View VO2611-X006_4327877.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

6N137, VO2601, VO2611, VO2630, VO2631, VO4661
Vishay Semiconductors
High Speed Optocoupler, 10 MBd
FEATURES
* Choice of CMR performance of 15 kV/s, 5 kV/s, and 100 V/s * High speed: 10 Mbd typical * + 5 V CMOS compatibility
Single channel Dual channel
* Pure tin leads
8 7 6 5
NC A C NC
1 2 3 4
8 7 6 5
VCC VE VO GND
A1 1 C1 C2 A2
2 3 4
VCC VO1 VO2 GND
* Guaranteed AC and DC performance over temperature: - 40 C to + 100 C temperature range * Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements * Low input current capability: 5 mA * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
6N137, VO2601, VO2611
18921-15
VO2630, VO2631, VO4661
DESCRIPTION
The 6N137, VO2601 and VO2611 are single channel 10 Mbd optocouplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. The VO2630, VO2631 and VO4661 are dual channel 10 MBd optocouplers. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/s for the VO2601 and VO2631 and 15 kV/s for the VO2611 and VO4661. The use of a 0.1 F bypass capacitor connected between pin 5 and 8 is recommended.
APPLICATIONS
* Microprocessor system interface * PLC, ATE input/output isolation * Computer peripheral interface * Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS * High speed A/D and D/A conversion * AC plasma display panel level shifting * Multiplexed data transmission * Digital control power supply * Ground loop elimination
AGENCY APPROVALS
* UL1577, file no. E52744 system code H or J, double protection * CUL - file no. E52744, equivalent to CSA bulletin 5A * DIN EN 60747-5-5 (VDE 0884) available with option 1 * BSI IEC 60950
ORDER INFORMATION
PART 6N137 6N137-X006 6N137-X007 VO2601 VO2601-X006 VO2601-X007 VO2611 VO2611-X006 VO2611-X007 VO2630 VO2630-X006 VO2630-X007 VO2631 VO2631-X006 REMARKS 100 V/s, single channel, DIP-8 100 V/s, single channel, DIP-8 400 mil 100 V/s, single channel, SMD-8 5 kV/s, single channel, DIP-8 5 kV/s, single channel, DIP-8 400 mil 5 kV/s, single channel, SMD-8 15 kV/s, single channel, DIP-8 15 kV/s, single channel, DIP-8 400 mil 15 kV/s, single channel, SMD-8 100 V/s, dual channel, DIP-8 100 V/s, dual channel, DIP-8 400 mil 100 V/s, dual channel, SMD-8 5 kV/s, dual channel, DIP-8 5 kV/s, dual channel, DIP-8 400 mil
www.vishay.com 174
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84732 Rev. 1.3, 06-Oct-08
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
High Speed Optocoupler, 10 MBd
Vishay Semiconductors
ORDER INFORMATION
PART VO2631-X007 VO4661 VO4661-X006 VO4661-X007 Note For additional information on the available options refer to option information. REMARKS 5 kV/s, dual channel, SMD-8 15 kV/s, dual channel, DIP-8 15 kV/s, dual channel, DIP-8 400 mil 15 kV/s, dual channel, SMD-8
TRUTH TABLE (Positive Logic)
LED ON OFF ON OFF ON OFF ENABLE H H L L NC NC
(1)
OUTPUT L H H H L H
ABSOLUTE MAXIMUM RATINGS
PARAMETER INPUT Average forward current (single channel) Average forward current (per channel for dual channel) Reverse input voltage Enable input voltage Enable input current Surge current Output power dissipation (single channel) Output power dissipation (per channel for dual channel) OUTPUT Supply voltage Output current Output voltage Output power dissipation (single channel) Output power dissipation (per channel for dual channel) COUPLER Isolation test voltage Storage temperature Operating temperature Lead solder temperature Solder reflow temperature (2)
TEST CONDITION
SYMBOL
VALUE
UNIT
IF IF VR VE IE t = 100 s IFSM Pdiss Pdiss
20 15 5 VCC + 0.5 V 5 200 35 25
mA mA V V mA mA mW mW
1 min maximum
VCC IO VO Pdiss Pdiss
7 50 7 85 60
V mA V mW mW
t = 1.0 s
VISO Tstg Tamb
5300 - 55 to + 150 - 40 to + 100 260 260
VRMS C C C C
for 10 s
Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). Document Number: 84732 Rev. 1.3, 06-Oct-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 175
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
Vishay Semiconductors
High Speed Optocoupler, 10 MBd
RECOMMENDED OPERATING CONDITIONS
PARAMETER Operating temperature Supply voltage Input current low level Input current high level Logic high enable voltage Logic low enable voltage Output pull up resistor Fanout RL = 1 k TEST CONDITION SYMBOL Tamb VCC IFL IFH VEH VEL RL N MIN. - 40 4.5 0 5 2 0 330 MAX. 100 5.5 250 15 VCC 0.8 4K 5 UNIT C V A mA V V -
ELECTRICAL CHARACTERISTICS
PARAMETER INPUT Input forward voltage Reverse current Input capacitance OUTPUT High level supply current (single channel) High level supply current (dual channel) Low level supply current (single channel) Low level supply current (dual channel) High level output current Low level output voltage Input threshold current High level enable current Low level enable current High level enable voltage Low level enable voltage VE = 0.5 V, IF = 0 mA VE = VCC, IF = 0 mA IF = 0 mA VE = 0.5 V, IF = 10 mA VE = VCC, IF = 10 mA IF = 10 mA VE = 2 V, VO = 5.5 V, IF = 250 A VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA VE = 2 V, VO = 5.5 V, IOL (sinking) = 13 mA VE = 2 V VE = 0.5 V ICCH ICCH ICCH ICCL ICCL ICCL IOH VOL ITH IEH IEL VEH VEL 2 0.8 4.1 3.3 6.5 4.0 3.3 6.5 0.002 0.2 2.4 - 0.6 - 0.8 7.0 6.0 12.0 7.0 6.0 12.0 1 0.6 5.0 - 1.6 - 1.6 mA mA mA mA mA mA A V mA mA mA V V IF = 10 mA VR = 5 V f = 1 MHz, VF = 0 V VF IR CI 1.1 1.4 0.01 55 1.7 10 V A pF TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements.
www.vishay.com 176
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84732 Rev. 1.3, 06-Oct-08
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
High Speed Optocoupler, 10 MBd
Vishay Semiconductors
SWITCHING CHARACTERISTICS
PARAMETER Propagation delay time to high output level Propagation delay time to low output level Pulse width disortion Propagation delay skew Output rise time (10 to 90 %) Output fall time (90 to 10 %) Propagation delay time of enable from VEH to VEL Propagation delay time of enable from VEL to VEH
(1)
TEST CONDITION RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V
SYMBOL tPLH tPLH tPHL tPHL |tPHL - tPLH| tPSK tr tf tELH tEHL
MIN. 20 25
TYP. 48 50 2.9 8 23 7 12 11
MAX. 75 (2) 100 75 (2) 100 35 40
UNIT ns ns ns ns ns ns ns ns ns ns
Notes (1) Over recommended temperature (T amb = - 40 C to + 100 C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at Tamb = 25 C, VCC = 5 V. (2) 75 ns applies to the 6N137 only, a JEDEC registered specification
VCC Single channel Pulse gen. Zo = 50 t f = t r = 5 ns Input IF monitoring node RM 1 IF 2 3 4 GND VCC 8 VE 7 VOUT 6 5 RL 0.1 F bypass Input IF Output VO monitoring node C L = 15 pF t PHL The probe and Jig capacitances are included in C L t PLH
18964-2
IF = 7.5 mA IF = 3.75 mA 0 mA VOH 1.5 V VOL
Output VO
Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf
Pulse gen. Zo = 50 t f = t r = 5 ns IF 1 Input monitoring node RM 2 3 4
18963-5
VCC Dual channel VCC 8 7 6 GND 5 0.1 F bypass RL Output VO monitoring node
CL= 15 pF
Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf
Document Number: 84732 Rev. 1.3, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 177
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
Vishay Semiconductors
High Speed Optocoupler, 10 MBd
Pulse gen. Zo = 50 t f = t r = 5 ns 1 7.5 mA IF 2 3 4
Input VE monitoring node Single channel VCC 8 VE 7 VOUT 6 GND 5
VCC
RL 0.1 F bypass Output VO monitoring node CL = 15 pF Input VE tEHL tELH Output VO
3V 1.5 V
1.5 V
The probe and Jig capacitances are included in CL
Fig. 3 - Single Channel Test Circuit for tEHL, and tELH
18975-2
COMMON MODE TRANSIENT IMMUNITY
PARAMETER TEST CONDITION |VCM| = 10 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (1) |VCM| = 50 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (2) Common mode transient immunity (high) |VCM| = 1 kV, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 C (3) |VCM| = 10 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (1) |VCM| = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (2) |VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 C (3) Notes (1) For 6N137 and VO2630 (2) For VO2601 and VO2631 (3) For VO2611 and VO4661 SYMBOL |CMH| |CMH| |CMH| |CML| |CML| |CML| MIN. 100 5000 15 000 100 5000 15 000 10 000 25 000 10 000 25 000 TYP. MAX. UNIT V/s V/s V/s V/s V/s V/s
VCC IF 1 B A VFF 2 3 4 GND Single channel VCC 8 VE 7 6 5 VO 0.5 V RL 0.1 F bypass Output VO monitoring node V CM 0 V VO 5 V VCM (PEAK) Switch AT A: IF = 0 mA VO (min.) Switch AT A: IF = 7.5 mA VO (max.) CMH
VOUT
CML
VCM + Pulse generator ZO = 50
18976-2
Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity
www.vishay.com 178
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84732 Rev. 1.3, 06-Oct-08
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
High Speed Optocoupler, 10 MBd
Vishay Semiconductors
IF Dual channel B 1 A 2 VFF 3 4 GND VCM + Pulse generator Z O = 50 7 6 5 VCC 8 VCC RL 0.1 F bypass Output VO monitoring node
18977-1
Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity
SAFETY AND INSULATION RATINGS
PARAMETER Climatic classification Comparative tracking index Peak transient overvoltage Peak insulation voltage Safety rating - power output Safety rating - input current Safety rating - temperature Creepage distance Clearance distance Creepage distance Clearance distance Insulation thickness, reinforced rated standard DIP-8 standard DIP-8 400 mil DIP-8 400 mil DIP-8 per BSI 60950 TEST CONDITION according to IEC 68 part 1 CTI VIOTM VIORM PSO ISI TSI 7 7 8 8 0.2 175 8000 890 500 300 175 SYMBOL MIN. TYP. 55/100/21 399 V V mW mA C mm mm mm mm mm MAX. UNIT
Note As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits.
Document Number: 84732 Rev. 1.3, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 179
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
Vishay Semiconductors
TYPICAL CHARACTERISTICS
Tamb = 25 C, unless otherwise specified
High Speed Optocoupler, 10 MBd
ICCI - Low Level Supply Current (mA)
1.7
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 - 40 - 20 0 20 40 60 80 100 VCC = 5 V IF = 10 mA VCC = 7 V IF = 10 mA
VF - Forward Voltage (V)
1.6 1.5 1.4 1.3 1.2 1.1 1.0 - 40 - 20 IF = 10 mA
IF = 50 mA IF = 20 mA
IF = 1 mA
0
20
40
60
80
100
17610
Tamb - Ambient Temperature (C)
17614
Tamb - Ambient Temperature (C)
Fig. 6 - Forward Voltage vs. Ambient Temperature
Fig. 9 - Low Level Supply Current vs. Ambient Temperature
1.60 1.55
ICCH - High Level Supply Current (mA)
3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 - 40 - 20 VCC = 5 V IF = 0.25 mA VCC = 7 V IF = 0.25 mA
VF - Forward Voltage (V)
1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 0 5 10 15 20 25 30 35 40 45 50
0
20
40
60
80
100
17611
IF - Forward Current (mA)
17615
Tamb - Ambient Temperature (C)
Fig. 7 - Forward Voltage vs. Forward Current
Fig. 10 - High Level Supply Current vs. Ambient Temperature
7
ITH - Input Threshold on Current (mA)
2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 - 40 - 20 RL = 4 k RL = 1 k RL = 350
IR - Reverse Current (nA)
6 5 4 3 2 1 0 - 40 - 20 VR = 5 V
0
20
40
60
80
100
0
20
40
60
80
100
17613-1
Tamb - Ambient Temperature (C)
17616
Tamb - Ambient Temperature (C)
Fig. 8 - Reverse Current vs. Ambient Temperature
Fig. 11 - Input Threshold On Current vs. Ambient Temperature
www.vishay.com 180
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84732 Rev. 1.3, 06-Oct-08
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
High Speed Optocoupler, 10 MBd
Vishay Semiconductors
ITH - Input Threshold off Current (mA)
2.6 2.5 2.4 2.3 2.2 RL = 4 k 2.1 RL = 1 k 2.0 - 40 - 20 0 20 40 60 80 100 RL = 350
IOH - High Level Output Current (nA)
50 45 40 35 30 25 20 15 10 5 0 - 40 - 20 0 20 40 60 80 100
17617
Tamb - Ambient Temperature (C)
17620
Tamb - Ambient Temperature (C)
Fig. 12 - Input Threshold Off Current vs. Ambient Temperature
Fig. 15 - High Level Output Current vs. Ambient Temperature
VOL - Low Level Output Voltage (V)
0.30
5.5
Vo - Output Voltage (V)
0.25 0.20 0.15
VCC = 5.5 V IF = 5 mA
IL = 16 mA IL = 13 mA
5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 RL = 4 k 0
17621
IL = 10 mA 0.10 0.05 0.00 - 40 - 20 IL = 6 mA
RL = 350 RL = 1 k
0.0 0 20 40 60 80 100 1 2 3 4 5
17618
Tamb - Ambient Temperature (C)
IF - Forward Input Current (mA)
Fig. 13 - Low Level Output Voltage vs. Ambient Temperature
Fig. 16 - Output Voltage vs. Forward Input Current
IOL - Low Level Output Current (mA)
60
tP - Propagation Delay time (ns)
120 tPLH, 4 k 100 80 60 40 20 0 - 40 - 20 tPLH, 350 tPLH, 1 k
50 40 30 20 10 0 - 40 - 20
IF = 5 mA IF = 10 mA
tPHL, 350
tPHL, 1 k tPHL, 4 k
0
20
40
60
80
100
17622
0
20
40
60
80
100
17619
Tamb - Ambient Temperature (C)
Tamb - Ambient Temperature (C)
Fig. 14 - Low Level Output Current vs. Ambient Temperature
Fig. 17 - Propagation Delay vs. Ambient Temperature
Document Number: 84732 Rev. 1.3, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 181
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
Vishay Semiconductors
High Speed Optocoupler, 10 MBd
tP - Propagation Delay time (ns)
120 100 80 tPLH, 350 60 40 20 0 5 7 9 11 13 15 tPHL, 350 tPHL, 1 k tPHL, 4 k tPLH, 1 k
300
tr, f - Rise and Fall Time (ns)
tPLH, 4 k
tr, RL = 4 k 250 200 150 100 tr, RL = 1 k 50 tr, RL = 350 0 20 40 60 80 100 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k
0 - 40 - 20
17626
17623
IF - Forward Current (mA)
Tamb - Ambient Temperature (C)
Fig. 18 - Propagation Delay vs. Forward Current
Fig. 21 - Rise and Fall Time vs. Ambient Temperature
PWD - Pulse Width Distortion (ns)
50 40 30 20 RL = 1 k 10 0 - 40 - 20 RL = 350 RL = 4 k
300
tr, f - Rise and Fall Time (ns)
tr, RL = 4 k 250 200 150 100 tr, RL = 1 k 50 0 tr, RL = 350 5 7 9 11 13 15 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k
0
20
40
60
80
100
17627
17624
Tamb - Ambient Temperature (C)
IF - Forward Current (mA)
Fig. 19 - Pulse Width Distortion vs. Ambient Temperature
Fig. 22 - Rise and Fall Time vs. Forward Current
PWD - Pulse Width Distortion (ns)
60 50 RL = 4 k 40 30 20 10 0 5 7 9 11 RL = 350 13 15 RL = 1 k tE - Enable Propagation Delay (ns)
60 50 tELH = 4 k 40 30 20 10 tELH = 1 k tELH = 350 tEHL = 350
17625
IF - Forward Current (mA)
tEHL = 1 k tEHL = 4 k 0 - 40 - 20 0 20 40 60 80 Tamb - Ambient Temperature (C) 17628
100
Fig. 20 - Pulse Width Distortion vs. Forward Current
Fig. 23 - Enable Propagation Delay vs. Ambient Temperature
www.vishay.com 182
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84732 Rev. 1.3, 06-Oct-08
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
High Speed Optocoupler, 10 MBd
Vishay Semiconductors
PACKAGE DIMENSIONS in inches (millimeters)
Pin one ID 4 0.255 (6.48) 0.268 (6.81) 5 6 7 8 ISO method A 3 2 1
0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 4 typ. 0.130 (3.30) 0.150 (3.81) 0.230 (5.84) 0.050 (1.27) 0.020 (0.51) 0.035 (0.89) 0.100 (2.54) typ. 10 3 to 9 0.008 (0.20) 0.012 (0.30) 0.110 (2.79) 0.130 (3.30) 0.250 (6.35) 0.031 (0.79) 0.300 (7.62) typ.
0.018 (0.46) 0.022 (0.56)
i178006
Option 6
0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4)
Option 7
0.300 (7.62) typ.
Option 9
0.375 (9.53) 0.395 (10.03 ) 0.300 (7.62) ref.
0.028 (0.7)
0.180 (4.6) 0.160 (4.1) 0.315 (8.0) min.
0.0040 (0.102) 0.0098 (0.249) 0.020 (0.51 ) 0.040 (1.02 ) 0.315 (8.00) min.
0.012 (0.30 ) typ.
0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92)
0.331 (8.4) min. 0.406 (10.3) max.
15 max.
18450
Document Number: 84732 Rev. 1.3, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 183
6N137, VO2601, VO2611, VO2630, VO2631, VO4661
Vishay Semiconductors
High Speed Optocoupler, 10 MBd
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com 184
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84732 Rev. 1.3, 06-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of VO2611-X006

	To Download VO2611-X006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .