|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Datasheet DLPVA-100-F Series Variable Gain Low Frequency Voltage Amplifier Features Variable Gain 20 to 80 dB, Switchable in 20 dB Steps FET Input Stage, 1 T Impedance Protection against 3 kV Transients Single Ended and True Differential Input Models Bandwidth DC - 100 kHz, Switchable to 1 kHz 1.3 V/C DC-Drift 120 dB CMRR 5.5 nV/Hz Input Noise Switchable AC/DC-Coupling Local and Remote Control Universal Laboratory Amplifier Automated Measurements Industrial Sensors Detector Preamplifier Integrated Measurement Systems Low Noise, Low Drift Input Stage Programmable AC / DC Coupling Programmable Gain Amplifier Programmable Gain Amplifier Programmable Lowpass-Filter f-3dB = 1/100 kHz Applications INPUT 20 dB 0 dB 20 dB 0 dB 40 dB OUTPUT Parameter Control Unit Supply Voltage Regulator IN (+/-15V) POWER SUPPLY Manual Switch Optocoupler Isolate Unit OUT (+/-12V, +5V) OFFSET ADJUST INPUT / TRIMMER DIG. CONTROL INPUTS POWER SUPPLY OUTPUT BS01-0440-19 DE-DLPVA-100-F/SP/R4/13OCT05/Page1 of 6 SOPHISTICATED TOOLS FOR SIGNAL RECOVERY Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr Datasheet DLPVA-100-F Series Variable Gain Low Frequency Voltage Amplifier Specifications Gain Test Conditions Gain Values Gain Accuracy Gain Flatness Vs = 15 V, Ta = 25C 20, 40, 60, 80 dB indicated by four LEDs 0.1 % (between settings) 1% (overall) 0.1 dB DC, switchable to 1.5 Hz 100 kHz, switchable to 1 kHz 12 dB/Oct. 3.5 s (@ BW = 100 kHz) 350 s (@ BW = 1 kHz) 1 T 1.3 V/K DLPVA-100-F-D Gain Setting DLPVA-100-F-S 60, 80 dB 5.5 nV/Hz 6.9 nV/Hz 40 dB 8 nV/Hz 10 nV/Hz 20 dB 60 nV/Hz 60 nV/Hz 1.6 fA/Hz 80 Hz 1 pA Factor 2.3 / 10 C 5 mV, adjustable by offset trimmer and external control voltage Frequency Response Lower Cut-Off Frequency Upper Cut-Off Frequency Upper Cut-Off Frequency Rolloff Rise / Fall Time (10% - 90%) Time Response Input Input Impedance Input Voltage Drift Equivalent Input Voltage Noise Equivalent Input Current Noise 1/f-Noise Corner Input Bias Current Input Bias Current Drift Input Offset Voltage Single Ended Input, Model "DLPVA-100-F-S" only: Input Voltage Range for linear Amplification: 0.6 V True Differential Input, Model "DLPVA-100-F-D" only: Common Mode Voltage Range 5V CMRR 120 dB (@ 100 Hz) 100 dB (@ 10 kHz) 80 dB (@ 60 kHz) Output Output Impedance Output Voltage Range For Linear Amplification Output Current (max.) Output Overload Recovery Time 50 (terminate with > 10 k load for best performance) 10 V (@ > 10 k load) 20 mA 0.5 ms (after 20x overload) Page 2 SOPHISTICATED TOOLS FOR SIGNAL RECOVERY Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr Datasheet DLPVA-100-F Series Variable Gain Low Frequency Voltage Amplifier Overload LED The amplifier features a LED to signalize an overload condition. The Overload LED will turn on if the signal level within the signal path exceeds the linear operating range. In order to ensure the correct operation of the amplifier without signal distortions reduce the gain setting until the Overload LED turns off. The Overload LED may also turn on under the following operating conditions: - The amplifier is operated with open input or with a high source impedance. For proper operation please use a source impedance of less than 100 M or switch to a lower gain setting. - When using a DLPVA-F-D with differential input stage the Overload LED may turn on if the common mode input voltage exceeds 5 V or if the source is totally floating with respect to the amplifier ground. For proper operation make sure that the common mode voltage stays within 5 V with respect to the amplifier ground and make a valid connection between the source ground and the amplifier ground to ensure that the inputs cannot drift outside the tolerable common mode range. Remote Offset Control Offset Control Voltage Range Offset Control Input Impedance Control Input Voltage Range Control Input Current Overload Output 10 V, corresponds to 5 mV input offset 200 k Low: - 0.8 ...+ 0.8 V High: + 1.8 ... + 12 V, TTL / CMOS compatible 0 mA @ 0 V, 1.5 mA @ + 5 V, 4.5 mA @ + 12 V Non active: + 5 V, max. 1 mA, active: 0.8 V, max. -10 mA 15 V ( 14.5 V to 16 V) 75 mA typ. (depends on operating conditions, recommended power supply capability minimum 150 mA) 0.32 kg (0.7 lbs) AlMg4.5Mn, nickel-plated - 40 C to + 100 C 0 C to + 60 C 21 V + 16 V / - 5 V 15 Vp 3 kV (discharge from 5 nF source) Remote Digital Control Power Supply Supply Voltage Supply Current Case Temperature Range Weight Material Storage Temperature Operating Temperature Power Supply Voltage Control Input Voltage Signal Input Voltage Transient Input Voltage Absolute Maximum Ratings Page 3 SOPHISTICATED TOOLS FOR SIGNAL RECOVERY Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr Datasheet DLPVA-100-F Series Variable Gain Low Frequency Voltage Amplifier Connectors Input Single Ended Input, Model "DLPVA-100-F-S": BNC True Differential Input, Model "DLPVA-100-F-D": LEMO series 1S, 4-pin fixed socket Pin 1: non inverting input Pin 2: inverting input Pin 3: GND Pin 4: N.C. Output Power Supply BNC LEMO series 1S, 3-pin fixed socket Pin 1: + 15V Pin 2: - 15V Pin 3: GND PIN 2 -Vs PIN 1 +Vs PIN 3 GND Control Port Sub-D 25-pin, female, qual. class 2 Pin 1: +12 V (stabilized power supply output, max. 100 mA) Pin 2: -12 V (stabilized power supply output, max. 100 mA) Pin 3: AGND (analog ground) Pin 4: +5 V (stabilized power supply output, max. 50 mA) Pin 5: digital output: overload Pin 6: NC Pin 7: NC Pin 8: offset control voltage input Pin 9: DGND (ground f. digital control Pin 10 - 25) Pin 10: NC Pin 11: digital control input: gain, LSB Pin 12: digital control input: gain, MSB Pin 13: digital control input: AC/DC Pin 14: digital control input: 100 kHz / 1 kHz Pin 15 - 25: NC Page 4 SOPHISTICATED TOOLS FOR SIGNAL RECOVERY Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr Datasheet DLPVA-100-F Series Variable Gain Low Frequency Voltage Amplifier Remote Control Operation General Remote control input bits are opto-isolated and connected by logical OR to local switch setting. For remote control a switch setting, set the corresponding local switch to "0 dB", "AC" and "1 kHz" and select the wanted setting via a bit-code at the corresponding digital inputs. Mixed operation, e.g. local gain setting and remote controlled bandwidth setting, is also possible. Gain Pin 11 Pin 12 20 dB low low 40 dB high low 60 dB low high 80 dB high high Coupling Pin 13 AC low DC high Bandwidth Pin 14 1 kHz low 100 kHz high Gain Setting AC/DC Setting Bandwidth Setting Typical Performance Characteristics Frequency Response (Logarithmic) Page 5 SOPHISTICATED TOOLS FOR SIGNAL RECOVERY Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr Datasheet DLPVA-100-F Series Variable Gain Low Frequency Voltage Amplifier Dimensions 157 mm 150 mm 137 mm 15 mm IN OUT 44 mm 51 mm DZ01-0440-18 20 mm 18 mm POWER 31 mm 51 mm 79 mm 86 mm 107 mm 3.3 mm 19 mm Ordering Information Available Models Model No.: DLPVA-100-F-S - FET, singe-ended input (BNC-connector input) Model No.: DLPVA-100-F-D - FET, true differential input (LEMO-connector input) 12/07 / V1 / HW / femto/voltage/ DLPVA-100-F.pdf www.lasercomponents.com Specifications are subject to change without notice. Information furnished herin is believed to be accurate and reliable. However, no responsibility is assumed by FEMTO Messtechnik GmbH for its use, nor for any infringement of patents or other rights granted by implication or otherwise under any patent rights of FEMTO Messtechnik GmbH. Product names mentioned may also be trademarks used here for identification purposes only. (c) by FEMTO Messtechnik GmbH Printed in Germany 14 mm SOPHISTICATED TOOLS FOR SIGNAL RECOVERY Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: LASER COMPONENTS S.A.S., Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@lasercomponents.fr 27 mm Page 6 |
Price & Availability of DLPVA-100-F |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |