|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
M3T-DUMMY80 Dummy IC for 80-pin 0.8mm-pitch QFP (80P6N-A) Function This accessory tool connects the probe of an emulation pod and the target, or an MCU and the target. Its dimensions are the same as those of MCU for the 80-pin 0.8mm-pitch QFP (80P6N-A) package. It consists of (1) to (3) shown in the diagram. Dimensions Attaching Procedure This converter can be used during debugging and board-mounted evaluation in common. When debugging (1) Mount a socket on the target. (2) On top of it, mount the M3T-DUMMY80 and a socket frame in that order. (3) Then connect the probe of the emulation pod to the connector provided at the top of the M3T-DUMMY80. During board-mounted evaluation Mount an MCU and a socket frame on a socket on the target in that order. denotes pin numbers on the M3T-DUMMY80. denotes pin numbers of the top of a connector. Symbol A b D E e HD HE M Term Fitting height Pin width Package length Package width Interval in row of pins Overall length Overall width Mount pad size Dimensions [mm] 5.0 0.3 14.0 20.0 0.8 18.0 24.0 6.3 Foot Pattern Reference Dimensions See Appendix B "Reference Dimensional Drawing for Common 80-pin 0.8mm-pitch QFP Foot Pattern". [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. |
Price & Availability of M3T-DUMMY80 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |