 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET CMOS INTEGRATED CIRCUIT PD5715GR CMOS MMIC 4 x 2 IF SWITCH MATRIX FEATURES * 4 independent IF channels, integral switching to channel input to either channel output * Integrated 4 bit decoder * Frequency range * High isolation D/U ratio * Insertion loss * Insertion loss flatness * Control voltage : f = 250 to 2 150 MHz : ISL = 29 dB TYP. : LINS = 6.7 dB TYP. @ZO = 50 : LINS = 0.7 dB TYP. : VCONT = 0 V/+3.3 V * 16-pin plastic HTSSOP package APPLICATIONS * DBS IF switching * Switch box * 4 x 2 switching application for microwave signal ORDERING INFORMATION Part Number Order Number Package Marking D5715 Supplying Form * Embossed tape 12 mm wide * Pin 8, 9 face the perforation side of the tape * Qty 3 kpcs/reel PD5715GR-E1 PD5715GR-E1-A 16-pin plastic HTSSOP (Pb-Free) Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PD5715GR Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PU10601EJ01V0DS (1st edition) Date Published May 2006 NS CP(K) Printed in Japan 2005, 2006 PD5715GR ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Supply Voltage Switch Control Voltage 1 to 4 Total Power Dissipation Input Power Operating Ambient Temperature Storage Temperature Symbol VDD VCONT1 to 4 Ptot Pin TA Tstg Ratings +4.6 +4.6 2 Note Unit V V W dBm C C +15 -40 to +85 -65 to +150 Note Mounted on double-sided copper-clad 50 x 50 x 1.6 mm epoxy glass PWB, TA = +85C RECOMMENDED OPERATING CONDITIONS (TA = +25C) Parameter Supply Voltage Control Voltage (H) Control Voltage (L) Note Symbol VDD VCONT (H) VCONT (L) MIN. +3.0 +3.0 -0.2 TYP. +3.3 +3.3 0 MAX. +3.6 +3.6 +0.4 Unit V V V Note VDD-0.4 V VCONT (H) VDD+0.2 V ELECTRICAL CHARACTERISTICS (TA = +25C, VDD = +3.3 V, VCONT = 0 V/+3.3 V, Pin = 0 dBm, ZO = 50 , each port, unless otherwise specified) Parameter Insertion Loss Insertion Loss Flatness Isolation D/U-ratio1 Isolation D/U-ratio2 Output Return Loss Control Current Note 2 Note 1 Symbol LINS Test Conditions f = 0.25 to 2.15 GHz LINS (0.95 GHz) - LINS (2.15 GHz) f = 0.25 to 0.95 GHz f = 0.95 to 2.15 GHz f = 0.25 to 2.15 GHz VDD = +3.3 V, VCONT = +3.3 V/0 V, non-RF MIN. - - 28 25 10 - - TYP. 6.7 0.7 34 29 13 0.01 MAX. 9.0 3.0 - - - 1 Unit dB dB dB dB dB LINS ISL1 ISL2 RLout ICONT Note 1 A A Supply Current IDD VDD = +3.3 V, VCONT = +3.3 V/0 V, non-RF 0.01 1 Notes 1. Isolation Desire Un-desire (D/U)-ratio = (Signal leakage (off-state)) - (Insertion loss (on-state)) 2. Per 1 control pin 2 Data Sheet PU10601EJ01V0DS PD5715GR PIN CONNECTIONS Pin No. Pin Name IN-C GND IN-D GND GND OUT2 VCONT3 VCONT4 Pin No. 16 15 14 13 12 11 10 9 Pin Name IN-B GND IN-A GND VDD OUT1 VCONT1 VCONT2 (Top View) 1 2 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 3 4 5 6 7 8 Remark Back side. : GND Data Sheet PU10601EJ01V0DS 3 PD5715GR TRUTH TABLE State No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Mode AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD IN-D IN-C IN-B Output Signal OUT1 IN-A OUT2 IN-A IN-B IN-C IN-D IN-A IN-B IN-C IN-D IN-A IN-B IN-C IN-D IN-A IN-B IN-C IN-D VCONT1 Low Low Low Low Low Low Low Low High High High High High High High High Control Pins VCONT2 Low Low Low Low High High High High Low Low Low Low High High High High VCONT3 Low Low High High Low Low High High Low Low High High Low Low High High VCONT4 Low High Low High Low High Low High Low High Low High Low High Low High Remark High : +3.3 Vdc, Low : 0 Vdc FUNCTIONAL DIAGRAM IN-B GND IN-A GND VDD OUT1 VCONT1VCONT2 16 9 1 4 : 16 DECODER 8 IN-C GND IN-D GND GND VCONT3VCONT4 OUT2 Remark Back Side : GND 4 Data Sheet PU10601EJ01V0DS PD5715GR EVALUATION CIRCUIT (VDD = +3.3 V, VCONT1 to VCONT4 = 0 V/+3.3 V, Pin = 0 dBm, ZO = 50 , DC Blocking Capacitor = 1 000 pF) VDD 1 000 pF OUT1 1 000 pF IN-A 1 000 pF IN-B 1 000 pF VCONT2 1 000 pF VCONT1 16 9 1 ZO = 50 IN-C 1 000 pF IN-D 1 000 pF (DC Blocking Condenser) 8 VCONT4 1 000 pF (RF Bypass Condenser) VCONT3 1 000 pF OUT2 Remark Back Side : GND ZO = 50 1 000 pF (DC Blocking Condenser) The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PU10601EJ01V0DS 5 PD5715GR ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD (Top View) (Bottom View) C1 C1 C1 C2 C2 C2 C2 C2 C1 C1 C1 Notes 1. 50 x 53 x 0.51 mm double sided copper clad RO4003 (Rogers) board (r = 3.38). 2. Au plated on pattern 3. : Through holes 4. C1, C2: 1 000 pF 6 Data Sheet PU10601EJ01V0DS PD5715GR TYPICAL CHARACTERISTICS (TA = +25C, VDD = +3.3 V, VCONT = 0 V/+3.3 V, Pin = 0 dBm, ZO = 50 , unless otherwise specified) INSERTION LOSS vs. FREQUENCY -4 Other mode -30 -5 -20 SIGNAL LEAKAGE vs. FREQUENCY SIGNAL LEAKAGE (dB) 3.0 Insertion Loss LINS (dB) -40 -50 -60 -70 -80 0.0 -6 -7 On channel mode : AA, BB, CC,DD -8 0.0 0.5 1.0 1.5 2.0 2.5 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (GHz) Frequency f (GHz) INPUT RETURN LOSS vs. FREQUENCY 0 Input deselected -10 OUTPUT RETURN LOSS vs. FREQUENCY 0 Output Return Loss RLout (dB) 2.5 3.0 Input Return Loss RLin (dB) -10 -20 -20 Input selected -30 -30 -40 -40 0.0 0.5 1.0 1.5 2.0 -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (GHz) Frequency f (GHz) Remark The graphs indicate nominal characteristics. Data Sheet PU10601EJ01V0DS 7 PD5715GR INSERTION LOSS vs. ON CHANNEL MODE 0.0 f = 0.25 GHz -1.0 Insertion Loss LINS (dB) INSERTION LOSS vs. ON CHANNEL MODE 0.0 f = 0.95 GHz -1.0 Insertion Loss LINS (dB) -2.0 -3.0 -4.0 -5.0 -6.0 -7.0 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE -2.0 -3.0 -4.0 -5.0 -6.0 -7.0 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE INSERTION LOSS vs. ON CHANNEL MODE 0.0 f = 1.50 GHz -1.0 Insertion Loss LINS (dB) INSERTION LOSS vs. ON CHANNEL MODE 0.0 f = 2.15 GHz -1.0 Insertion Loss LINS (dB) -2.0 -3.0 -4.0 -5.0 -6.0 -7.0 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE -2.0 -3.0 -4.0 -5.0 -6.0 -7.0 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE Remark The graphs indicate nominal characteristics. 8 Data Sheet PU10601EJ01V0DS PD5715GR ISOLATION D/U-RATIO vs. ON CHANNEL MODE 0 f = 0.25 GHz Isolation D/U-Ratio ISL (dB) Isolation D/U-Ratio ISL (dB) ISOLATION D/U-RATIO vs. ON CHANNEL MODE 0 f = 0.95 GHz -10 -20 -30 -40 -50 -60 -10 -20 -30 -40 -50 -60 -70 -80 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE ISOLATION D/U-RATIO vs. ON CHANNEL MODE 0 -5 Isolation D/U-Ratio ISL (dB) ISOLATION D/U-RATIO vs. ON CHANNEL MODE 0 -5 Isolation D/U-Ratio ISL (dB) f = 1.50 GHz f = 2.15 GHz -10 -15 -20 -25 -30 -35 -40 -45 -50 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE -10 -15 -20 -25 -30 -35 -40 -45 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE Remark The graphs indicate nominal characteristics. Data Sheet PU10601EJ01V0DS 9 PD5715GR OUTPUT RETURN LOSS vs. ON CHANNEL MODE 0 f = 0.25 GHz 0 f = 0.95 GHz OUTPUT RETURN LOSS vs. ON CHANNEL MODE Output Return Loss RLout (dB) -5 -10 -15 -20 -25 -30 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE Output Return Loss RLout (dB) -5 -10 -15 -20 -25 -30 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE OUTPUT RETURN LOSS vs. ON CHANNEL MODE 0 f = 1.50 GHz 0 OUTPUT RETURN LOSS vs. ON CHANNEL MODE f = 2.15 GHz Output Return Loss RLout (dB) -5 -10 -15 -20 -25 -30 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE Output Return Loss RLout (dB) -5 -10 -15 -20 -25 -30 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE Remark The graphs indicate nominal characteristics. 10 Data Sheet PU10601EJ01V0DS PD5715GR PACKAGE DIMENSIONS 16-PIN PLASTIC HTSSOP (UNIT: mm) 6.40.3 0.200.10 (1.8) 0.650.1 (0.4) 9 8 0.200.10 5.50.3 16 1 (0.1) 5.20.2 0.90.2 (2.5) (1.5) (2.7) (0.5) Data Sheet PU10601EJ01V0DS 11 PD5715GR RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Partial Heating Peak temperature (terminal temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 Condition Symbol IR260 For soldering Caution Do not use different soldering methods together (except for partial heating). 12 Data Sheet PU10601EJ01V0DS PD5715GR * The information in this document is current as of May, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PU10601EJ01V0DS 13 PD5715GR For further information, please contact NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ 0604 |
Price & Availability of UPD5715GR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |