 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CORCOM Product Guide Highest Performance RFI Filters for Switching Power Supply Emissions down to 10 kHz Q Series Q8-6A UL Recognized CSA Certified VDE Approved Q1 Q3 Q Series This series of RFI power line filters has been developed specifically for switching power supplies and is designed to be all the power line filtering needed to control conducted emissions all the way down to 10kHz. High attenuation is provided for both common mode and differential mode interference throughout the frequency range with no degradation of performance due to the large peak currents drawn by switching power supplies. These filters are an ideal choice for applications that must meet emission limits below 150kHz, as well as the mandated limits above 150kHz. In most cases they will bring such equipment into compliance with the B-level limits of CISPR 22. They are also well suited for bringing ISM equipment (such as ultrasonic cleaners) into compliance with the limits of FCC Part 18, from 10kHz to 30MHz. The EQ models meet the very low leakage current requirements VDE portable equipment, and (120 Volt) UL544 non-patient medical equipment. The VQ models offer higher common mode performance at the expense of higher leakage current, but still meet the leakage current limits of UL, CSA, and VDE non-portable equipment. Specifications Maximum leakage current,each line-to-ground VQ Models @ 120 VAC 60 Hz (3A, 20A): .73 mA @ 120 VAC 60 Hz (6A): -- @ 250 VAC 50 Hz (3A, 20A): 1.27 mA @ 250 VAC 50 Hz (6A): -- Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage (max.): Rated current: 3VQ/3EQ 6EQ 20EQ1/20VQ1 Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating 3VQ 3EQ 6EQ 20EQ1 20VQ1 .01 22 22 26 6 6 Frequency-MHz .02 .05 .15 .5 1 5 27 27 31 10 3 37 36 20 8 17 50 47 68 39 52 55 47 72 60 65 55 43 72 65 70 55 45 65 65 70 10 50 45 65 65 70 EQ Models .22 mA .29 mA .38 mA .51 mA 2250 VDC 1450 VDC 50/60 Hz 250 VAC 3A 6A 20A 30 55 45 65 55 70 Electrical Schematics 3EQ & 3VQ Models LINE LOAD Line-to-line in 50 ohm circuit Current Rating 3VQ 3EQ 6EQ 20EQ1 20VQ1 .01 1 1 6 15 15 Frequency-MHz .02 .05 .15 .5 1 5 17 17 10 20 20 42 42 43 20 20 65 65 70 46 46 75 75 75 65 65 75 75 75 70 70 60 65 65 65 65 10 65 65 55 60 60 30 65 60 55 60 60 6EQ & 20EQ Models LINE LOAD Line Cord Resistor location for reference only. Line Cord No. GA400: 7 1/2 foot, 3-conductor line cord to mate with Q8 models. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 1-508-992-4495 Germany: 49-89-6089-0 www.cor.com www.tycoelectronics.com 76 Catalog 1654001 Revised 03-04 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. CORCOM Product Guide Highest Performance RFI Filters for Switching Power Supply Emissions down to 10 kHz (Continued) Q Series RFI Power Line Filters Case Styles Q1 3, 20 Amp Models 6A-Q8 & Q8M (with metric insert) Tapped insert: No. 6-32 x 1/4 (3)-Q8 No. M-3 x .5 (3)-Q8M Grn/Yel C 0.63 Ref 16.0 .313 Ref 7.95 B Blue Brown D E A B C 6 Amp Models E A D B Case Dimensions C Typical dimensions: Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4) Mounting Holes: .188 [4.78] Dia. (2) Slot: .07 x .16 [1.8 x 4.1] Part No. 3VQ1, 3EQ1 3VQ3, 3EQ3 3VQ8, 3VQ8M 3EQ8, 3EQ8M 6EQ1 A (max) 3.85 97.8 2.56 65.0 3.07 78.0 4.98 126.5 3.69 93.7 5.47 138.9 6.66 168.1 B (max) 2.07 52.6 2.07 52.6 2.25 57.2 2.27 57.7 2.27 57.7 2.07 52.6 2.07 52.6 C (max) 1.78 45.2 1.78 45.2 1.78 45.2 1.80 45.7 1.80 45.7 1.78 45.2 2.28 57.9 D .015 .38 E (max) 3.34 84.8 3.34 84.8 0.63 16.0 4.47 113.5 4.47 113.5 2.70 68.0 6.03 153.2 .02 [.5] Q3 3 Amp Models Blue Blue Blue 2.938 74.63 2.938 74.63 1.575 40.01 4.063 103.2 4.063 103.2 1.575 40.01 5.625 142.9 Grn/Yel Grn/Yel Brown Brown Brown B A D E C 6 Amp Models 6EQ3 6EQ8, 6EQ8M B Blue Grn/Yel Brown 20EQ1,20VQ1 C Typical dimensions: Wire leads: 4.0 [101.6] Min. Mounting Holes: .188 [4.78] Dia. (2) 3A-Q8 & 8Q8M (with metric insert) Tapped insert: Brown Grn/Yel Blue No. 6-32 x 1/4 (2)-Q8 No. M-3 x .5 (2)-Q8M Part Numbers 03EQ1 03EQ3 03EQ8 03EQ8M 06EQ1 06EQ3 06EQ8 06EQ8M 20EQ1 Line Cord: 03VQ1 03VQ3 03VQ8 03VQ8M 20VQ1 DB A C .235 R 5.96 E .157 Dia. (2) 3.98 .910 23.11 GA400 Typical dimensions: Wire leads: 6.0 [152.4] Min. 1.295 32.89 1.575 40.01 Panel Cutout (back mount) Tolerance .005 [0.13] 77 Catalog 1654001 Revised 03-04 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 1-508-992-4495 Germany: 49-89-6089-0 www.cor.com www.tycoelectronics.com |
Price & Availability of 20VQ1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |