0.25 C L 3 x P 0.05 0.05 1.27 0.05 43.18 0.05 6.35 0.05 3.175 6.35 0.05 57.79 0.05 P Contact No.1 36.83 0.05 11.43 0.05 115.57 0.10 54.61 0.05 Lock pin DMM-168FLHB - A Recommended PCB mounting hole dimensions (connector mounting side Reference) 13 |
Price & Availability of DMM-168FLEA1-3A113 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |