View CPH6530_4403828.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : EN8709
CPH6530
PNP / NPN Epitaxial Planar Silicon Transistor
CPH6530
Applications
*
Low-Frequency General-Purpose Applications
Muting circuit, relay drivers, lamp drivers, motor drivers.
Features
* *
Composite type with a PNP / NPN transistor contained in one package, facilitating high-density mounting. Ultrasmall package permitting applied sets to be small and slim.
Specifications ( ) : PNP
Absolute Maximum Ratings at Ta=25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Mounted on a ceramic board (600mm2!0.8m) 1unit Conditions Ratings (--15)60 (--12)50 (--)5 (--1)0.5 (--2)1 0.6 150 --55 to +150 Unit V V V A A W C C
Electrical Characteristics at Ta=25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO Conditions VCB=(--12)40V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(--)10mA VCE=(--2)10V, IC=(--)50mA VCB=(--)10V, f=1MHz IC=(--400)100mA, IB=(--20)10mA IC=(--400)100mA, IB=(--20)10mA IC=(--)10A, IE=0A IC=(--)1mA, RBE= IE=(--)10A, IC=0A (--15)60 (--12)50 (--)5 Ratings min typ max (--)100 (--)100 300 (450)500 (6)2.8 (--120)50 (--240)100 (--)0.9 (--)1.2 (700)800 MHz pF mV V V V V Unit nA nA
Marking : EQ
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D2805EA MS IM TB-00001960 No.8709-1/5
CPH6530
Package Dimensions unit : mm 7018-006
0.4 0.15
Electrical Connection
6
5
4
6
5
4
0.6 0.2
0.6
1.6
2.8
0.05
1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1
Top view
1
2
3
1
0.95
2
2.9
3
0.7
1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : CPH6
0.2 0.9
mA
mA
--30
--900
--1
--7mA
Collector Current, IC -- mA
450 400 350 300 250
A1 5m
A 10 5m --
mA
A
--1000
IC -- VCE
[PNP]
500
IC -- VCE
7mA
1 0mA
[NPN]
Collector Current, IC -- mA
--5mA
--3mA --2mA
20m
--800 --700 --600 --500 --400 --300 --200 --100 0 0
--20
8mA
5mA
3mA
30mA
2mA
1mA
200 150 100 50
600A
200A
--1mA
--0.5mA
IB=0mA
--100 --200 --300 --400 --500 --600 --700 --800 --900 --1000
0 0
IB=0A
100 200 300 400 500 600 700 800 900 1000
Collector-to-Emitter Voltage, VCE -- mV
--1200
IT05094
IC -- VBE
Collector-to-Emitter Voltage, VCE -- mV
600
IT05106
[PNP] VCE= --2V
IC -- VBE
[NPN] VCE=2V
--1000
500
Collector Current, IC -- mA
Collector Current, IC -- mA
--800
400
Ta= 75C 2 5C
--600
300
--200
--25 C
--400
200
100
0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT05095
0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT05107
Base-to-Emitter Voltage, VBE -- V
Base-to-Emitter Voltage, VBE -- V
Ta=7 5C 25C --25C
No.8709-2/5
CPH6530
1000
hFE -- IC
[PNP]
VCE= --2V
1000 7 5
hFE -- IC
Ta=75C
25C --25C
[NPN]
VCE=2V
7
Ta=75C
DC Current Gain, hFE
5
DC Current Gain, hFE
25C
--25C
3 2
3
100 7 5 3 2
2
100 --1.0
2
3
5 7 --10
2
3
5 7 --100
2
3
Collector Current, IC -- mA
--1000 7 5 3 2 --100 7 5 3 2 --10 7 5 3 2 --1.0 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3
5 7--1000 IT05096
10 1.0
2
3
5 7 10
2
3
5 7 100
2
3
5 7 1000 IT05108
VCE(sat) -- IC
Collector Current, IC -- mA
3
[PNP]
IC / IB=20
VCE(sat) -- IC
[NPN]
IC / IB=10
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
2
100
25
C
C 75 Ta= 5C --2
5 3 2
10 7
Collector Current, IC -- mA
--1000 7
5 7--1000 IT05097
5 1.0
2
3
5 7 10
2
3
--2
5 7 100
5 C
25
C
Ta =7 5 C
2
7
3
5 7 1000 IT05411
VCE(sat) -- IC
Collector Current, IC -- mA
3
[PNP]
IC / IB=50
VCE(sat) -- IC
[NPN]
IC / IB=20
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
5 3 2
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
2
100
Ta =
7 5
--100 7 5 3 2
C 25
= Ta 5C --2
C 75
25
3 2
--10 --1.0
2
3
5 7 --10
2
3
5 7 --100
2
3
5 7--1000 IT05098
10 1.0
2
3
5 7 10
2
3
5 7 100
--2
2 3
C
5 C
75 C
5 7 1000 IT05109
Collector Current, IC -- mA
--10 7
VBE(sat) -- IC
Collector Current, IC -- mA
1000 7
[PNP] IC / IB=20
VCE(sat) -- IC
[NPN] IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
Base-to-Emitter Saturation Voltage, VBE(sat) -- V
5 3 2
5 3 2
--1.0 7 5 3 2
25C
Ta= --25C
75C
100 7 5 3 2
25
C
= Ta
C 75
--2
C 5
--0.1 --1.0
2
3
5 7 --10
2
3
5 7 --100
2
3
Collector Current, IC -- mA
5 7--1000 IT05099
10 1.0
2
3
5 7 10
2
3
5 7 100
2
3
5 7 1000 IT05110
Collector Current, IC -- mA
No.8709-3/5
CPH6530
3 2
Cob -- VCB
[PNP] f=1MHz
Base-to-Emitter Saturation Voltage, VBE(sat) -- V
10 7 5 3 2
VBE(sat) -- IC
[NPN] IC / IB=20
Output Capacitance, Cob -- pF
10 7 5
1.0 7 5 3 2
25C
Ta= --25C
75C
3 2
1.0 --1.0
2
3
5
7
--10
2
3
0.1 1.0
2
3
5 7 10
2
3
5 7 100
2
3
Collector-to-Base Voltage, VCB -- V
1000 7
IT05100
fT -- IC
Collector Current, IC -- mA
10
5 7 1000 IT05111
[PNP] VCE= --2V
Output Capacitance, Cob -- pF
7
Cob -- VCB
[NPN] f=1MHz
Gain-Bandwidth Product, fT -- MHz
5 3 2
5
100 7 5 3 2
3
2
10 --1.0
2
3
5 7 --10
2
3
5 7 --100
2
3
Collector Current, IC -- mA
3 2 --1.0
5 7--1000 IT05101
1.0 1.0
2
3
5
7
10
2
3
5
7
100
ASO
ICP= --2A
50
10 0
Collector-to-Base Voltage, VCB -- V
1000
IT05112
[PNP]
Gain-Bandwidth Product, fT -- MHz
fT -- IC
[NPN] VCE=10V
IC= --1A
10
s
Collector Current, IC -- A
7 5 3 2 --0.1 7 5 3 2
10
DC op
ms
7
0 s
0m
s
5
1m
er
ati
s
on
3
2
--0.01 --0.1
Ta=25C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 1unit
2 3 5 7 --1.0 2 3 5 7 --10 2 3
100 1.0
2
3
5 7 10
2
3
5 7 100
2
3
5 7 1000 IT05113
0.7
Collector-to-Emitter Voltage, VCE -- V IT10001 [PNP/NPN] PC -- Ta
Collector Current, IC -- mA
2 1.0
ASO
[NPN]
ICP=1.0A
s 0 10 s 0 50
0.6
Collector Dissipation, PC -- W
M
Collector Current, IC -- A
ou
0.5
nt
7 5 3 2 0.1 7 5 3
ed
IC=0.5A
D
on
10
C
m
ac
s
0.4
er
am
10
op er
ic
0m
io
bo
s
1m
0.3
ar
s
d
(6
at
00
n
m
0.2
m2 !
0.
8m
m
0.1 0 0 20 40 60 80 100 120
)1
un
it
160
2
140
Ambient Temperature, Ta -- C
0.01 0.1
Ta=25C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 1unit
2 3 5 7 1.0 2 3 5 7 10 2 3 5 7
IT10000
Collector-to-Emitter Voltage, VCE -- V
IT10002
No.8709-4/5
CPH6530
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice.
PS No.8709-5/5

▲Up To Search▲

Price & Availability of CPH6530

	To Download CPH6530 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .